Fujitsu 560H is suited for card detection and plugging in systems that require hot swapping. The ejector makes makes card removal easy and allows for easy system plugging. The gold plating on the contacts ensures good conduction and resistance to corrosion. The conformity to JEIDA and PCMCIA standards ensures compatibility with most systems. The raised mounting type allows for components to be mounted underneath the connector, saving space on the PCB. The low-profile connectors are ideal for applications where space is limited.
Fujitsu 560H is suited for card detection and plugging in systems that require hot swapping. The ejector makes makes card removal easy and allows for easy system plugging. The gold plating on the contacts ensures good conduction and resistance to corrosion. The conformity to JEIDA and PCMCIA standards ensures compatibility with most systems. The raised mounting type allows for components to be mounted underneath the connector, saving space on the PCB. The low-profile connectors are ideal for applications where space is limited.
1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■ FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
– 55°C to + 85°C
DC 0.5 A
AC 250 V
40 mΩ max (6 VDC, 0.1 A)
1000 MΩ min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact type
Power, ground pins
Card detection pins
Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■ MATERIALS
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
:
PPS resin
(for SMT and type III card connectors)
Copper alloy
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specification
Item
Insulating material
Conductor
Plating
560H Series Connector Conforming to Ver. 4
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ ORDERING PART NUMBER [PLUG]
V4: Conforms to Ver.4
E4: Conforms to Ver.4 and anti-ESD
Specification
Plating G: Gold plating
Number of contacts: 68, 136
Body P: Plug
Pin type 4: Straight
5: Right-angle
8: SMT
560 series connector
Fujitsu connector
FCN-56 5 P 068-G / XC-V4
■ ORDERING PART NUMBER [SOCKET]
FCN-56 8 J 068-G / 0
Terminal type 0: PC board double-sided straddle type
B:
PC board single-sided mounting type
Plating G: Gold plating
Number of contacts: 68
Body J: Socket
Pin type 8: SMT
560 series connector
Fujitsu connector
560H Series Connector Conforming to Ver. 4
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE
((
((
(WITH NO EJECTOR, LOW-PROFILE TYPE
))
))
)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/C-V4
3
(0.118)
4
(0.157)
1.51 (0.059)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
50.8 (2)
1.27 (0.05) × (34-1) = 41.91 (1.65)
1.27 (0.05)
3
(0.118)
42 (1.65)
12.2 (0.48)
58.7 (2.31)
24.9 (0.98)
1.27 (0.05)
1.27 (0.05)
1.27 (0.05) × (34-1) = 41.91 (1.65)
No.1
No.35 No.68
No.34
2- ø 2.8 (0.11)
2.5mm (0.098)
deep spot facing
3.6 (0.141)
Part number: FCN-565P068-G/01-V4
•
Models with a board lock (metal fitting for direct mounting) are also available.
Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
• Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
FCN-565P068-G/02-V4 (10 mm (0.394 in.))
• Models which support Type III are also available. Part number: FCN-565P068-G/17-V4
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
Unit: mm (in.)
50.8 (2)
0.51 (0.02)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7 (0.276)
3 (0.118)
11.2 (0.44)
5 (0.197)
1 (0.039)
4.25 (0.167)
3.5 (0.138)
2- ø 2.8 (0.110)
41.91 (1.65)
1.27 (0.05)
59.7(2.35)
2.42 (0.095)
35.2 (1.39)
2.5mm (0.098)
deep spot facing
41.91 (1.65)
1.27 (0.05)
No.17
No.51
No.34
No.68
No.35
No.1
1.27 (0.05)
4 (0.157)
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
50.8 (2)
±0.1 (0.0039)
41.91(1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.
In order to avoid damage to the connector, do not pull out the card at an angle.
