- 1 -
Important Cautions
Thank you for purchasing this system. Please read these operating instructions before operating
the unit. The operating instructions should be retained for future reference.
For your safety
This symbol indicates that there are
important operating and mainte-
nance instructions in the literature
accompanying this unit.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER. NO USER SERVICEABLE
PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Laser Product
This product is equipped with low power la-
ser equipment. For your own safety do not
remove any covers or take the product apart.
Repair work must be carried out by qualified
personnel.
The rating label is located on the base of the
amplifier unit.
Caution:
This product is equipped with low power
laser equipment inside, for your safety, don’t
open the laser radiation protective
equipment. Don’t look at the laser radiation
district when the equipment is operating.
CLASS 1
LASER PRODUCT
Precautions
This equipment has been designed and manufactured to meet international safety standards but,
like any electrical equipment, care must be taken if you are to obtain the best results and safety is
to be assured.
……………………………
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and
interconnections between the pieces of equipment) are properly made and in accordance with
the manufacturer’s instructions. Switch off and withdraw the mains plug before making or
changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on equipment
……………………………
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with
liquids, such as vases, to be placed on the equipment and don’t handle the power cord with
wet hands.
DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close
to equipment. High temperatures can melt plastic and lead to fires.
- 2 -
DON’T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety
always fit the manufacturer’s approved stand or legs with the fixings provided according
to the instructions.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T leave equipment switched on when it is unattended unless it is specifically stated
that it is designed for unattended operation or has a standby mode. Switch off using the
switch on the equipment and make sure that your family knows how to do this. Special
arrangements may need to be made for infirm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it
is damaged in any way - switch off, withdraw the mains plug and consult your dealer.
……………………………
ABOVE ALL,
NEVER let anyone especially children push anything into holes, slots or any other opening in the
case - this could result in a fatal electrical shock.
NEVER guess or take chances with electrical equipment of any kind…it is better to be safe than
sorry!
Correct Handling of Batteries
Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
Use only the types of the batteries which are indicated in this manual.
Do not install new batteries with used ones.
Install the batteries correctly by following the polarity (+ and -) indications in the battery compartment.
Do not dispose of the used batteries as domestic waste. Dispose of them in accordance with the
local regulations.
Small button cell batteries such as used in the remote handset for this unit are easily swallowed
by young children and this can be dangerous. Keep loose button cells away from young children
and make sure that the battery holder tray is secure in the remote control. Seek medical advice if
you believe a cell has been swallowed.
- 3 -
Table of Contents
Important Cautions .............................................................................................................................. 1
For your safety ........................................................................................................................................... 1
Precautions ................................................................................................................................................. 1
Correct Handling of Batteries ..................................................................................................................... 2
Package Contents .............................................................................................................................. 4
Product Overview .............................................................................................................................. 5
The CD/MP3 Player .................................................................................................................................... 5
The Amplifier ............................................................................................................................................... 5
Remote Control Overview .................................................................................................................. 6
Installation of Battery .......................................................................................................................... 7
Connections ........................................................................................................................................ 8
Connecting the Antenna .............................................................................................................................. 8
Connecting the Speakers ............................................................................................................................ 8
Connecting Control Cable ........................................................................................................................... 8
Connecting the iPod Docking ...................................................................................................................... 9
Connecting Auxiliary Equipment (AUX INPUT) ........................................................................................... 9
Connecting Auxiliary Equipment (LINE OUT) ............................................................................................. 9
Connecting the Headphones ....................................................................................................................... 9
Connecting the AC Power Plug ................................................................................................................. 10
Turning the Power On and Off ........................................................................................................ 10
