2. Intermec
  3. CN3E Series
CN3E Series

Intermec CN3E Series, CN3 Series, CN3NI Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Intermec CN3E Series Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CN3NI
Dust Clip Instructions
Use these instructions to attach the dust clip to both the CN3 and CN3e
mobile computers. The dust clip seals out dust and airborne particles from
the CN3NI in Division 2 Class II and III environments.
CN3NI Computers: This illustration shows the CN3 Series Mobile Computers with
the dust clip properly installed.
Make sure the dust clip completely covers the docking
connector on the CN3 or CN3e and that it snaps into place.
CN3NI Dust Clip Instructions
*943-167-001*
P/N 943-167-001
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2008 Intermec Technologies
Corporation. All rights reserved.
2
3
1
/