2. Swurfer
  3. SWBKT

Swurfer SWBKT Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Swurfer SWBKT Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
WARNING: Regularly check your swing-set and conversion bracket for tight secure fit.
Attach swings and accessories following manufacturers instructions.
@TheSwurfer Swurfer.com
Distributed by
Ellenville, NY 12428 All rights reserved. 2018
Swurfer Swing Set conversion Bracket
installation instructions:
1. Loosen up the screws on the angle brackets so that you are able to slip em’ around.
2. Get that bracket on the swing beam!
3. Mark beam where hole in bracket is and drill through the beam with 1/2” drill bit.
4. Shimmy the bolt on through the bracket and the beam.
5. Slide the angle bracket so that they are lined up nice with the beam!
6. Throw on that washer and lock nut!
7. Make sure they’re nice and tight and ready to Swurf!
*Tensile Strength 150 LB
Visit www.swurfer.com
SW-BRKT-GR
SW-BRKT-BR
/