Setting the Clock ............................................................................................................................... 10
Sound Quality ................................................................................................................................... 11
Adjusting the Volume ................................................................................................................................. 11
Adjusting the super bass ............................................................................................................................ 11
Control the Loudness ................................................................................................................................. 11
Preset Equalizer .......................................................................................................................................... 11
Changing the Vacuum Fluorescent Display (VFD) Darkness .................................................................... 11
Listening to Radio Broadcasts ......................................................................................................... 11
DAB Radio .................................................................................................................................................. 11
FM Radio ................................................................................................................................................... 13
Presetting Stations .................................................................................................................................... 13
To change the FM Reception Mode ........................................................................................................... 13
RDS (Radio Data System) Reception ...............................................................................................14
CD Operation .................................................................................................................................... 14
CD Playing ................................................................................................................................................ 14
Direct Select track .................................................................................................................................... 14
To Skip Search and Play ........................................................................................................................... 14
To Search ................................................................................................................................................... 14
Text Display During Playback ................................................................................................................... 14
Program Play ............................................................................................................................................ 15
Random Play (CD and MP3 discs) ........................................................................................................... 15
Playing the Beginning (Intro) of each Track ............................................................................................. 15
Playing Repeatedly ................................................................................................................................... 15
MP3 Disc Playing .............................................................................................................................. 15
Playing Repeatedly ................................................................................................................................... 16
Use the USB ..................................................................................................................................... 16
Use the iPod portable player ............................................................................................................ 17
Setting the Sleep Timer ..................................................................................................................... 17
Setting the Daily on Timer ................................................................................................................. 18
Disc Handling .................................................................................................................................... 19
Troubleshooting ................................................................................................................................ 20
Specifications ................................................................................................................................... 21
- 4 -
Package Contents
Make sure all of the following contents are included.
Speakers x 2
Instruction Manual
(P.N.: AXM136iP0006)
Control cable
(P.N.: AXM136iP0002)
Speaker cable x2
(P.N.: AXM136iP0003
Remote control
(P.N.: AXM136iP0001)The unit
i-Pod Docking
(P.N.: AXM136iP0008A)
DAB/FM Antenna
(P.N.: AXM136iP0004)
Stand
(P.N.: AXM136iP0005)
Addendum
(P.N.: AXM136iP0007)
iPod Dock Adaptor (NANO) (P.N.: AXM136iP0008B)
iPod Dock Adaptor (MINI) (P.N.: AXM136iP0008C)
iPod Dock Adaptor (20GB+U2) (P.N.: AXM136iP0008D)
iPod Dock Adaptor (20GB+30GB) (P.N.: AXM136iP0008E)
iPod Dock Adaptor (40GB) (P.N.: AXM136iP0008F)
iPod Dock Adaptor (VIDEO 30GB) (P.N.: AXM136iP0008G)
iPod Dock Adaptor (VIDEO 60GB) (P.N.: AXM136iP0008H)
iPod Dock Adaptor (PHOTO 40GB/60GB) (P.N.: AXM136iP0008I)
- 5 -
Product Overview
The CD/MP3 Player
1. Remote Sensor
2. Standby Button
3. Vacuum Fluorescent Display (VFD)
Display Lens
4. USB Port
5. Disc Door
6. Mode Button
7. Reverse Button D
Tuning Backward Button (-TUNING)
8. Fast Forward Button C
Tuning Forward Button (TUNING+)
9. Play/Pause Button BF
10. Stop Button L
11. Previous Button H
Preset Down Switch (-PRESET)
12. Next Button G
Preset Up Switch (PRESET+)
13. Open/Close Button K
14. Control Cable Connector
15. i-Pod Dock Terminal
16. Line Out Terminals (L&R)
17. AUX Input Terminals (L&R)
18. DAB/FM Antenna
The Amplifier
1. Loudness Button
2. Preset Equalizer Button
3. Volume Control Knob
4. Function Button
5. Headphone Jack
6. AC Power Cord
7. Control Cable Connector
8. Left & Right Speaker Output Terminals
Note: 2 pin Euro plug for EU model.
3 pin 13 amp plug for UK model.
- 6 -
Remote Control Overview
1. Standby
2. CD Function
3. Tuner Function
4. Random
5. Intro
Scan
6. Dim
7. Preset Equalizer
(P-EQ)
8. Clock
9. Next G
Preset Up Switch
10. Reverse D
Tuning Backward Button
11. Previous H
Preset Down Switch
12. Play/Pause BF
Confirm
13. Album Up
Album Down
14. Mute
15. Number
16. Program (PROG)
17. Open/Close K
18. USB
19. iPod
AUX
20. A-B
21. Mode
22. Loudness
23. Super Bass (S-BASS)
24. Sleep/Timer
25. Display
RDS
26. Fast Forward C
Tuning Forward Button
27. Stop L
28. Volume Up
Volume Down
- 7 -
Installation of Battery
Caution: Be careful when you press the slot of the battery compartment with your fingernails
only as this might break them.
1. Press the slot on the battery compartment.
2. Pull out the battery compartment.
3. Replace a new battery (size 2025) correctly and fully insert
the battery compartment back to the original position.
* Batteries contain chemical substances, so they should be
disposed of properly.
Handling the Remote Control
• Improper use could cause corrosion or battery leakage and may result in physical injury and/
or property damage including fire.
• Never mix used and new batteries in the device.
• Replace all the batteries in a device at the same time.
• Remove the batteries if the remote control is not going to be used for an extended period of
time.
• To avoid possible failure, read the following instructions and handle the remote control
property.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under the direct sunlight or near sources of excessive heat.
• Do not use caustic cleaners ( porcelain, stainless steel, toilet, or oven cleaner etc. ) on the
remote, as it may suffer damage.
Note:
Remove the battery from remote control handset when it is not to be used for a long period.
Otherwise it can be damaged due to leakage of battery.
Effective range
Do not:
Make sure that there is no obstacle
between the infrared receiver of the
unit and remote control.
Do not expose the infrared receiver to
direct sunlight or other strong light,
such as inverter fluorescent light.
Note:
If you install the unit on rack, etc., the
remote controllable range may decrease
depending on the thickness or colour of
glass door of rack.
- 8 -
Connections
Caution: Make all connections before plugging the system into an AC power outlet.
Connecting the Antenna
Connect the supplied DAB/FM antenna to the DAB/FM ANTENNA socket on the rear of the CD
player by turning the antenna’s screw cap clockwise.
Note: Do not overtighten, this could damage the antenna.
Caution: To avoid noise, keep antennas away from the system, the connecting cord and the AC
cord.
Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cords with a silver line to the (-) terminals and cords with a gold line to the (+) terminals.
Connecting Control Cable
Connect the control cable between the CD player
and the amplifier.
The Antenna
The Antenna
Terminal
Right Speaker Box
Back View
Left Speaker Box
Back View
- 9 -
Connecting the iPod Docking
This unit has an external i-Pod docking. You can connect your iPod portable player in the iPod
docking. Make sure the dock adaptor is compatible to your iPod.
Connecting Auxiliary Equipment (AUX INPUT)
Connect the AUX INPUT sockets on this unit to the line output sockets on the auxiliary equipment
as illustrated below.
Connecting Auxiliary Equipment (LINE OUT)
Connect the LINE OUT sockets on this unit to the auxiliary input sockets on the auxiliary
equipment as illustrated below.
Connecting the Headphones
Connect a pair of headphones to the phones jack. No sound comes out of the speakers.
Note: Be sure to turn down the volume before connecting or putting on headphones.
Caution: Excessive sound pressure from earphones and headphones can cause hearing loss.
Auxiliary equipment
Auxiliary equipment
The CD Player
The CD Player
The CD Player
iPod Portable Player
iPod Docking
Docking Cable
- 10 -
Connecting the AC Power Plug
Insert the AC power plug into a wall outlet, and your system is ready to use.
Caution: Be sure to unplug the power plug from the outlet when going out or when the system is
not in use for an extended period of time.
Turning the Power On and Off
Turning the System On
Press the Standby button ( ) to turn the system on from standby mode. The display comes on.
Caution: When turning the system on, the system comes on ready to continue in the mode it was
in when last turned off.
Turning the System Off
Press the Standby button ( ) again to turn the system off (called Standby Mode). The clock will be
displayed.
Switching the System to Eco Power Standby Mode
If the system is in Normal Standby Mode with clock display. Press and hold the Standby button ( )
for 3 seconds or longer to switch to Eco Power Standby Mode. The Eco Power LED light will be on.
Then press the Standby button ( ) again or press the Clock button (CLOCK) to switch to Normal
Standby Mode. The clock will be displayed and the Eco Power LED light will be off.
Caution: Be sure to unplug the system from the wall output when the system is not in use for an
extended period of time.
Setting the Clock
Setting the Clock Manually
1. Set the unit to normal standby mode.
2. Press the Clock button (CLOCK), the hour indicator will blink.
3. Set the hour with the Volume Down button (VOL-) or Volume Up button (VOL+).
4. Press the Clock button (CLOCK), the minute indicator will blink.
5. Set the minute with the Volume Down button (VOL-) or Volume Up button (VOL+).
6. Press the Clock button (CLOCK), 12H or 24H will blink.
7. Set the clock to either 12 or 24 hour format with either of the Volume Down button (VOL-) or
Volume Up button (VOL+).
8. Press the Clock button (CLOCK), the built-in clock starts operating.
Please note:
• The clock must be set in standby mode and if the set-up time for each step is longer than 3
seconds, set-up will be cancelled.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.
Setting the Clock Automatically
Tune into either a DAB or RDS station and wait for a few minutes. To confirm, press the Clock
button (CLOCK).
- 11 -
Sound Quality
Adjusting the Volume
To increase or decrease the volume, rotate the Volume Control knob (- VOLUME CONTROL +) on the
amplifier or press the Volume Up/Down buttons (VOL +/-) on the remote control.
For private listening, you can connect headphones to the headphone jack, and no sound will come
out from the speakers.
Note: Be sure to turn down the volume before connecting or putting on headphones. Do not listen
to headphones at high volume, as such use can permanently damage your hearing.
Warning: The default volume setting is at 12.
Adjusting the super bass
You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the Super Bass button (S-BASS) on the remote control to get the effect, the word
“S-BASS” will display on the Vacuum Fluorescent Display (VFD). Press the Super Bass button
(S-BASS) again to cancel the effect.
Control the Loudness
This unit has loudness function, which can automatically increase the bass sound effect at low
volume. It can also increase the bass sound effect at high volume, but it will be relatively less
when it is at high volume. Press the Loudness button (LOUDNESS) on the remote control to obtain
the loudness function, the word “LOUD” will display on the Vacuum Fluorescent Display (VFD).
Preset Equalizer
You can adjust the sound reproduced simply by choosing from 5 preset equalizers. Press the
Preset Equalizer button (P-EQ) repeatedly to scroll through the following options:
Changing the Vacuum Fluorescent Display (VFD) Darkness
This unit has three brightness levels for you to adjust the clock display. You only need to press the
Vacuum Fluorescent Display (VFD) Dimmer Control button (DIM) on the remote control, then you can
choose the proper lighting to use this system at different times.
Listening to Radio Broadcasts
DAB Radio
Tuning to DAB for the first time
* Press the Function button (FUNCTION) repeatedly on the front panel of the amplifier or the Tuner
button (TUNER) on the remote control to select the DAB station.
* The system will start to a quick scan to search for all available Band lll channels automatically.
* If no DAB service is available “NO SIGNAL” will be displayed.
* If there are available DAB services, the system will store all detected stations.
* At completion of the scanning, the system will tune to a station on the list.
