Tripp Lite S3MT-100K480V Owner's manual

Brand: Tripp Lite

Model: S3MT-100K480V

Category: Uninterruptible power supplies (UPSs)

Type: Owner's manual

This manual is also suitable for

Owner’s Manual

S3MT-Series 3-Phase

Input Transformers:

480V-208V and 600V-208V

Models:

S3MT-60K480V, S3MT-100K480V, S3MT-60K600V, S3MT-100K600V

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Español 21 • Français 41

1. Introduction ................................................................................. 3

2. Important Safety Warnings .......................................................... 5

3. Installation .................................................................................. 6

3.1 Mechanical Data ...................................................................................6

3.2 Package Inspection ..............................................................................7

3.3 Unpacking the UPS ...............................................................................7

3.4 Package Contents .................................................................................9

3.5 Cabinet Overview ................................................................................10

3.6 Power Cables ......................................................................................12

3.7 Transformer-to-UPS Connection Line Diagram ...................................13

3.8 Multiple Transformer Connections ...................................................... 15

3.8.1 S3MT-60K480V/S3MT-60K600V to S3M50K or S3M60K UPS ........................ 15

3.8.2 S3MT-100K480V/S3MT-100K600V to S3M80K or S3M100K UPS .................. 15

4. Operations ................................................................................. 16

4.1 Over-Temperature Protection ..............................................................16

4.1.1 Over-Temperature Red Warning LED Light ................................................... 16

4.1.2 Over-Temperature Protection Relay and Thermal Switch ............................. 16

5. Speciﬁcations ............................................................................ 17

6. Storage ...................................................................................... 19

7. Warranty and Regulatory Compliance ........................................ 19

Table of Contents

1. Introduction

Tripp Lite’s S3MT-60K480V and S3MT-100K480V input isolation transformers provide 480V (Delta) to 208V (Wye) step-

down and Isolation protection to the connected UPS and its load. The S3MT-60K600V and S3MT-100K600V Input isolation

transformers provide 600V (Delta) to 208V (Wye) step-down and isolation protection to the connected UPS and its load.

The transformer has input isolation to mitigate utility line surges and spikes, while protecting the UPS. The transformer

includes a built in breaker at the transformer output side for protection. The ball-bearing fans maintain quiet operation (four

fans for 60K models, three large fans for 100K models). An overheat-sensing relay and switch combine with a warning light

to provide over-temperature warning and overheating protection. The UPS system’s small footprint and quiet acoustic proﬁle

enable installations with minimal space and noise impact. All transformer models feature rugged stainless steel housings with

front panels similar to the S3M-Series 208V 3-Phase UPS line.

UPS Model Series Number Capacity Description

S3MT-60K480V AG-050D 60kW 480V to 208V Input Isolation Transformer

S3MT-100K480V AG-0510 100kW 480V to 208V Input Isolation Transformer

S3MT-60K600V AG-050F 60kW 600V to 208V Input Isolation Transformer

S3MT-100K600V AG-050E 100kW 600V to 208V Input Isolation Transformer

Typical applications

4-Wire (3Ph+N+PE) IT equipment loads in government, manufacturing, hospitals, industrial settings and corporate settings

that have 480V or 600V electrical mains and 208V/120V or 220V/127V IT Loads.

Key Features

• Isolation protection to the UPS input, with stepped-down input from 480V (Delta) to 208V/120V (Wye) or 600V (Delta) to

208V/120V (Wye)

• Circuit breaker and overheating protection

• 96.5% to 97.5% efﬁciency

• Wide input voltage and frequency operating range:

Voltage: -20% to +25% @ 100% load and 40-70 Hz

• Insulation class: 180°C material

• Reliability-tested according to ISTA-3B for vibration, shock, drop (tip test)

• UL and CSA TUV certiﬁcations

• Rugged stainless steel housing shipped ready for installation

• 2-year warranty

1. Introduction

Typical Conﬁgurations

These 480V Input Transformers may be purchased separately or as part of kit model with a Tripp Lite S3M Series 3-Phase UPS:

