AREZZO BARN DOOR HARDWARE INSTALLATION
1Arezzo Barn Door Hardware Installation Instructions
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing door hardware. Signature
Hardware accepts no liability for any damage to the
hardware, door, walls, floor, or for personal injury during
installation.
Observe all local building codes.
Unpack and inspect the items for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all the required
materials that are needed for the installation.
All fasteners must be mounted securely into solid
wood studs, or wood blocking within the wall, for
proper support.
If drilling custom mounting holes into a non-drilled
track, be sure to use a ⅜” diameter titanium coated or
cobalt steel drill bit. Drill slowly and carefully. Holes
should be evenly spaced, and ensure that there is one
mounting hole within 4” of each end.
If your baseboard interferes with your barn door,
additional spacers or longer standoffs may be
necessary. Contact Customer Relations for further
assistance.
TOOLS AND MATERIALS:
Adjustable
Wrench
Phillips
Screwdriver
Drill
Tape Measure
Level
Pencil
Drill Bits
Hex Wrench
(Included)
SKU(s): 939906, 939918
AREZZO BARN DOOR HARDWARE INSTALLATION
60”/72”
2Arezzo Barn Door Hardware Installation Instructions
H
84”
H
M6x40 (x6)
60”/72”
16”
16” 16”
H + 1¾”
84”
16”
16”
16” 16”
H + 1¾”
Roller
x2
M8x90 (x4)
M6x40 (x6)
Roller
x2
M8x90 (x4)
Standoff
x4
Track x1
Jump Block
x2
Door Stop
x2
M8x60 (x4)
ST4.2x25 (x2)
M8x30 (x4)
Anchor x2
Door Guides (x1 ea)
Standoff
x5
Track x1
M8x60 (x5)
ST4.2x25 (x2)
M8x30 (x5)
Anchor x2
Jump Block
x2
Door Stop
x2
Door Guides (x1 ea)
SKU(s): 939906, 939918
AREZZO BARN DOOR HARDWARE INSTALLATION
3Arezzo Barn Door Hardware Installation Instructions
H = door height
30mm
ø8
Masonry Installation
1A.
2A.
H + 1¾”
roller
track
door guide
door stop
jump block
standoff (behind track)
Parts Diagram
16”
16”
16”
AREZZO BARN DOOR HARDWARE INSTALLATION
3.
4.
4Arezzo Barn Door Hardware Installation Instructions
3” 2”
ø4
30mm
H = door height
1B.
2B.
Drywall Installation
50mm
ø5.5
H + 1¾”
16”
16”
16”
5.
AREZZO BARN DOOR HARDWARE INSTALLATION
7.
8.
5Arezzo Barn Door Hardware Installation Instructions
1
2
6. Install the door guide. For a door that has been
notched on the bottom, use the concealed guide. For
a door with standard thickness, use the U-shaped
guide. For thicker doors, use the adjustable guide.
concealed
guide
adjustable
guide
u-shaped
guide
test once installation
is complete
/