Tuning to a station
1. Press the Reverse/ Fast Forward buttons (D/C) to select the desired station from the list.
2. Press the Play/Pause button (BF) to confirm.
POPS JAZZ CLASSIC ROCK FLAT
- 12 -
Re-tuning
By re-tuning, you can update your DAB ensemble list all over again. At the completion of scanning,
the system will tune to the first service of the first ensemble in the updated ensemble list.
* Press and hold the Scan button (INTRO/SCAN) for 2 seconds or more, the system will start full
scan to search for all available Band lll channels again automatically.
* Press the Scan button (INTRO/SCAN) briefly, the system will start a quick scan process to search
for Band lll channels again automatically.
Manual Tuning
1. Press and hold the Play/Pause button (
BF) for more than 2 seconds to enter the manual tuning
mode.
2. Press the Reverse/ Fast Forward buttons (
D/C) to select your desired DAB channels
backward/forward.
3. Press the Play/Pause button (BF) to confirm and tune to your selected channel.
Programming DAB Stations
You can save up to 20 DAB stations in the system memory.
1. Press the Reverse/ Fast Forward button (D/C) to select your desired DAB channels.
2. Press the Play/Pause button (BF) to confirm, and tune to your selected channel.
3. Press the Program button (PROG) and then press the Previous/ Next buttons (H/G) to select
a location for storing your desired station. You can also use the Number buttons (0-9) to input a
number directly and tune to the service associated with this number. If the number is larger than
10, press the Number button (10+) once or more to select the first digit you want and then use
the Number buttons (0-9) to input the second digit.
4. Press the Program button (PROG) again for confirmation until “P # SAVED”(# indicating the preset
number your selected) display.
Tuning to Preset DAB Stations
* Press the Previous/ Next buttons (H/G) until the desired preset station is displayed. The
system will tune to the selected station automatically.
* You can also use the Number buttons (0-9) to input a number directly and tune to the service
associated with this number.
* To input a number larger than 10, press the Number button (10+) once or more to select the first
digit you want and then use the Number buttons (0-9) to input the second digit.
DAB Information Display
You can view the DAB service information in the following modes. Depending on the DAB radio
station you are tuning to, some information modes may be unavailable. Press the Display button
(DISPLAY) repeatedly to view the following information.
DLS (Dynamic Lable Segment)
Signal Strength
PTY (Program Type)
Data Rate and Mode
Ensemble Name
Date and Clock
- 13 -
Resetting the system
1. In the DAB mode, press and hold the Display button (DISPLAY) until “SYS RESET” appears on the
Vacuum Fluorescent Display (VFD).
2. Press the Play/Pause button (BF) to confirm. The system will clear its internal memory and
automatically start a quick scan all over again.
Note: If no DAB signal is found, it may be necessary for you to relocate your radio. Alternatively,
please visit http://www.ukdigitalradio.com/coverage to check whether the DAB cover
age is available in your area.
FM Radio
You can listen to FM stations. Stations can be tuned in manually, automatically, or from preset
memory storage.
Caution: Before listening to the radio, please check that the FM antenna is correctly connected and
adjusted for length and direction.
Tuning in a Station
1. Repeatedly press the Function button (FUNCTION) on the front of the amplifier until FM Radio is
displayed on the display screen, or press the Tuner Function button ( ) on the remote control.
2. Tune in a station using one of the following methods.
Auto Tuning
If you press the Intro/Scan button (INTRO/SCAN) button on the remote control, display will show
“AUTOSCAN” and the auto tuning would start.
Manual Tuning
Repeatedly press the Tuning Backward/Forward buttons (- TUNING +) on the top of the CD player
or press the
DD
DD
D/
CC
CC
C buttons on the remote control to change the frequency until you find the
station you want.
Preset Tuning (Available only after the stations are preset)
Repeatedly press the Preset Up/Down switch buttons (- PRESET +) on the top of the CD player or
press the
HH
HH
H/
GG
GG
G buttons on the remote control to select the desired preset number. Its band
and frequency are displayed on the Vacuum Fluorescent Display (VFD).
