American Standard Townsend Champion 4 Round Front Height Toilet 3180.016 User manual

Type
User manual
K22
© 2008 AS America Inc.
TOWNSEND CHAMPION
®
4
ROUND FRONT RIGHT HEIGHT™ TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
19mm ± 6mm
(1 ± 1/4)
419mm
(16-1/2)
FINISHED
FLOOR
305mm
(12)
721mm
(28-3/8)
C/L OF OUTLET
83mm
(3-1/4)
216mm
(8-1/2)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
379mm
(14-7/8)
267mm
(10-1/2)
16mm
(5/8)
873mm
(34-3/8)
479mm
(18-7/8)
SUPPLY
AS
REQ'D
284mm
(11-3/16)
152mm
(6)
254mm
(10)
356mm
(14)
FINISHED WALL
FOOT ON
BOTTOM
OF BOWL
To Be Specied:
Color:
White Bone Silver Linen Black
Seat: (please specify color)
Champion
®
Slow Close Round Front #5330.010
Rise & Shine Round Front #5322.011
Laurel Round Front #5308.014
Supply with stop:
TOWNSEND CHAMPION
®
4 ROUND FRONT
RIGHT HEIGHT™ TOILET
2735.014
Vitreous china
EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion®4 Flushing System
performance platform
4" non-adjustable, piston action Accelerator
ush valve
16-1/2" rim height for accessible applications
Round Front siphon action jetted bowl
2-3/8" fully-glazed trapway
Speed Connect™ tank/bowl coupling system
Chrome-plated trip lever
Sanitary pier on bowl
100% factory ush tested
2 bolt caps
10 year warranty
3180.016 Round Front Right Height™ Bowl
4281.014 Tank
Nominal Dimensions:
721 x 479 x 873mm
(28-3/8" x 18-7/8" x 34-3/8")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability - July, 2003 revision
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 07/07
  • Page 1 1

American Standard Townsend Champion 4 Round Front Height Toilet 3180.016 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI