Intermec CN3NI Operating instructions

CN3NI
Intermec
Brand
Intermec
Model
CN3NI
Type
Operating instructions

This manual is also suitable for

CN3NI
Dust Clip Instructions
Use these instructions to attach the dust clip to both the CN3 and CN3e
mobile computers. The dust clip seals out dust and airborne particles from
the CN3NI in Division 2 Class II and III environments.
CN3NI Computers: This illustration shows the CN3 Series Mobile Computers with
the dust clip properly installed.
Make sure the dust clip completely covers the docking
connector on the CN3 or CN3e and that it snaps into place.
CN3NI Dust Clip Instructions
*943-167-001*
P/N 943-167-001
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2008 Intermec Technologies
Corporation. All rights reserved.
2
3
1
  • Page 1 1
  • Page 2 2

Intermec CN3NI Operating instructions

CN3NI
Intermec
Brand
Intermec
Model
CN3NI
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents