Fujitsu SCA.1 is a half pitch connector conformed to SCA system (80 pins). It has mating guide and ESD protection to ensure safety and reliability. The product is a hot-pluggable device, which means it can be plugged or unplugged without turning off the power. Ground contacts mate first before other contacts mate when engagement is done (conforms to SCA.2 specification). To prevent pin-bending, bellows contacts are used. The connector comes in 2 types: SMT plug that mates the center of a SMT plug to the center of a PCB and a plug that is 0.9 mm (0.035 in.) off-set from center.
Fujitsu SCA.1 is a half pitch connector conformed to SCA system (80 pins). It has mating guide and ESD protection to ensure safety and reliability. The product is a hot-pluggable device, which means it can be plugged or unplugged without turning off the power. Ground contacts mate first before other contacts mate when engagement is done (conforms to SCA.2 specification). To prevent pin-bending, bellows contacts are used. The connector comes in 2 types: SMT plug that mates the center of a SMT plug to the center of a PCB and a plug that is 0.9 mm (0.035 in.) off-set from center.
1
■ MATERIALS■ SPECIFICATIONS
■ FEATURES
• Half pitch connector conformed to SCA system (80
pins).
• Add mating guide and ESD protection to do plug-in
safety and reliability (They are newly added on SCA.
2CN).
• Hot-plugging. Ground contacts mate first before other
contacts mate when engagement is done (conforms to
SCA.2 specification).
• To prevent pin-bending, bellows contacts are used.
• Plug: 2 types are available.
1) The center of a SMT plug mates the center of a PCB.
2) 0.9 mm (0.035 in.) off-set from center
Specifications
–55°C to +105°C
DC 1 A
AC 240 V
40 mΩ max. (DC 6 V, 0.1 A)
1000 MΩ min. (DC 500 V)
AC 750 V for 1 minute
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstand voltage
)
Item
Insulator
Conductor
Plating
Materials
Polyester (UL94V-0)
Copper alloy
Contact
Terminal
Gold plating
Palladium plating
SCA.1, SCA. 2 INTERFACE CONNECTOR
240 SERIES (SCA)
240 Series (SCA.1)
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
PLUG, SMT (STRADDLE MOUNT)
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/BS
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0 (0.039)
4.0 (0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
49.53
±0.1
(1.950
±0.004
)
57.92
±0.05
(2.280
±0.001
)
3.50
±0.1
(0.137
±0.004
)
1.52
±0.1
(0.059
±0.004
)
3.70
±0.1
(0.145
±0.004
)
1.52
±0.05
(0.059
±0.001
)
3.70
(0.145)
1.27
±0.05
(0.050
±0.001
)
1.52
±0.05
(0.059
±0.001
)
24.765 (0.975)
0.76
±0.05
(0.029
±0.001
)
R
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
PLUG, SMT [0.9 mm (0.035 in.) OFFSET]
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/CS
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0 (0.039)
4.0 (0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
49.53
±0.1
(1.950
±0.004
)
57.92
±0.05
(2.280
±0.001
)
3.50
±0.1
(0.137
±0.004
)
1.52
±0.1
(0.059
±0.004
)
3.70
±0.1
(0.145
±0.004
)
1.52
±0.05
(0.059
±0.001
)
3.70
(0.145)
1.27
±0.05
(0.050
±0.001
)
1.52
±0.05
(0.059
±0.001
)
24.765 (0.975)
0.76
±0.05
(0.029
±0.001
)
R
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
240 Series (SCA.1)
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
SOCKET, VERTICAL MOUNT
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-244B080-G/AS
55.07 (2.168)
62.15 (2.446)
49.53 (1.950)
58.51 (2.031)
2.90
(0.114)
0.50
(0.019)
0.30
(0.011)
0.30
(0.011)
#40
#80
#41
#1
7.10
(0.279)
6.59
(0.255)
9.85
(0.387)
2.69
(0.105)
Hold on bar
Housing
59.51 (2.031)
1.905 (0.075)
0.952 (0.037)
2.20
±0.1
(0.086
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
0.80
±0.1
(0.031
±0.004
)
2.70
±0.1
(0.106
±0.004
)
#79
#80
#41
#1
#2
#39
#40
#42
Unit: mm (in.)