Input

Transformer Models

Maximum

Constant Load

Compatible with

208V 3Ph UPS

Kit Models: UPS + Transformer

Kit Models Kit Models Include

480V

S3MT-60K480V 60kW 50-60kW UPS

S3M50K-60K4T

S3M50K UPS +

S3MT-60K480V

S3M60K-60K4T

S3M60K UPS +

S3MT-60K480V

S3MT-100K480V 100kW 80-100kW UPS

S3M80K-100K4T

S3M80K UPS +

S3MT-100K480V

S3M100K-100K4T

S3M100K UPS +

S3MT-100K480V

600V

S3MT-60K600V 60kW 50-60kW UPS

S3M50K-60K6T

S3M50K UPS +

S3MT-60K600V

S3M60K-60K6T

S3M60K UPS +

S3MT-60K600V

S3MT-100K600V 100kW 80-100kW UPS

S3M80K-100K6T

S3M80K UPS +

S3MT-100K600V

S3M100K-100K6T

S3M100K UPS +

S3MT-100K600V

480V,

600V,

208V/120V,

(Wye)

UPS

WYE-

Load

208/120V

220/127V

WYE-

Load

208/120V

220/127V

208V/120V,

(Wye)

CAUTION! Risk of electrical shock! Hazardous live parts inside this unit are energized from the transformer even when

the breaker is turned off.

WARNING! The unit intended for installation in a controlled environment.

CAUTION! A transformer can present a risk of electric shock and high short circuit current. The following precaution should

be observed when working on the transformer:

• Remove watches, rings or other metal objects.

• Use tools with insulated handles.

To reduce the risk of electric shock, disconnect the transformer and UPS from the mains supply before performing

maintenance or service.

Servicing of the 3-phase transformer and UPS should be performed by Tripp Lite certiﬁed personnel with knowledge of the

3-phase transformer and UPS and all required precautions.

The transformer is extremely heavy. Caution should be taken in moving and positioning equipment. The instructions contained

within this manual are important and should be closely followed at all times during installation and follow-up maintenance of

the 3-phase transformer and UPS.

CAUTION!

The transformer has a dangerous level of heat. If the transformer’s front-panel red LED indicator is on,

the unit’s outlets may have a dangerous level of heat.

All servicing on this equipment must be carried out by Tripp Lite-certiﬁed service personnel.

Before conducting any maintenance, repair or shipment, ﬁrst ensure everything is turned off completely

and disconnected.

Special Symbols – The following symbols are used on the transformer to warn you of precautions:

RISK OF ELECTRIC SHOCK - Observe the warning that a risk of electric shock is present.

CAUTION - REFER TO THE OWNER’S MANUAL for information regarding important operating and

maintenance instructions.

SAFE GROUNDING TERMINAL - Indicates THE primary safe ground.

2. Important Safety Warnings

SAVE THESE INSTRUCTIONS

This manual contains important instructions for models S3MT-60K480V / S3MT-100K480V / S3MT-60K600V /

S3MT-100K600V that should be followed during installation and maintenance of the transformer and UPS.

3. Installation

3.1 Mechanical Data

Physical Requirements

Leave space around the cabinet for operation and ventilation (Figure 3-1):

1. Leave at least 23.6 in. (600 mm) space in the front for ventilation

2. Leave at least 20 in. (500 mm) space at the right and left for operation

3. Leave at least 20 in. (500 mm) space at the back for ventilation

Figure 3-1

23.6”

(600 mm)

47.2”

(1200 mm)

33.5”

(850 mm)

≥20”

(500 mm)

≥20”

(500 mm)

≥20”

(500 mm)

≥20”

(500 mm)

≥23.6”

(600 mm)

3. Installation

3.2 Package Inspection

1. Don’t lean the transformer cabinet when removing it from the packaging.

2. Check the appearance to see if the transformer cabinet was damaged during transport. Do not power on the transformer

cabinet if any damage is found. Contact the dealer immediately.

3. Check the accessories against the packing list and contact the dealer in case of missing parts.

3.3 Unpacking the UPS

1. Hold the sliding plate steady. Cut and remove the binding

straps (Figure 3-2).

