1
■ MATERIALS■ SPECIFICATIONS
■ FEATURES
• Half pitch connector conformed to SCA system (80
pins).
• Add mating guide and ESD protection to do plug-in
safety and reliability (They are newly added on SCA.
2CN).
• Hot-plugging. Ground contacts mate first before other
contacts mate when engagement is done (conforms to
SCA.2 specification).
• To prevent pin-bending, bellows contacts are used.
• Plug: 2 types are available.
1) The center of a SMT plug mates the center of a PCB.
2) 0.9 mm (0.035 in.) off-set from center
Specifications
–55°C to +105°C
DC 1 A
AC 240 V
40 mΩ max. (DC 6 V, 0.1 A)
1000 MΩ min. (DC 500 V)
AC 750 V for 1 minute
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstand voltage
)
Item
Insulator
Conductor
Plating
Materials
Polyester (UL94V-0)
Copper alloy
Contact
Terminal
Gold plating
Palladium plating
SCA.1, SCA. 2 INTERFACE CONNECTOR
240 SERIES (SCA)
240 Series (SCA.1)
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
PLUG, SMT (STRADDLE MOUNT)
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/BS
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0 (0.039)
4.0 (0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
49.53
±0.1
(1.950
±0.004
)
57.92
±0.05
(2.280
±0.001
)
3.50
±0.1
(0.137
±0.004
)
1.52
±0.1
(0.059
±0.004
)
3.70
±0.1
(0.145
±0.004
)
1.52
±0.05
(0.059
±0.001
)
3.70
(0.145)
1.27
±0.05
(0.050
±0.001
)
1.52
±0.05
(0.059
±0.001
)
24.765 (0.975)
0.76
±0.05
(0.029
±0.001
)
R
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
PLUG, SMT [0.9 mm (0.035 in.) OFFSET]
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/CS
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0 (0.039)
4.0 (0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
49.53
±0.1
(1.950
±0.004
)
57.92
±0.05
(2.280
±0.001
)
3.50
±0.1
(0.137
±0.004
)
1.52
±0.1
(0.059
±0.004
)
3.70
±0.1
(0.145
±0.004
)
1.52
±0.05
(0.059
±0.001
)
3.70
(0.145)
1.27
±0.05
(0.050
±0.001
)
1.52
±0.05
(0.059
±0.001
)
24.765 (0.975)
0.76
±0.05
(0.029
±0.001
)
R
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
240 Series (SCA.1)
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
SOCKET, VERTICAL MOUNT
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-244B080-G/AS
55.07 (2.168)
62.15 (2.446)
49.53 (1.950)
58.51 (2.031)
2.90
(0.114)
0.50
(0.019)
0.30
(0.011)
0.30
(0.011)
#40
#80
#41
#1
7.10
(0.279)
6.59
(0.255)
9.85
(0.387)
2.69
(0.105)
Hold on bar
Housing
59.51 (2.031)
1.905 (0.075)
0.952 (0.037)
2.20
±0.1
(0.086
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
0.80
±0.1
(0.031
±0.004
)
2.70
±0.1
(0.106
±0.004
)
#79
#80
#41
#1
#2
#39
#40
#42
Unit: mm (in.)