240 Series (GBIC)
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
PLUG, SMT (STRADDLE MOUNT), 20 PIN
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-248Q020-L/ES
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
#1
#11
#20
#10
27.38 (1.078)
23.03 (0.907)
19.77 (0.778)
11.43 (0.45)
1.27(0.05)
7.0 (0.276)
5.0 (0.197)
FT
110
20
1.27(0.05)
0.635(0.025)
1.27(0.05)
9.25(0.364)13.12(0.517)
26.24 (1.033)
Retention leg
R 0.635 (0.025)
1.0(0.004)
3.55(0.149)
6.72(0.264)
1.0(0.004)
R 1.60(0.629)
0.50 (0.019)
A
A
12.70(0.5)
1.52(0.060)
23.06 (0.908)
1.37
±0.05
(0.908
±0.002
)
1.27(0.05)
0.81±0.03
(0.032
±0.001
)
0.05 S W
2 PLC
0.81±0.03
(0.032
±0.001
)
0.05 S W
TYP
1.52(0.060)
TYP
2.33(0.092)
1.31(0.052)
TYP
1.52
(0.060) 0.05 S W
TYP
0.81±0.03
(0.032
±0.001
)
0.05 S W
TYP
4.22(0.166)
19.87
±0.2
(0.782
±0.008
)
3.19(0.126)
2.53(0.099)
3.50(0.138)
0.28(0.011)
2.60
±0.4
(0.102
±0.016
)
V
R 0.7
(0.028)
240 Series (SCA.2)
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
PLUG, SMT [0.9 mm (0.035 in.) OFFSET] SCA.2
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
61.67
±0.1
(2.427
±0.004
)
0.81
±0.05
(0.031
±0.001
)
0.81
±0.05
(0.031
±0.001
)
49.53
±0.1
(1.950
±0.004
)
58.17
±0.1
(2.290
±0.004
)
4.22
±0.05
(0.166
±0.001
)
1.27
±0.5
(0.050
±0.001
)
1.37
±0.5
(0.053
±0.001
)
3.50
±0.1
(0. 137
±0.004
)
1.52
±0.05
(0. 059
±0.001
)
1.52
±0.05
(0. 059
±0.001
)
3.00
±0.1
(0.118
±0.004
)
3.70
±0.5
(0.145
±0.001
)
1.52
±0.1
(0.059
±0.004
)
0.28
±0.1
(0.011
±0.004
)
R
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0
(0.039)
4.0
(0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
66.50 (2.618)
58.87 (2.278)
65.36 (2.573)
.93 (0.036)
3.65
(0.139)
6.72
(0.264)
■ PART NUMBER
FCN-248Q080-L/DS
PLUG, SMT (STRADDLE MOUNT) SCA.2
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/ES
6.72
(0.264)
3.65
(0.139)
.95
(0.039)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0
(0.039)
4.0
(0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
66.50 (2.618)
58.87 (2.278)
65.36 (2.573)
61.67
±0.1
(2.427
±0.004
)
0.81
±0.05
(0.031
±0.001
)
0.81
±0.05
(0.031
±0.001
)
49.53
±0.1
(1.950
±0.004
)
58.17
±0.1
(2.290
±0.004
)
4.22
±0.05
(0.166
±0.001
)
1.27
±0.5
(0.050
±0.001
)
1.37
±0.5
(0.053
±0.001
)
3.50
±0.1
(0. 137
±0.004
)
1.52
±0.05
(0. 059
±0.001
)
1.52
±0.05
(0. 059
±0.001
)
3.00
±0.1
(0.118
±0.004
)
3.70
±0.5
(0.145
±0.001
)
1.52
±0.1
(0.059
±0.004
)
0.28
±0.1
(0.011
±0.004
)
R
Recommended
PCB Thickness
1.0 ± 0.1 mm
Unit: mm (in.)
■ DIMENSIONS
P/N FCN-248Q080-L/DS has
been
discontinued
240 Series FC-AL
6
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ PC BOARD LAYOUT
Unit: mm (in.)