560H Series Connector Conforming to Ver. 4
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
0.51 (0.059)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
8 (0.315)
7 (0.276)
4.5 (0.177)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
2- ø 2.2 (0.0866)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
No.1 No.17
No.35 No.51
No.34
No.68
1.27 (0.05)
53.7 (2.114)
8.5
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/F-V4
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
7 (0.276)
2.5
(0.098)
1 (0.039)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.059)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
1.27 (0.05)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
(2) M2.5 (0.098 in.)
thread nut
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
No.68 No.51
No.35
No.1No.17No.34
4(0.157)
Unit: mm (in.)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
50.8 (2)
±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
2- ø 2.8 (0.110)
±0.1 (0.0039)
<To be mounted on back of PC board>
No.1
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
560H Series Connector Conforming to Ver. 4
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/A-V4
3 (0.118)
4.5 (0.177)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
11.2 (0.441)
50.8 (2)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
59.7 (2.35)
2.42 (0.095)
35.2 (1.39)
2- ø 2.8 (0.110)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
3 (0.118)
No.1 No.17 No.34
No.68No.51No.35
2.5mm (0.098)
deep spot facing
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
1.27 (0.05)
50.8 (2)
±0.1 (0.0039)
±0.05 (0.0020)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
No.35
No.1
No.68
No.34
6.7 (0.264)
±0
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P136-G/0-V4
7
(0.276)
7
(0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
35.2 (1.39)
11.2 (0.441)
2.42 (0.095)
59.7 (2.35)
50.8 (2)
11 (0.433)
3
(0.118)
4 (0.157)
No.35
No.1
No.35
No.1
No.34
No.68
No.34
No.68
1.905 (0.075)
±0.05 (0.0020)
No.35
No.1
1.905 (0.075) × (8-1)
= 13.335 (0.525)
No.1
No.35
±0.1 (0.0039)
50.8 (2)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
No.34
No.68
±0.05 (0.0020)
2- ø 2.8 (0.110)
±0.1 (0.0039)
136- ø 1 (0.039)
±0.05 (0.0020)
560H Series Connector Conforming to Ver. 4
6
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/C34-V4
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.1
No.35
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
No.34
2- ø 2.8 (0.110)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
0.51 (0.02)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7
(0.276)
59.7 (2.35)
50.8 (2)
2- ø 2.8 (0.110)
2.42 (0.095)
35.2 (1.386)
11.2 (0.441)
No.1
No.35
No.34
No.68
7 (0.276)
4 (0.157)
59 (2.32)
2.5mm (0.098)
deep spot facing
83.38 (3.283)*A
560H Series Connector Conforming to Ver. 4
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)
Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)
Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
7 (0.276)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
7 (0.276)
11 (0.433)
4.8 (0.189)
2.1 (0.083)
4 (0.157)
No.1 No.17
No.35 No.51 No.68
No.18 No.34
No.52
ø 2.8 (0.110)
2- ø 2.8 (0.110)
2.5mm (0.098)
deep spot facing
5 (0.197)
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,
instead of FCN-565P068-G/XC-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
(Card insertion side)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
Unit: mm (in.)
Unit: mm (in.)
560H Series Connector Conforming to Ver. 4
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black)
Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
Unit: mm (in.)
7 (0.276)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
7 (0.276)
11 (0.433)
4.8 (0.189)
2.1 (0.083)
4 (0.157)
No.1 No.17
No.35 No.51 No.68
No.18 No.34
No.52
2- ø 2.8 (0.110)
2.5mm (0.098)
deep spot facing
5 (0.197)
ø 2.8 (0.110)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of
FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
(Card insertion side)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
Unit: mm (in.)
560H Series Connector Conforming to Ver. 4
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Unit: mm (in.)
Part number: FCN-565P068-G/XF-V4 (Button color: Black)
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
2.5
7 (0.276)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
4.8 (0.189)
42 (1.654)
35.5 (1.398)
7 (0.276)
1 (0.039)
2.5mm (0.098)
deep spot facing
59 (2.323)
2.1 (0.083)
4 (0.157)
No.68 No.35
No.1No.34
ø 2.8 (0.110)
When a card is ejected
When a card is inserted
5 (0.197)
Unit: mm (in.)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.1
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
Ejector button
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
No.35
Regardless of how the connector is mounted on the PC
board, a card can be inserted with its face upward.
Nut buried
560H Series Connector Conforming to Ver. 4
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK
MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/W-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
1.27 (0.05)
50.8 (2)
±0.1(0.0039)
±0.05 (0.0020)
41.91 (1.65)
±0.1 (0.0039)
No.1
No.68
6.7
+0
No.2
No.3
(Card insertion side)
2- ø 2.8 (0.110)
68- ø 1 (0.039)
±0.1(0.0039)
±0.05 (0.0020)
■ MOUNTING EXAMPLE
M2.5 screw
Nut
Mounting height
4.5mm(0.177in.)
