Zanussi ZC540AS IDEAL User manual

Brand: Zanussi

Model: ZC540AS IDEAL

Category: Hobs

Type: User manual

This manual is also suitable for

ZC540AP

INSTRUCTION BOOK

ELECTROGAS COOKER

50x50

Models: ZC 540 AS

ZC 540 AP

ZC 540 GA

ZC 560

CONTENTS

Instructions for the user Instructions for the

Technical Features

Warnings

Description of the appliance

Use of the appliance

Advice for use

Maintenance and clening

What to do if

Guarantee conditions

After Sales Service

Instructions for the installer

Installation

Replacing lightin the oven

Change of gas

How to read the instruction book ?

The symbols bellow will guide you when reading

the instruction book

Safety instructions

Description of operations step by step

Advice and recommendation

Information environment protection

TECHNICAL FEATURES

Free standing Classe 1

Hob Cover

Pan support

Front right

Back right

Front left

Back left

Enamelled

Rapid

Auxiliary

Semirapid

2,3(2,10)kW

0,85(0,70)kW

1,70(1,50)kW

Oven

Over power

Grill (at the models: ZC 540 GA

ZC 560)

Grill power

Light in the oven

Cleaning (at the model: ZC 560)

electric

2200W

electric

1800W

Lamp 15W type E14

catalyse

Accessories

Oven grid

Dripping pan

Roasting tray

Protective screen

Turn spit (at the model: ZC 560)

Dimensions Height

Breadth

Depth

850 mm

500 mm

This appliance complies with the

following EEC Directives : 90/683 ;

73/23 (Low Voltage Directive) and

subsequent modifications, 89/336

(Electromagnetical Compatibility

Directive) and subsequent

modifications, 90/396 (Gas Appliance

Directive) 93/68 (General Directives)

and subsequent modifications.

WARNINGS

It is very important that this instruction book

should be kept safety for future consultation.

If it should be sold or given to another

person, please ensure that the booklet goes

together with it, so that the new owner can

know the functions of the machine and also

be aware of the warnings.

This warnings has been given for your and

others safety.

• This appliance has been designed for

use by adults. Take care therefore, that

children do not attempt to play with it.

• When receiving the appliance, unpack it

on the spot. Check the general aspect of

the appliance. In case you have any

comments write them on the delivery

note and keep one copy.

• Your appliance is intended only for

normal household use. Never use it for

other purposes, as commercial or

industrial.

• It is dangerous to modify, or attempt to

modify, the characteristics of this

appliance.

• On first use, heat the oven empty in

order to eliminate the unpleasant swells

of the thermal insulation of the oven and

residual grease used in manufacturing.

- Lift the cover.

- Remove the accessories in the oven.

- Remove all type of stickers and plastic

protection.

- Heat the oven for about 45 min, knob on

position “ 250”. During this operation the

appliance with smoke, air the kitchen for

eliminating the swells and the smoke. The

accessories too, should be washed before

the first use.

The use of a gas cooking appliance

produces, heat and humidity in the room in

which it is installed. Ensure good ventilation

of the room keeping natural ventilation

openings clear or installing a mechanic

ventilating device.

An intensive and prolonged use of the

cooker could necessitate a supplementary

airing by opening the window, or a more

effective ventilation by increasing the

mechanical device power, if there is.

• In case you use electric appliances near

the cooker (for instance an electric mixer)

the cables should not come into touch

with the hot parts of the cooker or

fastened by the oven door of the cooker.

• Supervise when frying in oil or greys

(chips…), hot greys ran cause fires

easily.

• Unstable or deformed pans should not be

placed on the burners in order to avoid

accidents caused by upsetting or boiling

over.

• Never pule the appliance by the oven

handle. Beside the accessories in the

oven you can use only heat-proof pans

(see instructions of the manufacturers).

• Do not put products for cleaning or

inflammable material in the drawer (if

your cooker has one) or near the cooker.

• On the open oven door never put :

- heavy things,

- ensure that children do not climb up or

sit on it.

• Always use gloves to remove dishes from

oven or when you come close to the hot

elements of the cooker.

• Do not cover the bottom of the appliance

with aluminium foil, over heating causes

damaging of the enamel,

• Never use the dripping pan as roasting

tray,

• In order to avoid damage of knobs do not

have opened the oven door when it works

or it is still hot.

The flame of the burner has to be smooth.

Avoid draught. If the flame is not regular

clean the burner and if the anomaly persists

call your after sales service.

• After use of your gas cooker ensure that a

the knobs are on “Off” position.