240 Series (GBIC)
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
PLUG, SMT (STRADDLE MOUNT), 20 PIN
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-248Q020-L/ES
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
#1
#11
#20
#10
27.38 (1.078)
23.03 (0.907)
19.77 (0.778)
11.43 (0.45)
1.27(0.05)
7.0 (0.276)
5.0 (0.197)
FT
110
20
1.27(0.05)
0.635(0.025)
1.27(0.05)
9.25(0.364)13.12(0.517)
26.24 (1.033)
Retention leg
R 0.635 (0.025)
1.0(0.004)
3.55(0.149)
6.72(0.264)
1.0(0.004)
R 1.60(0.629)
0.50 (0.019)
A
A
12.70(0.5)
1.52(0.060)
23.06 (0.908)
1.37
±0.05
(0.908
±0.002
)
1.27(0.05)
0.81±0.03
(0.032
±0.001
)
0.05 S W
2 PLC
0.81±0.03
(0.032
±0.001
)
0.05 S W
TYP
1.52(0.060)
TYP
2.33(0.092)
1.31(0.052)
TYP
1.52
(0.060) 0.05 S W
TYP
0.81±0.03
(0.032
±0.001
)
0.05 S W
TYP
4.22(0.166)
19.87
±0.2
(0.782
±0.008
)
3.19(0.126)
2.53(0.099)
3.50(0.138)
0.28(0.011)
2.60
±0.4
(0.102
±0.016
)
V
R 0.7
(0.028)
240 Series (SCA.2)
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
PLUG, SMT [0.9 mm (0.035 in.) OFFSET] SCA.2
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
61.67
±0.1
(2.427
±0.004
)
0.81
±0.05
(0.031
±0.001
)
0.81
±0.05
(0.031
±0.001
)
49.53
±0.1
(1.950
±0.004
)
58.17
±0.1
(2.290
±0.004
)
4.22
±0.05
(0.166
±0.001
)
1.27
±0.5
(0.050
±0.001
)
1.37
±0.5
(0.053
±0.001
)
3.50
±0.1
(0. 137
±0.004
)
1.52
±0.05
(0. 059
±0.001
)
1.52
±0.05
(0. 059
±0.001
)
3.00
±0.1
(0.118
±0.004
)
3.70
±0.5
(0.145
±0.001
)
1.52
±0.1
(0.059
±0.004
)
0.28
±0.1
(0.011
±0.004
)
R
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0
(0.039)
4.0
(0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
66.50 (2.618)
58.87 (2.278)
65.36 (2.573)
.93 (0.036)
3.65
(0.139)
6.72
(0.264)
■ PART NUMBER
FCN-248Q080-L/DS
PLUG, SMT (STRADDLE MOUNT) SCA.2
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/ES
6.72
(0.264)
3.65
(0.139)
.95
(0.039)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
1.27
±0.05
(0.050
±0.001
)
0.9 (0.035)
1.0
(0.039)
4.0
(0.157)
12.0 (0.472)
10.0
(0.393)
12.70 (0.500)
7.0 (0.275)
#1
#41
#40
#80
1.27 (0.050)
1.27 (0.050)
49.53 (1.950)
R 1.6 (0.062)
52.00 (2.047)
R 0.635 (0.025)
66.50 (2.618)
58.87 (2.278)
65.36 (2.573)
61.67
±0.1
(2.427
±0.004
)
0.81
±0.05
(0.031
±0.001
)
0.81
±0.05
(0.031
±0.001
)
49.53
±0.1
(1.950
±0.004
)
58.17
±0.1
(2.290
±0.004
)
4.22
±0.05
(0.166
±0.001
)
1.27
±0.5
(0.050
±0.001
)
1.37
±0.5
(0.053
±0.001
)
3.50
±0.1
(0. 137
±0.004
)
1.52
±0.05
(0. 059
±0.001
)
1.52
±0.05
(0. 059
±0.001
)
3.00
±0.1
(0.118
±0.004
)
3.70
±0.5
(0.145
±0.001
)
1.52
±0.1
(0.059
±0.004
)
0.28
±0.1
(0.011
±0.004
)
R
Recommended
PCB Thickness
1.0 ± 0.1 mm
Unit: mm (in.)
■ DIMENSIONS
P/N FCN-248Q080-L/DS has
been
discontinued
240 Series FC-AL
6
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ PC BOARD LAYOUT
Unit: mm (in.)
