Standard Specifications
• Patented wash flow design allows for washed produce to be
automatically collected into the stainless steel unloading baskets.
• 4 bay wash tank. 2 and 3 bay systems available on separate
specification sheets.
• Custom models available. Full range of Power Soak customization
available including custom tabling, shelving, and accessories.
• Low profile wash jets average every three inches along the back
wall of wash tank above the wash tank intake. Average flow rate
per wash jet (regardless of tank length) is approximately 10 gpm,
providing free flowing uniform wash action.
• Stainless steel self draining pump housing and impeller, all wetted
parts of the pump assembly are stainless steel.
• Wash Tanks supported by 1-5/8” stainless diameter legs with 1 ¼”
stainless cross members and adjustable stainless steel bullet feet.
• Type 304 stainless steel construction throughout tanks, drain
boards, splashes and channel rims 14ga
• High quality ½” faucet assembly with pre-rinse spray
• Rear-exit stainless ball valve drain for 100% drainage
• Control – Pistol Grip ON/OFF mechanical Start/Stop switch
• ¾ HP heavy duty (TEFC) wash pump motors (high service factor)
are provided with all stainless steel pump assemblies
• Modular design allows quick and easy access to: motor, pump and
all major components
• Three years parts and three year labor warranty (USA only).
Application
The Produce Soak provides patented Free Flowing wash action,
reaching hard to reach areas on produce, washing both Raw
Agricultural Commodities (RAC) and/or Processed Produce being
consumed by the customer when used in conjunction with the proper
FDA & EPA approved free rinsing chemical.
Ideal for:
• Institutional Market
• Multi-Unit Food Service Operations
• QSR'S
• Retail Market
Electrical Service
Electrical Connection: PS-50 On/Off Control for 3/4HP Wash Pump
208/230V 1ph , 5.2/4.8 Amp
Optional Equipment Available
Stainless steel backsplash extensions
Additional unload baskets
Additional strainer for unload basket
Stainless steel chemical brackets and shelves
Notes:
* Machine construction compliant with NSF standard 2, insert and accessories approval
pending.
Patents Pending
33542 - 10/6/2010
50PSP84L4B1
SPECIFICATIONS
ITEM#
P
r
o
d
u
c
e
S
o
a
k
5
0
P
S
P
8
4
L
4
B
1
P
r
o
d
u
c
e
S
o
a
k
by Power Soak Systems, Inc.
903 E. 104th Street, Suite 130
Kansas City, MO 64131
www.producesoak.com
- Page 1 -
*
Elevation View:
Section View:
Plan Vew:
- PAGE 2 -
33542 - 10/6/2010
Patents Pending
38
47
PRODUCE DRYER
BY OTHERS
SEPARATE POWER SUPPLY REQUIRED
3/4" DIA. HOLES AND
3/4" STAINLESS TUBE
FOR CHEMICAL
ELECTRICAL CONNECTION
#PS-50 CONTROL, 1/2 INCH CONDUIT
208/230 60Hz/1ph, 5.2/4.8 AMPS (15 AMP SERV. REQD)
27
43.5
35.5
34
20
8
8.625
24.75
SINKS
12
19
7
REMOVABLE DIVIDERS FOR
PRODUCE WASHING BASKETS
1.5
2
99
9
36
DRAIN
84
18 30
30
5
4
36 WASH
1
0.75
/