Figure 3-2

2. Remove the plastic bag and the outer carton (Figure 3-3).

Figure 3-3

3. Installation

3. Remove the foam packing material and the beveled pallet

(Figure 3-4).

Figure 3-4

4. Remove the screws securing the cabinet to the pallet

(Figure 3-5).

Figure 3-5

5. Lift the cabinet with a forklift and remove the packing pallets (Figure 3-6).

Figure 3-6

3. Installation

3.4 Package Contents

Contents TL P/N S3MT-60K480V S3MT-60K600V S3MT-100K480V S3MT-100K600V

Input Transformer 1 1 1 1

Owner’s Manual 933D05 1 1 1 1

Bottom Skirts 103922A 2 2 2 2

Bottom Skirts 103923A 2 2 2 2

Screws for Skirts 3011C3 24 24 24 24

3. Installation

3.5 Cabinet Overview

Over-Temperature Alarm LED

Cooling Fans

Breaker with Trip

Cabling Terminals

Bottom Entry Knockouts

(for Power Cable Entry and Exit)

Rear View,

S3MT-60K480V / S3MT-60K600V

Rear View,

S3MT-100K480V / S3MT-100V600V

Front View

2 2

Front View (Terminal Block without Cover), S3MT-60K480V / S3MT-60K600V

3. Installation

Front View (Terminal Block without Cover), S3MT-100K480V / S3MT-100K600V

3. Installation

3.6 Power Cables

The cable design shall comply with the voltages and currents provided in this section, and in accordance with local electrical codes.

WARNING!

UPON STARTUP, ENSURE YOU ARE AWARE OF THE LOCATION AND OPERATION OF THE EXTERNAL

ISOLATORS CONNECTED TO THE UPS INPUT/BYPASS SUPPLY OF THE UTILITY DISTRIBUTION PANEL.

ENSURE THESE SUPPLIES ARE ELECTRICALLY ISOLATED AND POST ANY NECESSARY WARNING SIGNS TO

PREVENT INADVERTENT OPERATION.

Cable Sizes

UPS Model

Cable Sizes (THHW wiring at 75°C)

AC Input AC Output Neutral Grounding Lug

Gauge Torque Gauge Torque Gauge Torque Gauge Torque

S3MT-

60K480V

50mm

Max.

50mm

25N•m

50mm

Max.

50mm

25N•m

70mm

Max.

70mm

25N•m

50mm

Max.

50mm

25N•m M8

S3MT-

60K600V

35mm

Max.

50mm

25N•m

50mm

Max.

50mm

25N•m

70mm

Max.

70mm

25N•m

50mm

Max.

50mm

25N•m M8

S3MT-

100K480V

70mm

Max.

120mm

50N•m

70mm

Max.

95mm

50N•m

120mm

Max.

120mm

50N•m

95mm

Max.

120mm

50N•m M10

S3MT-

100K600V

50mm

Max.

70mm

50N•m

70mm

Max.

95mm

50N•m

120mm

Max.

120mm

50N•m

95mm

Max.

120mm

50N•m M10

3.7 Transformer-to-UPS Connection Line Diagram

Connections are shown below for the cabinet with built-in input isolator transformer, breakers and the red over-temperature LED.

Figure 3-7: Connection Line Diagram for S3MT-60K480V / S3MT-100K480V

3. Installation

Input Transformer

Red LED (Lit = Over-Temperature, Off = Normal)

Output 208/120V AC,

3-Phase, 4-Wire +

Ground to the UPS Input

Output 208/120V,

220/127V,

3-Phase, 4-Wire +

Ground to Load

Maintenance Breaker

Bypass Breaker

Mains Breaker

Battery input: +/–120V DC

Output Breaker

PFC STSInverter

Charger

Delta In 480V/208V Wye

Transformer Cabinet

UPS

Breaker

3PH

Trip

AC Input 480V AC

3. Installation

Figure 3-8: Connection Line Diagram for S3MT-60K600V/ S3MT-100K600V

Input Transformer

Red LED (Lit = Over-Temperature, Off = Normal)