0.81
±0.05
(0.032
±0.002
)
0.81
±0.05
(0.032
±0.002
)
24.13
±0.1
(0.95
±0.004
)
36.27
±0.1
(1.428
±0.004
)
1.27
±0.05
(0.05
±0.002
)
4.22
±0.05
(1.66
±0.002
)
3.70
±0.05
(0.146
±0.002
)
2.60
±0.05
(0.102
±0.002
)
0.28
±0.1
(0.011
±0.004
)
1.52
±0.1
(0.60
±0.004
)
3.50
±0.1
(1.38
±0.004
)
1.37
±0.05
(0.054
±0.002
)
R 0.7
(0.028)
#1
#20
1.52
±0.05
(0.60
±0.002
)
1.52
±0.05
(0.60
±0.002
)
#40
#20
#1
#21
41.10 (1.618)
32.47 (1.278)
29.87 (1.176)
25.77 (1.015)
24.13 (0.95)
1.27 (0.05)
20
40
1
21
1.27
±0.3
(0.05
±0.012
)
1.27 (0.05)
24.13
±04
(0.95
±0.016
)
26.60 (1.047)
32.47 (1.278)
39.96
±04
(1.562
±0.016
)
10.0 (0.394)
10.0 (0.394)
1.0 (0.039)
4.0 (0.157)
12.0 (0.472)
12.7 (0.5)
ESD contact
R 0.635(0.25)
R 1.6 (0.63)
6.72
(0.264)
3.65
(0.139)
.95
(0.039)
5.0±0.15
(1.197±0.006)
7.0 (0.276)
PLUG, SMT (STRADDLE MOUNT) FIBER CHANNEL
■ DIMENSIONS
■ PART NUMBER
FCN-248Q040-L/ES
Recommended
PCB Thickness
1.0 ± 0.1 mm
Unit: mm (in.)
248Q Series SCA.2
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ DIMENSIONS
■ PC BOARD LAYOUT
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/FS
Unit: mm (in.)
Insulator
54.2 (2.134)
57.87 (2.278)
66.5 (2.618)
18.2 (0.717)
55.27 (2.176)
49.53 (1.95)
1.27 (0.05)
No.1
5.0
(0.197)
Pos/2+1
66.4(2.614)
Pos/2
Pos
7.0
(0.276)
X
X
50.165 (1.975)
58.765 (2.314)
61.1 (2.406)
64.7 (2.547) Retention leg pitch
To initial point of contact
0.2 A
0.20 (0.008)
0.635
(0.025)
ø1.55
+0
-0.05
ø0.061
+0
)
- 0.002
(
4.3
(0.169)
-A-
2.5
(0.098)
1.5
(0.060)
1 (0.040)
1
(0.040)
2.1
(0.083)
X-X(5/1)
Sect. X-X
8.8(0.346)
8.2(0.322)
6.6 (0.256)
5.9 (0.232)
1.6
(0.063)
2.0
±0.25
(0.079
±0.001
)
To initial point of contact
To initial point of contact
1.85
±0.25
(0.073
±0.001
)
2.2(0.087)
2.96(0.117)
2.65
±0.15
(0.104
±0.006
)
2.65
±0.15
(0.104
±0.006
)
13.8
(0.543)
8.8
(0.346)
Retention Leg
Signal contact
64.7±0.05 (2.547±0.002)
58.765
±0.05 (2.314±0.0002)
0.635 x 79= 50.165
(0.025 x 3.110 = 1.975)
80-0.42
+0
-0.05
(80-0.017
+0
)
- 0.002
0.1 B
No. 80
No. 40
Recommended PC Board
mounting dimensions
Thickness 1.0
±0.1
mm (0.040
±0.004
)
No.41
No. 1
2.65±0.05
(0.104±0.002)
2.65
±0.05
(0.104±0.002)
4-ø1.2
±0.05
(4-ø0.047
±0.002
)
Through hole
2-ø1.6
±0.05
(2-ø0.063
±0.002
)
0.635
(0.025)
4.3
(0.169)
-B-
2.0±0.1
(0.079
±0.004
)
2.2±0.1
(0.0887
±0.004
)
4.7±0.1
(0.185
±0.004
)
SINGLE SIDE SMT SCA.2
240 Series FC-AL
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
SOCKET, VERTICAL MOUNT FIBER CHANNEL
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
Unit: mm (in.)