• Do not leave anything (cloths, aluminium

foil, etc.) on the hob when using the

burners,

• Always clean the cover before closing,

• When the oven is in use the cover has to

be opened,

• Leave the oven and the hob cool before

closing otherwise the cover could

deteriorate,

• Change the gas supply pipe little before

its expire date, mentioned on it,

• Never use propane bottle (cylinder) in

your kitchen or in a closed room,

• Do not allow children near the cooker

when it is in use, for avoiding touch of

hot surfaces, overturning of pots,

• Ensure that children do not handle the

knobs of the appliance,

• Before cleaning disconnect the

appliance and allow to cool,

• Never use the ignited burners without a

pot on,

• For reasons of good culinary results,

hygiene and safety this appliance must

always be kept clean, the fat sprinklers

could give off unpleasant smells,

• Clean your cooker after each use for

guaranteeing a right functioning,

• Never use steam or high pressure

appliances for cleaning the oven

(exactingness related to electric safety).

Installation

• The work of installation must be carried

out by a qualified installer.

• Any modifications to the domestic

electrical mains which may be necessary

for the installation of the appliance

should be carried out only by qualified

electrician.

• During installation or any intervention,

disconnect the appliance.

• The repairs have to be done only by after

sales qualified services.

• Non conforming repair could cause

serious damage.

• Before using and installing this

appliance, it is important to read carefully

all the instructions.

• Thank you for your attention.

We decline our responsibility for

possible damages resulting from bad

use and non-observing of safety rules in

force. Do observe strictly the cleaning

and maintenance instructions.

Environment protection

All materials marked by the symbol

are

recycling. Store them in places especially

foreseen for this purpose (inform yourself at

the services of your area) for recovery and

recycling.

In case of functioning anomalies it is the

after sales service of your dealer the first to

intervene. In case of moving to another

place, closing of the shop, contact the

nearest Consumers Service (Authorised

Services Center) who will give you the

address of an after sales service.

In case of intervention on your appliance

ask your after sales service only the

spare parts certified by the Manufacturer.

DESCRIPTION OF THE APPLIANCE

Control panel

Models : ZC 540 AS and ZC 540 AP

250

200

150

100

FRONT

LEFT

BURNER

CONTROL

KNOB

BACK

LEFT

BURNER

CONTROL

KNOB

FRONT

RIGHT

BURNER

CONTROL

KNOB

BACK

RIGHT

BURNER

CONTROL

KNOB

OVEN

KNOB

OVEN

PILOT

IGNITION

SWITCH

ZANUSSI

GAS

GAS GASGAS

OVEN

TOP

Models : ZC 540 GA and ZC 560

250

200

150

100

FRONT

LEFT

BURNER

CONTROL

KNOB

BACK

LEFT

BURNER

CONTROL

KNOB

FRONT

RIGHT

BURNER

CONTROL

KNOB

BACK

RIGHT

BURNER

CONTROL

KNOB

OVEN

KNOB

OVEN

PILOT

IGNITION

SWITCH

ZANUSSI

OVEN

GAS

GAS GASGAS

TOP

Hob

semi-rapid

1,7

(

1,5

)

rapid

2,3

(

2,1

)

k W

semi-rapid

1,7

(

1,5

)

k W

auxiliary

(

)

k W

1. Front left burner (semi-rapid)

2. Back left burner (semi-rapid)

3. Back right burner (auxiliary)

4. Front right burner (rapid)

USE OF APPLIANCE

1. Electric traditional oven

Before the first use ensure that

the room is well ventilated:

V.M.C. (Mechanic ventilation) or

opened window.

How to proceed ?

1. Lift the lid

2. Remove the oven accessories

3. Detach the adhesive labels, the foil

protection if there is

4. Heat the oven the corresponding

knob on position “250” for about 45

min.

Clean the accessorie(s) with a soft

detergent. Rinse and dry carefully.

During cooking in the oven the

oven door is hot. Take care that

children do not play near it.

When using the oven the cover

has to be opened to avoid over-

heating.

Use

The oven can be used in traditional cooking

or for grilling, but not simultaneously.

Control knob (fig.1)

It makes possible to choose the most

appropriate temperature and to select the

elements radiating heat one by one.

Explanations of symbols:

Off positions

Oven light

50-250 Temperature selection

Bottom heat

Top heat

Grill (at the models: ZC540 GA

and ZC 560)

To select the temperature turn the knob

clockwise until the pointer indicating the

desires temperature between 50 º–250 ºC.

The temperature will be kept constant by

the thermostat.

If you want more heat coming from the

bottom or more heat coming from the top,

turn the knob so as to place the pointer on

the symbol

(bottom heat) or (top

heat).

Under these circumstances the

temperature will never exceed about

220ºC in the bottom heat

and 180 ºC in

the top heat position

and it will not be

regulated by the thermostat.