Maintenance Breaker

Bypass Breaker

Mains Breaker

Battery input: +/–120V DC

Output Breaker

PFC STSInverter

Charger

Delta In 600V/208V Wye

Transformer Cabinet

UPS

Breaker

3PH

Trip

AC Input 600V AC

Output 208/120V AC,

3-Phase, 4-Wire +

Ground to the UPS Input

Output 208/120V,

220/127V,

3-Phase, 4-Wire +

Ground to Load

3.8 Multiple Transformer Connections

3.8.1 Connections for S3MT-60K480V/S3MT-60K600V to S3M50K or S3M60K UPS

Transfomer input is Delta 3-Wire (3Ph + Ground) And transformer output is Wye 4-Wire (3Ph + N + Ground).

Figure 3-8: UPS (Rear View) Transformer Cabinet (Front View)

3.8.2 Connections for S3MT-100K480V/S3MT-100K600V to S3M80K or S3M100K UPS

Transfomer input is Delta 3-Wire (3Ph + Ground) And transformer output is Wye 4-Wire (3Ph + N + Ground).

Figure 3-9: UPS (Rear View) Transformer Cabinet (Front View)

3. Installation

WARNING: The transformer output neutral is not bonded to chassis ground. Please provide a means

to connect the transformer chassis ground to the transformer output neutral.

Note: The transformer chassis ground must be connected to earth ground.

IMPORTANT: You may view and/or download this manual from the tripplite.com website to view the

cable connections in colors.

4. Operation

4.1 Over-Temperature Protection

4.1.1 Over-Temperature Red Warning LED Light

The transformer includes a warning LED light on the top portion of the front panel. The light turns ON when the transformer

reaches a temperature of 160°C ±5°C, i.e. a range of 155°C to 165°C (311°F to 329°F). The light turns OFF when the

transformer cools to a temperature of 125°C ±5°C, i.e. a range of 120°C to 130°C (248°F to 266°F).

4.1.2 Over-Temperature Protection Relay and Thermal Switch

The transformer includes an over-temperature protection relay and thermal switch to protect the transformer from overheating.

At temperatures of 160°C ±5°C, i.e. a range of 155°C to 165°C (311°F to 329°F), an over-temperature protection relay and

thermal switch will activate and will open the output breaker of the transformer. Once the transformer temperature has cooled

down and the warning LED light has turned OFF, you may manually re-activate (close) the output breaker to restart normal

operation.

WARNING: It is not advised to connect two UPS in parallel when using individual transformers for

each UPS.

5. Speciﬁcations

Models S3MT-60K480V S3MT-60K600V S3MT-100K480V S3MT-100K600V

Description

3-Phase 60k

Input Isolation

Transformer, Delta

480V/208V Wye

3-Phase 60k

Input Isolation

Transformer, Delta

600V/208V Wye

3-Phase 100k

Input Isolation

Transformer, Delta

480V/208V Wye

3-Phase 100k

Input Isolation

Transformer, Delta

600V/208V Wye

Transformer Type Dry-Type

Input

Input Voltage 480V 600V 480V 600V

Input Voltage Operational Range and

De-Rating

-45%, +25% at 40 % Load

-20%, +25% at 100 % Load

Input Amps 101A 81A 168A 134A

Input Connections 3-Wire (L1, L2, L3, +PE)

Input Conﬁguration Delta

Input Connection Type Copper Bar

Rated AC Input Frequency 50/60 Hz

Frequency Range and Derating 40~70 Hz

Voltage Selection No

Voltage Drop: Ratio Ouput,

No Load to Full Load

≤ 3%

Inrush Current ≤900A (10 ms) ≤710A (10 ms) ≤3330A (10 ms) ≤1160A (10 ms)

Input Isolation Yes

Output

VA Rating 60kVA 60kVA 100kVA 100kVA

Transformer Output Voltage 208/120V, (3-Phase, 4-Wire)

Output Amps 225A 374A

Transformer Output Breaker Rating 250A 250A 400A 400A

Output Watts Detailed 60,000W 60,000W 100,000W 100,000W

Output Connections 4-Wire (L1, L2, L3, +PE, +N)

Output Connection Type Copper Bar

Output Conﬁguration Wye

Input Tranformer Output Isolation Yes

Operation

Over-Temperature Warning LED (Red)

Turns ON at 160°C ±5°C, i.e. a range of 155°C to 165°C ( 311°F to 329°F)

Turns OFF at 125°C ±5°C, i.e. a range of 120°C to 130°C (248°F to 266°F)

Over-Temperature Protection

Reset Device

Transformer output turns OFF at temperatures of 160°C ±5°C,

i.e. a range of 155°C to 165°C (311°F to 329°F).