0.81
±0.05
(0.032
±0.002
)
0.81
±0.05
(0.032
±0.002
)
24.13
±0.1
(0.95
±0.004
)
36.27
±0.1
(1.428
±0.004
)
1.27
±0.05
(0.05
±0.002
)
4.22
±0.05
(1.66
±0.002
)
3.70
±0.05
(0.146
±0.002
)
2.60
±0.05
(0.102
±0.002
)
0.28
±0.1
(0.011
±0.004
)
1.52
±0.1
(0.60
±0.004
)
3.50
±0.1
(1.38
±0.004
)
1.37
±0.05
(0.054
±0.002
)
R 0.7
(0.028)
#1
#20
1.52
±0.05
(0.60
±0.002
)
1.52
±0.05
(0.60
±0.002
)
#40
#20
#1
#21
41.10 (1.618)
32.47 (1.278)
29.87 (1.176)
25.77 (1.015)
24.13 (0.95)
1.27 (0.05)
20
40
1
21
1.27
±0.3
(0.05
±0.012
)
1.27 (0.05)
24.13
±04
(0.95
±0.016
)
26.60 (1.047)
32.47 (1.278)
39.96
±04
(1.562
±0.016
)
10.0 (0.394)
10.0 (0.394)
1.0 (0.039)
4.0 (0.157)
12.0 (0.472)
12.7 (0.5)
ESD contact
R 0.635(0.25)
R 1.6 (0.63)
6.72
(0.264)
3.65
(0.139)
.95
(0.039)
5.0±0.15
(1.197±0.006)
7.0 (0.276)
PLUG, SMT (STRADDLE MOUNT) FIBER CHANNEL
■ DIMENSIONS
■ PART NUMBER
FCN-248Q040-L/ES
Recommended
PCB Thickness
1.0 ± 0.1 mm
Unit: mm (in.)
248Q Series SCA.2
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/FS
Unit: mm (in.)
Insulator
54.2 (2.134)
57.87 (2.278)
66.5 (2.618)
18.2 (0.717)
55.27 (2.176)
49.53 (1.95)
1.27 (0.05)
No.1
5.0
(0.197)
Pos/2+1
66.4(2.614)
Pos/2
Pos
7.0
(0.276)
X
X
50.165 (1.975)
58.765 (2.314)
61.1 (2.406)
64.7 (2.547) Retention leg pitch
To initial point of contact
0.2 A
0.20 (0.008)
0.635
(0.025)
ø1.55
+0
-0.05
ø0.061
+0
)
- 0.002
(
4.3
(0.169)
-A-
2.5
(0.098)
1.5
(0.060)
1 (0.040)
1
(0.040)
2.1
(0.083)
X-X(5/1)
Sect. X-X
8.8(0.346)
8.2(0.322)
6.6 (0.256)
5.9 (0.232)
1.6
(0.063)
2.0
±0.25
(0.079
±0.001
)
To initial point of contact
To initial point of contact
1.85
±0.25
(0.073
±0.001
)
2.2(0.087)
2.96(0.117)
2.65
±0.15
(0.104
±0.006
)
2.65
±0.15
(0.104
±0.006
)
13.8
(0.543)
8.8
(0.346)
Retention Leg
Signal contact
64.7±0.05 (2.547±0.002)
58.765
±0.05 (2.314±0.0002)
0.635 x 79= 50.165
(0.025 x 3.110 = 1.975)
80-0.42
+0
-0.05
(80-0.017
+0
)
- 0.002
0.1 B
No. 80
No. 40
Recommended PC Board
mounting dimensions
Thickness 1.0
±0.1
mm (0.040
±0.004
)
No.41
No. 1
2.65±0.05
(0.104±0.002)
2.65
±0.05
(0.104±0.002)
4-ø1.2
±0.05
(4-ø0.047
±0.002
)
Through hole
2-ø1.6
±0.05
(2-ø0.063
±0.002
)
0.635
(0.025)
4.3
(0.169)
-B-
2.0±0.1
(0.079
±0.004
)
2.2±0.1
(0.0887
±0.004
)
4.7±0.1
(0.185
±0.004
)
SINGLE SIDE SMT SCA.2
240 Series FC-AL
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
SOCKET, VERTICAL MOUNT FIBER CHANNEL
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
Unit: mm (in.)
