Contec CPS-HBL-8005F Owner's manual

Brand: Contec

Model: CPS-HBL-8005F

Type: Owner's manual

Contec CPS-HBL-8005F is a 5-port 10/100M Unmanaged Industrial Switching HUB that provides reliable and efficient network connectivity for industrial applications. It features auto-negotiation and MDI/MDI-X functions, allowing for easy and flexible integration into existing networks. With its compact size, DIN rail mounting design, and wide operating temperature range, the CPS-HBL-8005F is ideal for harsh industrial environments. Additionally, it supports store-and-forward switching, ensuring reliable data transmission and minimizing packet loss.

CPS-HBL-8005F Setup Guide

5 port 10/100M Unmanaged

Industrial Switching HUB

CPS-HBL-8005F Setup Guide

CONTEC CO., LTD.

CPS-HBL-8005F is a compact-sized industrial switching HUB unit that is compliant with the IEEE802.3u (100BASE-

TX)/IEEE802.3 (10BASE-T) standards.

Product configuration list

Main Unit(CPS-HBL-8005F) …1

Power Supply Connector…2

Serial Number Label…1

Setup Guide(English) …1

Warranty certificate…1

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently and comfortably.

Download the latest drivers from CONTEC’s Web site to use. In addition, as documents such as precautions are also

provided on the Web site, have a look on CONTEC’s Web site.

Name of unit Components and Function

Figure sho ws t he no mencla tur e of u nit co mpone nts.

LED Indicators

Name

Color

Content of Display

POWER LED Green

ON : Po wer ON

OFF : Power OFF

SPEED LED Orange

ON : 100Mbps Link

OFF : 10Mbps Link, or no link

LINK/ACT LED Green

ON : Link

Flashing : ACT (Data send / Receive)

OFF : No link

Power supply Connector

Pin number

Signal

Description

Vi+

Power (12 - 24VDC±5%)

Vi-

Power (GND)

Frame Ground

10BASE-T/ 100BASE-TX Port

Pin number Signal Description

TXP Send (+)

TXN Send (-)

RXP Receive (+)

- No Use

RXN Receive (-)

- No Use

Mounting on a DIN rail

How to Unlock the Fixed Hooks 1

(1) Insert a slotted screwdriver (the point should be smaller than 4.5mm) into a hole (see the figure below).

(2) By using the screwdriver as leverage, move it upward in the direction of the arrow to unlock.

How to Unlock the Fixed Hooks 2

If your slotted screwdriver is not suitable for the hole.

(1) Place the slotted screwdriver (the point should be smaller than 8mm) as shown in the figure.

(2) Rotate the screwdriver 90-degree in either direction.

How to mount

(1) Pull down the fixed hook at the bottom to unlock. The top hook should remain locked.

(2) Hang the product on the upper part of the DIN rail, and press it to the lower side of the DIN rail.

(3) Push up the hook to lock.

The product could also be mounted with the top hook unlocked and bottom hook remains locked.

Confirm whether the product has been securely mounted onto the DIN rail.

x 2

XXXXXXXXXXXXX

Serial Number Label

Setup Guide

Warranty Certificate

Power Supply Connector

Main Unit

Warranty

Certificate

SPEED LED

LINK/ACT LED

10BASE-T/100BASE-TX port

Power supply connector

POWER LED

Vi+

Vi-

12-24VDC

Using this point as the fulcrum,

move the fixed hook by way of

the principle of leverage.

Insert the slotted screwdriver (point: 8mm or smaller)

into the position shown in the figure

(between the casing and the arch of the fixed hook).

Rotate the slotted screwdriver.

CAUTION

CPS-HBL-8005F Setup Guide

Network Cables

Cables meeting the following specifications should be used:

- 10BASE-T : Equal to greater than Category 3 UTP, STP cable 100m or less

- 100BASE-TX : Equal to greater than Category 5 UTP, STP cable 100m or less

- There are straight/cross UTP and STP cables. Auto MDI/MDI-X feature allows connection of your Switching HUB

unit to a personal computer (LAN adapter) or another HUB unit and a bridges using either a straight or cross cable.

Inspection

Inspect the product periodically as follows to use it safely.

Neither dust nor alien substance is attached to the ventilation slits.

FCC PART15 Class A Notice

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

EN55032 Class A Notice

Warning: Operation of this equipment in a residential environment could cause radio interference.

The caution when you register UL for your system with this product

- Use POA201-10-2 of the optional products.

Specifications

Item

Specifications

Ethernet standards

IEEE802.3/IEEE802.3u

–

compliant

Data transfer rate

10Mbps/100Mbps (auto-negotiation)

Access method

CSMA/CD

Communications method

All ports: Full/Half duplex (auto-negotiation)

Topology

Star topology

Flo w control

Full Duplex : IEEE802.3x compliant flow control

Half Duplex : Back pressure

Number of effective ports

Switching method

Store and forward

Filtering Speed

8,130pps (at 10Mbps) / 148,800pps (at 100Mbps)

Forwarding Speed

8,130pps (at 10Mbps) / 148,800pps (at 100Mbps)

Address table

1,024 entries

Buffer capacity

448Kbits

Aging time

300sec (Max.)