Presetting Stations
You can manually preset up to 20 FM stations.
Tune in the desired station:
1. Press the Program button (PROG) on the remote control, the preset number will be displayed.
2. Press the Preset Up/ Down switch buttons (- PRESET +) on the top of the CD player or the
HH
HH
H/
GG
GG
G buttons on the remote control to select the preset number.
- PRESET/
HH
HH
H Decrease the preset number by 1
PRESET +/
GG
GG
G Increase the preset number by 1
Note: If you select more than 20, the preset number will be changed to “1” automatically.
3. Press the Program button (PROG) again to store the station. The display will return to the
broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
Note: If the system is unplugged or if a power failure occurs, the preset stations will not be erased
after stored.
To change the FM Reception Mode
Press the Mode button (MODE) to select the Auto or Mono channel to receive the best FM reception
mode.
- 14 -
RDS (Radio Data System) Reception
Many FM stations are broadcasting added data compatible with RDS. This radio set offers
convenient functions using such data.
Press the Display button (DISPLAY) on the remote control repeatedly to select the information that
displayed as follows.
PRG TYPE
Program type identification signal. (Example: News, Rock, Classical music.)
RADIO TEXT
This displays the news of stations.
DATE/CLOCK
This displays the current date and time, which is supplied by the radio station and should always
be accurate.
CD Operation
CD Playing
1. Repeatedly press the Function button (FUNCTION) on the front of the amplifier or press the Disc
Function button ( ) on the remote control.
2. Press the Open/Close button (K) to open the disc door and place the disc on the disc tray (with
the printed side up).
3. Press the Open/Close button (K) to close the disc door, the unit will read the disc and play it
automatically.
Note: If in stop mode, please press the Play/Pause button (BF) to start playing the disc.
4. Press the Play/Pause button (BF) to pause the playing, press the button again to continue play.
5. Press the Stop button (L) to stop the disc playing.
Direct Select track
Load a disc, upon finishing reading the disc, you can select tracks by using number buttons (0-9,
10+) on the remote control and play.
If the song number is less than 10, press the number buttons 0-9.
If the song number is over 10, press the Number button (10+) and press the one of the number
buttons 0-9. Each press of 10+ increases the tens by 1 eg 10, 20, 30, so for track ‘22’ press ‘10+’
twice then ‘2’.
To Skip Search and Play
Press the Previous button (H) once or more to skip previous one or more tracks of the disc.
Press the Next button (G) once or more to skip forward one or more tracks of the disc.
To Search
Press and hold the Reverse button (D) or Fast Forward button (C) to search for the position that
you intend to start playing.
Text Display During Playback
Press the Display button (DISPLAY) to show the current track number and remaining playback time.
- 15 -
Program Play
1. Insert a disc and press the (STOP) when it starts playing.
2. Press the Program button (PROG), “01-P-01” appears.
3. Press the Number buttons (0-9, +10) or the H/G buttons on the remote control to select the
desired track number.
4. Press the Program button (PROG) to confirm the track number to be stored.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press the Play/Pause button (BF) to start programme play.
7. Press the Stop button (L) once to stop the programme play. Press the Stop button (L) twice to
clear program.
Note: Random play will not shuffle the programmed music list.
Random Play (CD and MP3 discs)
You can have the CD played in a random order.
Random play begins by pressing the Random button (RANDOM) on the remote control.
Playing the Beginning (Intro) of each Track
Press the Intro/Scan button (INTRO/SCAN) on the remote control to play the beginning of each track
consecutively. The playing time of each track is 10 seconds. When you hear the desired track,
press Play/Pause (BF) button twice.
Playing Repeatedly
ONE and ALL Repeat Play can be set by pressing the Mode button (MODE).
First press : To repeat playing same track , the word “REP” will blink.