Nut
Unit: mm (in.)
Unit: mm (in.)
Unit: mm (in.)
3 (0.118)
6 (0.236)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
4.5
(0.177)
2.5 (0.098)
2.1
(0.083)
5 (0.197)
3 (0.118)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
ø 2.8
3.5
(0.138)
35.2 (1.386)
R 1.4
2- ø 2.8 (0.110)
83.38 (3.283)
3.7 (0.146)
10 (0.394)
When a card is ejected
When a card is inserted
11 (0.433)
78.5 (3.091)
42 (1.654)
35.5 (1.398)
7 (0.276)
2.1 (0.083)
No.68
No.35
No.1 No.34No.17
No.51
2.5 (0.098)
5 (0.197)
4.25 (0.167)
560H Series Connector Conforming to Ver. 4
11
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM
(0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J25-V4 (supports type I, II card)
Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
3(0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
8
(0.315)
4.5 (0.177)
9 (0.354)
4.8 (0.189)
8 (0.315)
2.42
(0.095)
11.2 (0.441)
2- ø 2.2 (0.087)
76.48 (3.011)
81.88 (3.224)
59.7 (2.35)
50.8 (2)
0.2 (0.0078)35.2 (1.386)
4.25 (0.167)
3.5
(0.138)
5.2 (0.205)
10 (0.394)
When a card is inserted
12.5 (0.492)
42 (1.654)
35.5 (1.398)
4.5 (0.177)
59 (2.323)
No.68
No.35
No.1
No.34
11.5 (0.453)
7
(0.276)
50.8 (2)
8.5 (0.335)
8 (0.315)
ø 2.2 , 4.5 deep
When a card is ejected
5 (0.197)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
±0.1 (0.0039)
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
No.1
No.34
No.35
No.68
3.42 (0.135)
–0
–0
+0
33.78 (1.330)
–0
76.48 (3.011)
±0.1
71.88 (2.830)
+0
82.88 (3.263)
–0
51.7 (2.035)
+0
61.7 (2.429)
–0
41.7 (1.642)
+0
50.8 (2)
±0.1 (0.0039)
61.7 (2.429)
–0
±0.1 (0.0039)
±0.05 (0.0020)
6.58 (0.259)
23.78 (0.936)
4 - ø 2.8 (0.110)
68- ø 1 (0.0394)
Unit: mm (in.)
Component mounting is prohibited in the hatched areas.
• Components with a height of 4.3 mm (0.169 in.) maximum can
be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws
(when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
Unit: mm (in.)
560H Series Connector Conforming to Ver. 4
12
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
Part number: FCN-565P068-G/0442-E4 (with FG clip)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
5 (0.197)
0.51 (0.020)
2- ø 2.6
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
6 (0.236)
11.2 (0.441)
35.2 (1.386)
2.42
(0.095)
76.31 (3.00)
79.3 (3.12)
86.31 (3.40)
4.8 (0.189)
7.8 (0.307)
1.2 (0.047)
8.5
(0.335)
2- ø 2.35 (0.0925)
2- ø 4 (0.157)
2- ø 6 (0.236)
59.7 (2.35)
50.8 (2)
2-R2.8
0.2 (0.008)
40 (1.57)
42.81 (1.69)
R4
12.9
10 (0.394)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
34 (1.339)
57.51 (2.26)
22 (0.866)
No.35 No.68
No.1
No.34
9 (0.354)
5 (0.197)
12 (0.472)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
34 (1.339)
22 (0.866)
No.35 No.68
No.1
No.34
9 (0.354)
5 (0.197)
12 (0.472)
2- ø 2.6
11.2 (0.441)
35.2 (1.386)
2.42
(0.095)
76.31 (3.00)
79.3 (3.12)
86.31 (3.40)
59.7 (2.35)
50.8 (2)
2-R2.8
0.2 (0.008)
40 (1.57)
42.81 (1.69)
0.77 (When a card is ejected)
8.07 (When a card is inserted)
R4
12.9
10 (0.394)
5 (0.197)
0.51 (0.020)
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
6 (0.236)
4.8 (0.189)
1.2 (0.047)
8.5
(0.335)
2- ø 2.35 (0.0925)
2- ø 4 (0.157)
2- ø 6 (0.236)
0.77 (When a card is ejected)
8.07 (When a card is inserted)
Component mounting is prohibited in the
hatched areas.