LED Indicators

POWER (Green), LINK/ACT (Greed), SPEED 10/100M (Orange)

Power supply voltage

12V - 24VDC±5%

Hybrid supply system*1

Enable

Reverse polarity protectio n

Enable

FG pin

Power supply connector equipped with FG pin

Power consumption (Max.)

When inputting 12V : 0.04A, When inputting 24V : 0.02A

Physical dimensions (mm)

25.2(W) x 94.7(D) x 124.8(H) (exclusive of protrusions)

Material of the case

Plastic shell

Weight

170g

Module installation method

Attachment of a 35mm DIN rail.

*1 This product can operate with a single powe r supply. Also, you can add redundancy to the power supply b y adding

a second powe r supply input.

Installation Environment Requirements

Item

Specifications

Operating tempe rature

-20 - 60°C

Storage temperature

-20 - 60°C

Humidity

10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-Noise

resistance

Line-noise

AC line/2kV, Signal line/1kV (JIS C61000-4-4Level 3, EN61000-4-4Level 3)

Static electricity

resistance

Contact discharge/4kV (JIS C61000-4-2Level 2, EN61000-4-2Level 2)

Atmospheric discharge/8kV (JIS C61000-4-2Level 3, EN61000-4-2Level 3)

Vibration

resistance

Sweep

resistance

10 - 57Hz/semi-amplitude 0.15mm,57 - 150Hz/2.0G

40minutes each in X, Y, and Z directions

(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)

Impact resistance

15G, half-sine shock for 11ms in X, Y, and Z directions

(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)

International Protection

IP20

Grounding

Class D grounding (previous class 3 grounding)

Standard

VCCI Class A, FCC Class A,

CE Marking (EMC Directive Class A, RoHS Directive), UL

Physical Dimensions

Handling Precautions

- Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in an explosion, fire, electric shock, or failure.

- Do not allo w this devic e to come into contac t with foreign subs tances (metal particles, flammable s ubstances, liq uids, etc.) This can caus e fire or electrical shock.

- Do not place this device in an unstable location or use incomplete mountings. This may cause the device to fall.

- Be sure to connect the product to the stipulated power supply voltage. Connecting to a different voltage might cause a fire or electrical shock.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other applications that require a very high level of reliability. Do not use

the p roduct in such app licatio ns.

- If us ing this prod uct in app licatio ns where s afety is critic al such as in railways, auto motive, o r disaster p revention or security systems, please contact your retailer.

- The link speed value (e.g., 100Mbps) of the transmission rate used in the Manual (this document) is the theoretical maximum value of the wired LAN standard and do

not indicate t he actual data trans miss io n spe ed.

- The frame loss could occur depending on the connection destination or ins talled environment.

- This product contains precision electronic elements and must not be used in locations subject to physical shock or strong vibration. Otherwise, the board may

malfunction, overheat, or cause a failure.

- Avoid transporting this products state to shock or vibration that exceeds range of specific ation.

- Do not use or store the equipment in a hot or cold place, or in a place that is subject to severe temperature changes. They may cause the malfunction, heat generation,

fault, or damage.

- Do not use or store the equipment in a place subject to direct sunlight or near a heating devic e, such as a stove. And do not use or store the product near equipment

generating a strong magnetic field or radio waves. They may cause the malfunction, heat generation, fault, or damage.

- Do not use or store this product in the presence of chemicals.

- Use the product in the specified operating condition (temperature, humidity, vibration and shock)

- Please adjust the air current to prevent the reject heat from the product staying around the product.

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this product with its interio r penetrated by water o r any other fluid or

conductive dust. If this product must be used in such an environment, install it on a dust-proof control panel, for example.

- If you noticing abnormal odor or overheat, please unplug the power cord immediately.

- When you find faults or abnormalities (bad smell or excessive heat), pull the power cord off, then contact the shop you bought the product or your retailer.

- When using one power supply input, do not touch the unconnected power supply connector. Doing so may result in electric shock or failure.

- When placing importance on line-noise r esis tanc e, us e shielded cab les to connect to perip hery d evices.

- The product could be very hot in the operation. P lease do not to uch b y hands or body. It may caus e burns .

- To avoid elec tric shock, please do not touch the system with a wet hand.

- Do not open the unit casing. CONTEC will disclaim any responsibility for equipment whose casing has been opened.

- Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting from modifying this product.

- To clean this product, gently wipe it with a soft cloth so aked with water or a neutral detergent. Do not use benzene, a thinner, or other volatile solvents as they can caus e

the coating to discolor or peel off.

- When connecting cables, first check the shapes of connectors (such as LAN connectors), and then insert them in the correct orientation. After they are connected, do not

put too much load on the connected part. Doing so may result in poor contact or damage to this product and the connected part.

- Do not touch metal parts or terminals of the product with your hands in operation. Otherwise, this product may malfunction, overheat, or cause a failure.

- The spec ific ation of this product is subject to change without notice for enhancement and quality improvement. Even when using this product continuous ly, b e sure to

read the manual of CONTEC’s website and understand the contents.

- If you move or transfer the product, make sure to attach the Setup Guide (this document).

- To use the product in places affected by overcurrent or overvoltage (lightning surge, etc.), select appropriate surge protection device (SPD) for all entry paths (power line,

LAN, ground, etc.). For selection/introd uction/ins tallatio n o f SP D, pleas e consult a specialist.

- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever (including damages for loss of business profits) arising out of the use or