BWPDEDNEMMOCER
SSENKCIHTSSENKCIHT
SSENKCIHT
SSENKCIHTSSENKCIHT
REBMUNTRAP
TCATNOCLANGIS
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP
)A(HTGNELTSOP)A(HTGNELTSOP
TCATNOCDSE
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP
)B(HTGNELTSOP)B(HTGNELTSOP
mm8.0:TPSC/L-040B442-NCF)470.0(88.1)470.0(88.1
mm6.1:TPSB/L-040B442-NCF)011.0(97.2)601.0(07.2
mm0.2:TPSD/L-040B442-NCF)321.0(21.3)321.0(21.3
mm4.2:TPSE/L-040B442-NCF)421.0(41.3)631.0(54.3
mm2.3:TPSF/L-040B442-NCF)061.0(60.4)861.0(72.4
43.60±0.4 (0.716±0.016)
41.40 (0.630)
37.40 (1.472)
34.40 (1.354)
29.67 (1.090)
26.03 (1.025)
24.13
±0.3 (0.95±0.012)24.13±0.3 (0.95±0.012)
1.27
±0.2
(0.05±0.008)
A
A
31.60 (1.244)
15°
40
20
1
FT
5.30±0.15 (0.209±0.006)
7.10
±0.3 (0.280±0.012)
B
B
34.11±0.4 (1.343±0.016)
24.13±0.4 (0.95±0.016)
1.27
±0.3 (0.05±0.008)
2.70±0.3
(0.106±0.012)
2.79
±0.2
(0.109±0.008)
11.50
±0.3
(0.453±0.012)
9.85
±0.3
(0.388±0.012)
6.50
(0.256)
3.50
(0.138)
ESD contact
1.70 (0.067)
2.20 (0.086)
1.45
(0.057)
#2#1
#21
#22
2.60
±0.1
(0.102
±0.004
)
2.70
±0.1
(0.106
±0.004
)
Ø 0.80
±0.8
(Ø 0.031
±0.003
)
#39
#40
#19
#20
Ø 2.60
±0.1
(Ø 0.102
±0.004
)
1.27 (0.05)
4.99
(0.196)
1.905 (0.075)
0.952 (0.037)
2.20
±0.1
(0.086
±0.004
)
Ø 2.60
±0.1
(Ø 0.102
±0.004
)
34.11(1.343)
240 Series (SCA.2)
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
SOCKET, VERTICAL MOUNT
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
(A)
(B)
69.00 (2.71)
62.80 (2.47)
59.80 (2.35)
55.07 (2.17)
51.80 (2.039)
49.53 (1.95)
57.00 (2.44)
1.27 (0.05)
5.30 (0.208)
7.10 (0.280)
1.27 (0.05)
49.53 (1.95)
59.51 (2.44)
2.20 (.086)
6.50 (.256)
3.50 (.138)
9.85 (.388)
11.50 (.457)
1.45 (.057)
Electrostatic Discharge
59.51 (2.031)
1.905 (0.075)
0.952 (0.037)
2.20
±0.1
(0.086
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
0.80
±0.1
(0.031
±0.004
)
2.70
±0.1
(0.106
±0.004
)
#79
#80
#41
#1
#2
#39
#40
#42
Unit: mm (in.)
BWPDEDNEMMOCER
SSENKCIHTSSENKCIHT
SSENKCIHT
SSENKCIHTSSENKCIHT
REBMUNTRAP
TCATNOCLANGIS
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP
)A(HTGNELTSOP)A(HTGNELTSOP
TCATNOCDSE
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP
)B(HTGNELTSOP)B(HTGNELTSOP
mm8.0:TPSC/L-080B442-NCF)470.0(88.1)470.0(88.1
mm6.1:TPSB/L-080B442-NCF)011.0(97.2)601.0(07.2
mm0.2:TPSD/L-080B442-NCF)321.0(21.3)321.0(21.3
mm4.2:TPSE/L-080B442-NCF)421.0(41.3)631.0(54.3
mm2.3:TPSF/L-080B442-NCF)061.0(60.4)861.0(72.4
240 Series (SCA.2)
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop-
erty of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Fujitsu SCA.2 User manual
- Type
- User manual
- This manual is also suitable for
Fujitsu SCA.1 is a half pitch connector conformed to SCA system (80 pins). It has mating guide and ESD protection to ensure safety and reliability. The product is a hot-pluggable device, which means it can be plugged or unplugged without turning off the power. Ground contacts mate first before other contacts mate when engagement is done (conforms to SCA.2 specification). To prevent pin-bending, bellows contacts are used. The connector comes in 2 types: SMT plug that mates the center of a SMT plug to the center of a PCB and a plug that is 0.9 mm (0.035 in.) off-set from center.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Fujitsu FKB4726 SERIES User manual
-
-
-
-
-
Fujitsu FTP-040HS User manual
-
-
-
-
Other documents
-
Panduit PDL-193 Datasheet
-
Delta Electronics HAH1040 User manual
-
TDK T61956 Datasheet
-
Sindoh D200 series User manual
-
Timken Engineering Owner's manual
-
Timken Industrial Bearing Maintenance Owner's manual
-
Gastite LFLOPPY-20 Installation guide
-
Suzuki LT160E User manual
-
Honeywell EVN2000 Series User manual
-
Mazda 6 2003-2007 Transaxle G35M-R Workshop Manual
