Tosca 100084 User manual

Brand: Tosca

Model: 100084

Type: User manual

www.homewerksww.com

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-319-3757, 7:30 a.m. - 4:30 p.m., CST, Monday - Friday.

LED DIMMABLE MIRROR

WITH ANTI-FOG GLASS

MODELS 100096, 100084, 100090,

100099, 100102, 100105

ROUND LED DIMMABLE

MIRROR WITH ANTI-FOG GLASS

MODEL 100108

COLOR CHANGING LED

MIRROR WITH ANTI-FOG GLASS

MODELS 100087, 100093

06-06-2019

READ AND SAVE THESE INSTRUCTIONS

www.homewerksww.com

TABLE OF CONTENTS

Preparation ........................................................................................................................................................................................................................ 2

Safety Information .............................................................................................................................................................................................................2

Package and Hardware Contents......................................................................................................................................................................................2

Recommended Tools ......................................................................................................................................................................................................... 3

Wiring Diagram ..................................................................................................................................................................................................................3

Cord Placement .................................................................................................................................................................................................................3

Installation Instructions ...................................................................................................................................................................................................... 4

Operating Instructions ....................................................................................................................................................................................................... 4

Care and Maintenance ...................................................................................................................................................................................................... 4

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents. If any part is

missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

1. Always disconnect the power supply prior to installing, servicing or removing the LED mirror.

2. Installationworkmustbecarriedoutbyaqualiedperson(s)inaccordancetoalllocalandsafetycodesincludingtherulesforreratedconstruction.

3. Followalllocalbuilding,safetyandelectricalcodesaswellasNEC(NationalElectricalCode)andOSHA(OccupationalSafetyandHealthAct).

4. Electric service supply must be 120 volts, 60 hertz.

5. This unit must be properly grounded.

6. Do not bend or kink the power wires.

7. Exercise care to not damage existing wiring when cutting or drilling into walls or ceilings.

8. Avoid putting sharp or hard objects against mirror surface. Damage and/or electrical injury may occur if punctured.

9. Turn product off during storms or power surge scenarios as power surges may damage internal components.

10. For model #100108 with wall plug, never forcibly pull the plug from the wall, remove gently to avoid unnecessary stress to the wires. For all other

hardwire models, please consult a professional electrician for installation.

11. If not being used for extended periods of time, ensure power is disconnected.

PACKAGE AND HARDWARE CONTENTS

PART DESCRIPTION QTY

A LED mirror 1

B Wall anchors 3

C Z-bar screws 3

D Z-bar 1

E Wire connectors 3

www.homewerksww.com

RECOMMENDED TOOLS (NOT INCLUDED)

Safety goggles Tape

measure

Phillips

Screwdriver

Electric drill

and drill bits

Level Pencil Hammer Electrical

tape

WIRING DIAGRAM

Mirror

House

black

white neutral

ground

live

white

green green

Installations may vary depending on how the previous mirror was installed and the presence of a power source. Supplies necessary for installation of

your new mirror are not all included; however, most are available at your local home improvement or hardware store.

CORD PLACEMENT

Item # Size(in.)HxW A(in.) B(in.) WireLength(in.)

Back View Back View

100099 30 x 24 8.5 8.5 35.4

100102 36 x 30 13.2 13.2 35.4

100105 30 x 24 19.4 7.9 39.4

100096 30 x 24 12 8.5 35.4

100087 30 x 24 6.9 6.9 35.4

100093 36 x 30 6.9 6.9 39.4

100084 30 x 24 6.9 6.9 35.4

100090 36 x 30 6.9 6.9 35.4

100108 Ø23 17.3 11.7 39.4

www.homewerksww.com

INSTALLATION INSTRUCTIONS

INSTALLING THE Z-BAR FOR HANGING MIRROR

PlacetheZ-bar(D)atthedesiredlocationonthewall,usingalevelfor

nalpositioning.MarkthelocationofthethreeholesintheZ-bar(D)on

the wall. Drill 1/4 in. holes at the marked locations and insert included

wallanchors(B).SecureZ-bar(D)tothewallwiththreeincluded

screws(C).

Vertical mount

FIGURE 1

MIRROR WIRING

LocatetheWhite(neutral),Black(live)andGreen(ground)wiresare

extended from the cord in the back of the mirror. With the power turned off,

connect the wires on the mirror with the neutral, live and ground house

wireswithwireconnectors(included).

ATTENTION – 100108 ROUND MIRROR: This model includes three

prong plug - disregard wiring diagram and plug into GFCI where

required by local code.

IMPORTANT NOTE: Follow all local electrical and building codes when

wiring your device and consult an electrician.

Mirror

House

black

white neutral

ground

live

white

green green

HANG AND SECURE THE MIRROR

HangmirrorontheZ-bar(D),centeringitandensuringthatitissecurely

hanging(seeFIGURE2).

MIRROR INSTALLATION CONFIGURATIONS:

Vertical or Horizontal - Models:

100087, 100093, 100084, 100090, 100096

Vertical only - Models:

100108, 100099, 100102, 100105

FIGURE 2

OPERATING INSTRUCTIONS

DIMMABLE LED LIGHT (100096, 100084, 100090, 100099, 100102, 100105): To turn the mirror light ON, press the switch on the mirror, hold on three

secondstobegindimmable,tondyourdesiredbrightness,continuepressingtheswitch , the light will turn from 100% to 10%. Repeat until desired

brightness is discovered.

ROUND DIMMABLE LED LIGHT (100108): To turn the mirror light ON, press the switch on the mirror, hold on three seconds to begin dimmable,

tondyourdesiredbrightness,continuepressingtheswitch , the light will turn from 100% to 10%. Repeat until desired brightness is discovered.

TAP-TAP COLOR CHANGING LED LIGHT (100087, 100093): To turn the mirror ON, press the switch on the mirror, it will turn on with warm

light, when you press again, it will change white color, the third press will turn off.

NOTE:Allmirrorlightshavememory.Whenyousetyourdesiredbrightnessorcolortemperture(dependingonwhichmodelyouhave)andyouturnoffthe

mirror at the wall switch it will save your last setting. When the wall switch is turned back on, the mirror will light to the last setting.

CARE AND MAINTENANCE

When cleaning your LED mirror, a mild non-abrasive glass cleaner is recommended. Apply to a soft cloth or paper towel. CAUTION: Do not spray

cleanser directly onto the mirror or frame.