∗2.
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2–1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
61.7 (2.43)
–0
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
76.31 (3.0)
±0.1 (0.0039)
7.8 (0.307)
±0.1 (0.0039)
3.42 (0.135)
–0
6.58 (0.259)
–0
42.81 (1.69)
±0.1 (0.0039)
2- ø 4.5 (0.177)
+0.2 (0.0079)
–0
2- ø 8 (0.315)
–0
22 (0.866)
±0.1 (0.0039)
34 (1.339)
±0.1 (0.0039)
57.15 (2.25)
±0.1 (0.0039)
2- ø 2 (0.079)
±0.1 (0.0039)
5.715 (0.225)
±0.05 (0.0020
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
2- ø 3.5 (0.138)
±0.1 (0.0039)
2- ø 3.5 (0.138)
±0.1 (0.0039)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
61.7 (2.43)
–0
3.42 (0.135)
–0
6.58 (0.259)
–0
42.81 (1.69)
±0.1 (0.0039)
2- ø 4.5 (0.177)
+0.2 (0.0079)
–0
2- ø 8 (0.315)
–0
22 (0.866)
±0.1 (0.0039)
34 (1.339)
±0.1 (0.0039)
76.31 (3.0)
±0.1 (0.0039)
∗2.
∗2.
Component mounting is prohibited in the
hatched areas.
∗2.
68- ø 1 (0.039)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is
used) to mount the connector to the board.
Unit: mm (in.)
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm
(0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
560H Series Connector Conforming to Ver. 4
13
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.)
RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J38-E4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.
Unit: mm (in.)
Unit: mm (in.)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
SMT•FG Clip
4.8 (0.189)
8 (0.315)
10 (0.394)
28.5 (1.12)
83.38 (3.28)
8 (0.315)
11 (0.433)
2.42 (0.0953)
35.2 (1.385)
11.2 (0.441)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
2- ø 2.2 (0.0866)
0.2 (0.0079)
40 (1.57)
R1.4
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.40)
No.1
No.35
11.5 (0.453)
28.45 (1.12)
No.68
2 (0.079)
8.5 (0.335)
No.34
1.8 (0.071)
4.5 (0.177)
ø 2.8 (0.110)
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.1
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
No.34
No.68
4- ø 2.8 (0.110)
±0.1 (0.0039)
34 (1.34)
±0.05 (0.002)
29.45
±0.1 (0.0039)
67.31 (2.65)~68.0 (2.68)
3 (0.118)
±0.1 (0.0039)
4 (0.157)
±0.1 (0.0039)
28.5 (1.12)
40 (1.57)
±0.1 (0.0039)
560H Series Connector Conforming to Ver. 4
14
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0221-E4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
83.38 (3.28)
40 (1.57)
35.2 (1.39)
11.2 (.441)
67.31 (2.65)
59.7 (2.35)
50.8 (2.00)
34 (1.34)
1 (.039)
40 (1.574)
1 (.039)
8 (.315)
11 (.433)
10 (.394)
φ 2.8 (.110)
φ 2.8 (.110)
R1.4
10.5 (.413)
5 (.197)
11
(.433)
1.8
(.071)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.398)
51.7 (2.04)
No. 68
No. 1
No. 34
No. 35
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
0.51(0.020)
7
7
3 (0.118)
4.8 (0.189)
(.276)
(.276)
40
±0.1
(1.57
±.002
)
9.5
-0 (.347-0)
4.4
-0 (.173-0)
6-0 (.236-0)5-0(.197-0)
51.7
+0
(2.035
+0
)
61.7
-0 (2.429-0)
75
-0 (2.95-0)
34
±0.05
(1.33
±0.002
)
67.31
+0.2
(2.65
+0.008
)
50.08
±0.1
(2.00
±0.004
)
1.27 x (68/2-1) = 41.91
±0.1
(1.65
±0.004
)
1.27
±0.05
(0.05
±0.002
)
1.905
±0.05
(.075
±0.002
)
3.810
±0.05
(.150
±0.002
)
5.715
±0.05
(.225
±0.002
)
68-φ 1
±0.05
(.039
±0.002
)
Note 2
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2 COMPONENT CON NOT BE
MOUNTED IN THIS AREA
