Dynamode USB-ALL-1, USB-ALL-INT Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Dynamode USB-ALL-1 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Media Card Readers
Internal & External USB Card Reader family
© 2006 Dynamode UK
Details correct at going to Press. E&OE
Part Number: NB-0019-MC-H
Further product details available from www.dynamode.co.u
k
52-in-1 Silver Internal Card Reader
USB-
A
LL-IN
T
-S
52-in-1 Beige Internal Card Reader
USB-
A
LL-IN
T
-B
Introduction
Dynamode now offer a complete range of high-speed USB2.0 Media
card readers for both System Builders and End Users alike.
Our USB-ALL-1 is a fully featured external Plug n Play 30-in-1 Card
reader that has a Read/Write speed of up to 480Mbps. Totally hot
swappable and certified Microsoft® Mass Storage compliant, the USB-
ALL-1 is perfect for mobile digital photography or other digital media
applications.
Complementing our Media Card range is our family of internal 52-in-1
USB2.0 Card readers. Perfect for System Builders and upgraders, the
USB-ALL-1-INT series has a standard 3.5” form factor for drive bay
insertion and reads all current Media Cards available in the market
today. Again with full wire speed read/writes, the USB-ALL-1-INT is
available in Black, Beige or Silver to match your existing system.
Features
High-speed USB2.0 Interface – 480Mbps Reads/Write times
Reads up to 52 Media Types: Internal USB Versions
Reads up to 30 Media Types: External USB Versions
Microsoft® Mass Storage compliant device
Hot swappable Media with Plug n’ Play
Read/Write Status LEDs with generous USB Cable (both types)
Reads CompactFlash I,II,III, Microdrive, XM, xD, SD, MS, MS Duo etc
Compatible with Windows® 98/ME/2000/XP, MAC OS 8.6 or above
Fixings, USB extension cables supplied as standard. Retail Box
USB-
A
LL-1
USB-
A
LL-IN
T
/