Second press : To repeat playing all tracks on a disc, the word “REP” do not blink.
Third press : To cancel the repeat playing, the word “REP” disappears.
You can use this function to repeat playing certain part of a track.
When it is playing, press the repeat A-B button (A-B) on the remote control at the beginning of the
content that needs repeat playing. Press the repeat A-B button (A-B) again at the end of the
content that needs repeat playing. The player will then repeatedly play between A and B until you
press the repeat A-B button (A-B) again to cancel this function. The unit will then turn to normal
playing mode.
Note: A-B repeat function can only be used within the same track.
MP3 Disc Playing
When selecting tracks the player will automatically display the directory and track number. For
example: track number 21 may be from directory 3, track 7.
1. Repeatedly press the Function button (FUNCTION) on the front of the amplifier until MP3 displays
on the display screen, or press the Disc Function button ( ) on the remote control.
2. Press the Open/Close button (K) to open the disc door and place the MP3 disc on the disc tray.
3. Press the Display button (DISPLAY) on the remote control, ID3 information (song title and artist)
will be displayed or “NO ID3” if there is no ID3 information. Press this button again, and the
directory, track and playing time will be displayed.
4. When playing MP3 discs, the current album and track will be displayed.
5. Press the H, G buttons to select the previous/next track. When pressing the D, C
buttons for a few seconds, it will search backward or search forward.
- 16 -
6. Press the Album Up button (ALB+) or Album Down button (ALB-) on the remote control to select
the next/previous directory, and play the first track of this directory.
If the playing is stopped, press the Album Up button (ALB+) or Album Down button (ALB-) on the
remote control to select the next/previous directory.
Then choose the track with the Next button (G) or Previous button (H).
7. Press the Play/Pause button (BF) to start play the disc.
8. Press the Stop button (L) to stop playing.
Note: Play will continue to the final track when the selected tracks have been played.
The first 2 digits of the display is the directory number, the next 3 digits is the track number
and the remaining digits display the minutes and seconds.
Playing Repeatedly
ONE, DIR and ALL repeat play can be set by pressing the Mode button (MODE).
First press : To repeat the same track, the words “TRK REP” blink.
Second press : To repeat ALB (Album), the words “ALB REP” blink.
Third press : To repeat ALL (All directories and tracks), the words “ALB TRK REP” do not blink.
Fourth press : To cancel the repeat playing, the word “REP” disappears.
You can use this function to repeat playing certain part of a track.
When it is playing, press the repeat A-B button (A-B) on the remote control at the beginning of the
content that needs repeat playing. Press the repeat A-B button (A-B) again at the end of the
content that needs repeat playing. Then the player will repeatedly play between A and B until you
press the repeat A-B button (A-B) again to cancel the this function. The unit will then turn to normal
playing mode.
Note: A-B repeat function can only be used within the same track.
Use the USB
By connecting an USB mass storage device (including USB flash memory, USB flash players or
memory cards) to this unit, you can enjoy the device's stored music through the powerful speakers
of Hi-Fi system.
1. Insert the USB device's USB plug into the socket on the rear of unit.
2. Press the USB button on remote control or press the Function button (FUNCTION) on the panel of
the amplifier to select the USB function.
3. The device's stored music will be played automatically.
4. When you store more one folders in the USB flash, use the Album Up button (ALB+) or Album
Down button (ALB-) on the remote control to select the next/previous folder. Then choose the
track with the Next button (G) or Previous button (H) to play the folder.
For the devices with USB cables:
1. Insert one plug of the USB cable (not supplied) to the socket on the set.
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For the memory card:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the socket on the set.
USB Storage Device Data Protection
Always insert the USB device in the correct direction. Failure to do so may result in damage
to the USB device and this product.
- 17 -
Do not remove the USB device while it is being accessed.
Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against corruption,
data loss or device malfunction. Please note that our company shall not accept any liability for
damage or loss of stored data.