The transformer output breaker can be turned ON manually when the

warning light turns OFF.

Insulation Class 180°C

Temperature Rise 125°C

Full Load Efﬁciency 96.50% 96.70%

5. Speciﬁcations

Models S3MT-60K480V S3MT-60K600V S3MT-100K480V S3MT-100K600V

Half Load Efﬁciency 97.50% 97.70%

Physical Info

Unit Height 47.2 in. (1200 mm)

Unit Width 23.6 in. (600 mm)

Unit Depth 33.5 in. (850 mm)

Unit Weight 789 lb. (358 kg) 789 lb. (358 kg) 1078 lb. (489 kg) 1049 lb. (476 kg)

Floor Loading 702 (kg/m²) 702 (kg/m²) 959 (kg/m²) 933 (kg/m²)

Unit Carton Height 55.4 in. (1407 mm)

Unit Carton Width 29.9 in. (760 mm)

Unit Carton Depth 38.8 in. (985 mm)

Unit Carton Weight 855 lb. (388 kg) 899 lb. (408 kg) 1202 lb. (545 kg) 1102 lb. (500 kg)

Tip-n-Tell Label Included on

Overpack Box

Yes

Environment

Audible Noise at 1 m 65 dB max.

RH Humidity, Non-Condensing 95%

Online Thermal Dissipation,

Full Load (BTU/hr)

7167 7167 11263 11263

Storage Temperature 5°F to 140°F (-15°C to 60°C)

Operating Temperature 32°F to 104°F (0°C to 40°C)

Operating Elevation <1000 m for nominal power (over 1000 m, the power de-rating is 1% per 100 m)

Mechanical

Transformer Windings Aluminum

Cabinet Material Cold Rolled Galvanized Steel (SGCC)

Cabinet Color RAL 9011

Fan (Type/Quantity)

60K Models: 4x Ball Bearing, 120 mm (576 total CFM)

100K Models: 3x Ball Bearing, 172 x 152 mm (723 total CFM)

Reliability

Vibration ISTA - 3B

Shock ISTA - 3B

Drop ISTA - 3B (Tip Test)

Agency Approvals

Approving Agency cTUVs

Agency Standard Tested UL 1778 5th Edition

Canadian Approvals CSA 22.2-107.3-14

CE Approvals N/A

EMI Approvals N/A

RoHS/REACH Yes

6. Storage

Before storing the isolation transformer, ensure all connections have been disconnected and all breakers are turned OFF.

Replace all input or output access covers to avoid damaging any contacts.

The transformer must be stored in a clean, secure environment with temperatures between 5°F to 140°F (-15°C to 60°C)

and relative humidity less than 90% (non-condensing).

Store the transformer in its original shipping container, if possible.

7. Warranty and Regulatory Compliance

Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period

of 2 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the

product, in its sole discretion. Service under this Warranty includes parts only. International customers should contact Tripp Lite support at

[email protected]. Continental USA customers should contact Tripp Lite Customer Service at 773-869-1234 or visit tripplite.com/support/help

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO

EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED

WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE;

AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied

warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not

apply to you. This Warranty gives you speciﬁc legal rights, and you may have other rights, which vary from jurisdiction to jurisdiction.)

Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since

individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or ﬁtness of these devices for

any speciﬁc application.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You will be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and

electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and illustrations may differ slightly from

actual products.

WARNING: The transformer(s) is/are very heavy. Before storing the transformer, make sure to take

into account the ﬂoor loading (kg/m²) requirements listed in section 5. Speciﬁcations under

“Physical Info” to store safely.