NOTE 3 COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
NOTE 4 UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
560H Series Connector Conforming to Ver. 4
15
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
83.38 (3.28)
40 (1.57)
35.2 (1.39)
11.2 (.441)
67.31 (2.65)
59.7 (2.35)
50.8 (2.00)
34 (1.34)
1 (.039)
40 (1.574)
1 (.039)
8 (.315)
11 (.433)
10 (.394)
φ 2.8 (.110)
φ 2.8 (.110)
10.5 (.413)
5 (.197)
11
(.433)
1.8
(.071)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.398)
51.7 (2.04)
No. 68
No. 1
No. 34
No. 35
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
0.51(0.020)
7
7
3 (0.118)
4.8 (0.189)
(.276)
(.276)
40
±0.1
(1.57
±.002
)
9.5
-0 (.347-0)
4.4
-0 (.173-0)
6-0 (.236-0)5-0(.197-0)
51.7
+0
(2.035
+0
)
61.7
-0 (2.429-0)
75
-0 (2.95-0)
34
±0.05
(1.33
±0.002
)
67.31
+0.2
(2.65
+0.008
)
50.08
±0.1
(2.00
±0.004
)
1.27 x (68/2-1) = 41.91
±0.1
(1.65
±0.004
)
1.27
±0.05
(0.05
±0.002
)
1.905
±0.05
(.075
±0.002
)
3.810
±0.05
(.150
±0.002
)
5.715
±0.05
(.225
±0.002
)
68-φ 1
±0.05
(.039
±0.002
)
Note 2
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2 COMPONENT CON NOT BE
MOUNTED IN THIS AREA
NOTE 3 COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
NOTE 4 UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Part number: FCN-565P068-G/0231-E4
560H Series Connector Conforming to Ver. 4
16
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)
■ DIMENSIONS
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
7
(0.276)
7
(0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
4.8 (0.189)
4.8 (0.189)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
2.42 (0.0953)
40 (1.57)
1 (0.039)
35.2 (1.385)
11.2 (0.441)
8 (0.315)
83.38 (3.28)
10 (0.394)
11 (0.433)
3.7 (0.146) (When a card is ejected)
40 (1.57)
78.5 (3.09)
59 (2.32)
No.35
No.1
42 (1.65)
35.5 (1.40)
11 (0.433)
4 (0.157)
No.1
No.35
No.68
No.34
No.34
No.68
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.1
No.35
No.1
No.35
1.905 (0.075)
±0.05 (0.0020)
1.905 (0.075) × (8-1) = 13.335 (0.525)
±0.05 (0.0020)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
40 (1.575)
±0.1 (0.0039)
136- ø 1
±0.05
No.34
No.68
No.34
No.68
7
(0.276)
7
(0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
4.8 (0.189)
4.8 (0.189)
34 (1.34)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
1 (0.039)
11.2 (0.441)
35.2 (1.385)
40 (1.57)
83.38 (3.28) 2.42 (0.0953)
3.7 (0.146)
11 (0,.433)
10
(0.394)
11 (0.433)
40 (1.57)
No. 1
No. 35
No. 1
No. 35
No. 68
No. 34
No. 34
No. 68
4 (0.157)
42 (1.654)
35.5 (1.398)
11
(0.433)
3 (0.118)
10
(0.394)
42 (1.654)
35.5 (1.398)
2.1 (0.083)
Connector with the left and right ejector
buttons
Part Number: FCN-565P 136G/005-V4
Unit: mm (in.)
Unit: mm (in.)
Unit: mm (in.)
Part Number: FCN-565P136-G/Z-V4
560H Series Connector Conforming to Ver. 4
17
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS
■ DIMENSIONS
Unit: mm (in.)
Unit: mm (in.)
8 (.315)
50.6 (1.99)
25 (.984)
7.22 (.284)
11 (.433)
10 (.394)
67.31 (2.650)
59.7 (2.35)
34 (1.34)
φ 2.8 (.110)
7 (.275)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.40)
2.1 (.083)
4 (.157)
4.8 (.189)
4 (.157)
8 (.315)
50.6 (1.99)
25 (.984)
7.22 (.284)
11 (.433)
10 (.394)
67.31 (2.650)
59.7 (2.35)
34 (1.34)
φ 2.8 (.110)
51 (2.01) min.
7 (.275)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.40)
2.1 (.083)
4 (.157)
4.8 (.189)
4 (.157)
Right Button
FCN-560A08
FCN-560A14
Button
Color
BLACK
BEIGE
ESD
Left Button
FCN-560A16
FCN-560A22
Button
Color
BLACK
BEIGE
ESD
560H Series Connector Conforming to Ver. 4
18
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE
■ DIMENSIONS
Part number: FCN-564P068-G/A-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
1.27 (0.05)
7.63 (.300)
No.1
1.905 (0.075)
5.715 (0.225)
1.27 (0.05)
No.35
No.17
No.51
No.34
No.68
5.50 (.216)
10.80 (.425)
6.00 (.236)
2.40 (.0945)
44.80 (1.76)
51.80 (2.039)
7.00 (.276)
25.80 (1.016)
8.30 (.327)
3.00 (.118)
59.74 (2.35)
1.27 x (34-1) = 41.9 (1.65)
51.8 (2.039)
±0.1 (0.0039)
No.1
No.68
1.27 x (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
1.905 (0.118)
±0.05 (0.0020)
68- Ø 1 (0.0394)
No. 35
560H Series Connector Conforming to Ver. 4
19
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/0-V4
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
66.04 (2.6)
±0.1 (0.0039)
No.2
No.1
No.68
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
1.905 (0.118)
±0.05 (0.0020)
68- Ø 1 (0.0394)
±0.05 (0.0020)
2- Ø 2.8 (0.110)
±0.1 (0.0039)
No.3
Ø 1.00 (0.0394) used for polarization post
±0.1 (0.0039)
41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
4 (0.157)
No.1
3 (0.118)
11.2 (0.441)
5.5 (0.217)
1.905 (0.075)
5.715 (0.225)
5 (0.197)
4.25 (0.167)
2- Ø 2.8
(0.110)
2.42 (0.095)
74 (2.91)
66.04 (2.6)
50.8 (2)
41.91 (1.65)
1.27 (0.05)
35.2 (1.390)
59.7 (2.35)
7 (0.394)
3.5
(0.138)
No.35
No.17
No.51
No.34
No.68
6 (0.236)
2- Ø 2.8 (0.110)
1 (0.039)
Polarization Post
560H Series Connector Conforming to Ver. 4
20
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/X0-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
74 (2.91)
67.31 (2.65)
66.04 (2.6)
34 (1.34)
50.8 (2)
1.27 (0.05)
41.91 (1.65)
35.2 (1.39)
83.38 (3.28) 2.42 (0.095)
1.905 (0.075)
5.715 (0.225)
4 (0.157)
3 (0.118)
4.8 (0.177)
78.5 (3.09)
2.1 (0.083)
42 (1.653)
35.5 (1,40)
No.1
No.35
No.17
No.51
No.34
No.68
7 (0.276)
10 (0.394)
3.7 (0.146)
(When a cardis ejected)
11 (0.433)
(When a cardis inserted)
40 (1.57)
36 (1.42)
8 (0.315)
2 – Ø 2.8 (0.110)
R1.4
Ø 2.8 (0.110)
5 (0.197)
3.5 (0.138)
4.25 (0.167)
66.04 (2.6)
±0.1 (0.0039)
No.2
No.1
No.68
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
68- Ø 1 (0.0394)
±0.05 (0.0020)
2- Ø 2.8 (0.110)
±0.1 (0.0039)
No.3
Unit: mm (in.)
Unit: mm (in.)
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Fujitsu 560H is suited for card detection and plugging in systems that require hot swapping. The ejector makes makes card removal easy and allows for easy system plugging. The gold plating on the contacts ensures good conduction and resistance to corrosion. The conformity to JEIDA and PCMCIA standards ensures compatibility with most systems. The raised mounting type allows for components to be mounted underneath the connector, saving space on the PCB. The low-profile connectors are ideal for applications where space is limited.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Supermicro PWS-303-PQ Datasheet
-
Delta Electronics KHB1248EHS User manual
-
-
Timken Industrial Bearing Maintenance Owner's manual
-
Timken Engineering Owner's manual
-
Shibaura N843L Workshop Manual
-
Mazda 5 Engine User manual
-
Tyco Electronics SOLARLOK 4-1394462-6 Installation guide
-
Subaru 2004 User manual
-
Mitsubishi 4D56 User manual
