2. American Standard
  3. FitRight Elongated Toilet 2435.012

American Standard FitRight Elongated Toilet 2435.012 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard FitRight Elongated Toilet 2435.012 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3
© 2008 AS America Inc.
COLONY™ FitRight™
ELONGATED TOILET
VITREOUS CHINA

NN

NN

NN

NN

NN

NN

NNNN

NN

NN

NN

NN
'*/*4)&%
8"--
'*/*4)&%
'-003
$-0'4&"51045)0-&4
NN$&/5&34
$-0'065-&5
NN

NN

4611-:
"4
3&2h%
NN


NN

NN
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5324.09 “Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #53.02 “Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (2") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A2.9.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
COLONY™ FitRight™
ELONGATED TOILET
❑ 2435.012
• Vitreous china
• Low-consumption (6.0 Lpf/.6 gpf)
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• Pilot valve water control
• 2" Flapper ush valve
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 00% factory ush tested
❑ 3189.016 Bowl
❑ 4003.016 Tank
Nominal Dimensions:
724 x 457 x 727mm
(28-/2" x 8" x 28-5/8")
Fixture only, seat and supply by others
Alternate Tank Congurations Available:
❑ 4003.500 Tank complete with Aquaguard Liner
❑ 4003.800 Tank complete with trip lever located
on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimension
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
8/08
/