K22
© 2008 AS America Inc.
TOWNSEND CHAMPION
®
4
ROUND FRONT RIGHT HEIGHT™ TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
19mm ± 6mm
(1 ± 1/4)
419mm
(16-1/2)
FINISHED
FLOOR
305mm
(12)
721mm
(28-3/8)
C/L OF OUTLET
83mm
(3-1/4)
216mm
(8-1/2)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
379mm
(14-7/8)
267mm
(10-1/2)
16mm
(5/8)
873mm
(34-3/8)
479mm
(18-7/8)
SUPPLY
AS
REQ'D
284mm
(11-3/16)
152mm
(6)
254mm
(10)
356mm
(14)
FINISHED WALL
FOOT ON
BOTTOM
OF BOWL
To Be Specied:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat: (please specify color)
❏ Champion
®
Slow Close Round Front #5330.010
❏ Rise & Shine Round Front #5322.011
❏ Laurel Round Front #5308.014
❏ Supply with stop:
TOWNSEND CHAMPION
®
4 ROUND FRONT
RIGHT HEIGHT™ TOILET
❑ 2735.014
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion®4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelerator™
ush valve
• 16-1/2" rim height for accessible applications
• Round Front siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Chrome-plated trip lever
• Sanitary pier on bowl
• 100% factory ush tested
• 2 bolt caps
• 10 year warranty
❑ 3180.016 Round Front Right Height™ Bowl
❑ 4281.014 Tank
Nominal Dimensions:
721 x 479 x 873mm
(28-3/8" x 18-7/8" x 34-3/8")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability - July, 2003 revision
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 07/07