BWPDEDNEMMOCER
SSENKCIHTSSENKCIHT
SSENKCIHT
SSENKCIHTSSENKCIHT
REBMUNTRAP
TCATNOCLANGIS
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP
)A(HTGNELTSOP)A(HTGNELTSOP
TCATNOCDSE
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP
)B(HTGNELTSOP)B(HTGNELTSOP
mm8.0:TPSC/L-040B442-NCF)470.0(88.1)470.0(88.1
mm6.1:TPSB/L-040B442-NCF)011.0(97.2)601.0(07.2
mm0.2:TPSD/L-040B442-NCF)321.0(21.3)321.0(21.3
mm4.2:TPSE/L-040B442-NCF)421.0(41.3)631.0(54.3
mm2.3:TPSF/L-040B442-NCF)061.0(60.4)861.0(72.4
43.60±0.4 (0.716±0.016)
41.40 (0.630)
37.40 (1.472)
34.40 (1.354)
29.67 (1.090)
26.03 (1.025)
24.13
±0.3 (0.95±0.012)24.13±0.3 (0.95±0.012)
1.27
±0.2
(0.05±0.008)
A
A
31.60 (1.244)
15°
40
20
1
FT
5.30±0.15 (0.209±0.006)
7.10
±0.3 (0.280±0.012)
B
B
34.11±0.4 (1.343±0.016)
24.13±0.4 (0.95±0.016)
1.27
±0.3 (0.05±0.008)
2.70±0.3
(0.106±0.012)
2.79
±0.2
(0.109±0.008)
11.50
±0.3
(0.453±0.012)
9.85
±0.3
(0.388±0.012)
6.50
(0.256)
3.50
(0.138)
ESD contact
1.70 (0.067)
2.20 (0.086)
1.45
(0.057)
#2#1
#21
#22
2.60
±0.1
(0.102
±0.004
)
2.70
±0.1
(0.106
±0.004
)
Ø 0.80
±0.8
(Ø 0.031
±0.003
)
#39
#40
#19
#20
Ø 2.60
±0.1
(Ø 0.102
±0.004
)
1.27 (0.05)
4.99
(0.196)
1.905 (0.075)
0.952 (0.037)
2.20
±0.1
(0.086
±0.004
)
Ø 2.60
±0.1
(Ø 0.102
±0.004
)
34.11(1.343)
240 Series (SCA.2)
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
SOCKET, VERTICAL MOUNT
■ DIMENSIONS
■ PC BOARD MOUNTING PATTERN
Unit: mm (in.)
(A)
(B)
69.00 (2.71)
62.80 (2.47)
59.80 (2.35)
55.07 (2.17)
51.80 (2.039)
49.53 (1.95)
57.00 (2.44)
1.27 (0.05)
5.30 (0.208)
7.10 (0.280)
1.27 (0.05)
49.53 (1.95)
59.51 (2.44)
2.20 (.086)
6.50 (.256)
3.50 (.138)
9.85 (.388)
11.50 (.457)
1.45 (.057)
Electrostatic Discharge
59.51 (2.031)
1.905 (0.075)
0.952 (0.037)
2.20
±0.1
(0.086
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
2.60
±0.1
(0.102
±0.004
)
0.80
±0.1
(0.031
±0.004
)
2.70
±0.1
(0.106
±0.004
)
#79
#80
#41
#1
#2
#39
#40
#42
Unit: mm (in.)
BWPDEDNEMMOCER
SSENKCIHTSSENKCIHT
SSENKCIHT
SSENKCIHTSSENKCIHT
REBMUNTRAP
TCATNOCLANGIS
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP
)A(HTGNELTSOP)A(HTGNELTSOP
TCATNOCDSE
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP
)B(HTGNELTSOP)B(HTGNELTSOP
mm8.0:TPSC/L-080B442-NCF)470.0(88.1)470.0(88.1
mm6.1:TPSB/L-080B442-NCF)011.0(97.2)601.0(07.2
mm0.2:TPSD/L-080B442-NCF)321.0(21.3)321.0(21.3
mm4.2:TPSE/L-080B442-NCF)421.0(41.3)631.0(54.3
mm2.3:TPSF/L-080B442-NCF)061.0(60.4)861.0(72.4
240 Series (SCA.2)
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop-
erty of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
/