Note: USB connection is not compatible with all hard drive models.
Use the iPod portable player
Correctly dock your iPod portable player in the docking. Make sure the dock adaptor is compatible.
Press the iPod button (iPod/AUX) on the remote control or the Function button (FUNCTION) on the
panel of the amplifier to select iPod source.
Playback starts automatically. You can select available features (e.g. BF,G,H etc.)
during playback.
In power on mode, directly dock your iPod portable player in the docking for charging.
Note: For the purpose of saving power, recharging of your iPod or USB device is NOT SUPPORTED
when the main set is in the STANDBY MODE.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes when it is playing. By
setting the sleep timer, you can fall asleep to music and know that your system will turn off by itself
rather than play all night.
1. Play a CD or tune in to the desired station.
2. To set the sleep timer press the Sleep button (SLEEP) on the remote control repeatedly, it
changes the number of minutes shown on the display in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as
before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When the Sleep button (SLEEP) on the remote control is pressed once, the remaining sleep time is
displayed. Wait for a second until the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the Sleep button (SLEEP) on the remote control until the “00” is displayed.
Turning off the system can also cancels the sleep timer.
- -
10 20
...
80 90 00
- 18 -
Setting the Daily on Timer
You can use the setting timer to make the unit automatically turn on at a certain time everyday from
standby. When the setting timer is on, the timer indicator “ ” will be displayed. But the clock must be
correctly set for the timer to operate correctly.
1. In standby mode, press the Timer button (
TIMER) on the remote control, the hour indicator will
blink.
2. Set the hour with the Volume Down button (
VOL-) or Volume Up button (VOL+).
3. Press the Timer button (TIMER) on the remote control, the minute indicator will blink.
4. Set the minute with the Volume Down button (VOL-) or Volume Up button (VOL+).
5. Press the Timer button (
TIMER) on the remote control, the selected time is set. Press the same
button again, the “OFF” indicator will blink. Then set the daily timer to “ON” (daily timer set is in
effect) or “OFF” (daily timer set is to cancel) by pressing the Volume Down button (
VOL-) or
Volume Up button (VOL+).
Caution:
* You can set the daily timer only in standby mode.
* The operating time of every step shouldn’t be longer than 3 seconds or it will return to time
display.
* The sound source on the automatic on mode is the same as the sound source the last time, the
unit was turned off by the standby switch.
* The volume automatically comes on at level 12.
To confirm the daily time
When you press the Timer button (TIMER) on the remote control in standby mode, the daily time is
displayed. Wait for a few seconds until the display returns to the time display.
To cancel the daily timer setting
Repeat the previous steps for setting the daily timer until “OFF” is displayed.
Turning off the system also cancels the daily timer.
- 19 -
Disc Handling
Handling Precautions
• Hold the disc by the edges so the surface will not be soiled with fingerprints. (A)
Fingerprints, dirt and scratches can cause skipping and distortion.
• Do not write on the label side with a ball-point pen or other writing implements.
• Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any
other solvent.
• Be careful not to drop or bend the disc.
• Do not install more than 1 disc on the disc tray.
• Do not try to close the disc tray when the disc is not installed properly.
• Be sure to store the disc in its exclusive case when not in use.
If the surface is soiled (B)
• Wipe gently with a soft, damp (water only) cloth.
• When wiping discs, always move the cloth from the center hole toward the outer edge.
(If you wipe the discs using a circular motion, circular scratches are likely to occur, which will
cause noise.)
• If the disc is brought from a cold to a warm environment, moisture may form on the disc. Wipe
the moisture off with a soft, dry, lint-free cloth before using the disc.
Improper disc storage
You can damage discs if you store them in the following places:
• Areas exposed to direct sunlight.
• Humid or dusty areas.
• Areas directly exposed to a heat outlet or heating appliance.
The disc formats can play in this unit:
Audio CD, CD-R, CD-RW.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/