Electric grill (at the models: ZC 540 GA

and ZC 560)

When grilling, the accessible parts

of the appliance are hot. Take care that

children do not play near it. While the

grill is in function leave the oven door

half open and put the protective screen

“A” to the knob.

The grill is used for grilling all kind of meat

(pork, beef …) which remain tender, toasts

or frying dishes already cooked.

If you use the grid slide under it, on the

lowest shelf the dripping pan to collect the

juice and fat.

250

200

150

100

fig. 1

fig. 2

For turning off the heating elements.

Turn the knob clockwise to position off“ ”.

2. Cooking in the oven

Traditional cooking

Traditional cooking is made by natural

convection the heated air circulates on the

principle of ascending and descending

draughts.

It is necessary to pre-heat the oven

How to proceed ?

For small cakes, pastry, beaten mixture

cakes in moulds.

1. Preheat the oven the thermostat on

position chosen for cooking:

- about 8 min. for position 50ºC to

150ºC;

- about 15 min for position 175ºC to

250ºC;

2. Insert the meal

Cooking with lower element

This position of the thermostat is

recommended for pizza and fruit pies.

Preheating is necessary.

How to proceed ?

1. Preheat the oven the thermostat on position

for about 10 min.

2.Insert the meal.

Grilling

It is a radiant cooking; it is only the top

element that is heating. This position of the

thermostat is recommended for warning up

the cooked meals.

It is not necessary to preheat the oven.

How to proceed ?

1. Insert the meal on the 3

level.

2. Turn the thermostat on position

fig. 3

fig. 4

fig. 5

Grilling

Heat comes from the top of the oven. It is

suitable for grilling meat (beef bacon, pork

bacon …) that remains tender, for toast or to

brown already cooked.

When using the grill it has to be

supervised, the oven door opened the

protective screen in its place.

Roast meat

• Prepare the meat to be roasted, lightly

brush it with oil on both sides.

• Place it on the grill.

• Fix the protective screen.

• Fix the knob oven grill on position

• Slide the dripping pan in the guide 1

• Slide the pan support grid in the guide 2

or 3 depending on the thickness of the

meat to be roasted.

• Use guide 3 for the thin pieces to be

roasted (toasts, pork bacon, sausage,

small fish…)

• Use guide 2 for thick pieces to be roasted

(beef bacon, large fish, poultry).

• When the first side is brown, turn the

meat without pricking it in order that the

juices are not lost.

• Roast the second side.

• Salt when ending the cooking.

Cooking time has to determined by the

thickness of the piece to be roasted not by its

weight.

Frying

• Fix the protective screen.

• Fix the knob oven / grill on position

• Place the dish on the grid and slide it in

the guide 2 or 3.

• Leave the dish under the radiation of the

grill for a few minutes.

fig. 6

fig. 7

Oven light

It’s lighted once the oven / grill knob is

turned on and lights the oven during its

functioning.

Oven thermostat pilot light

Switches off when the oven reaches

selected temperature and re-lights every

time the thermostat intervenes to stabilize

the temperature.

2. The Hob Burners

To the symbol on the knob corresponds a

symbol on the control panel (fig. 8)

Off

Maximum level

Minimum level

Use the maximum level for boiling and the

minimum for smothering and maintaining

boiling.

Choose always positions between the

minimum and maximum, never between

maximum and off.

fig. 8

Do not close the cover till the plate

is hot, the cover could be damaged.

Ignition of the burners

Approach a flame to the burner after turning

the corresponding knob (lack of power).

1. Push the knob and turn it left to the

symbol “big flame”.

2. In the same time, push the electronic

ignition knob (fig. 9) for obtaining

sparkles. Keep it pushed till turning up of

the flame (1 spark / second).

3. Adjust the flame on desired position.

Extinguishing of burners

Turn the knob clockwise to mark «

». The

safety device is in place.

Do not put on the hob things or food

liable to melt.

fig. 9

How to chose the burner

Above every knob there is a symbol for the

corresponding burner.

For better cooking results, always chose pans

which properly fit to the diameter of the burner

used (fig. 10).

We advise to lower the flame as soon as the

liquid starts boiling.

For a right ignition keep the burner ring and

the sparklers always clean.

Good use

fig. 10

Bad use

(

Power waste

)

3. Accessories delivered with the appliance

Beside the accessories delivered with the

appliance we advise you to use only heat

proof pots (according to the instructions of the

manufacturer).

Your cooker is equipped with:

• a grate, pan support for putting the dishes

on (roast, pastry moulds …)

The dish has to be put in the middle of the

grate to balance the weight.

• a dripping pan.

It is used to collect juice when cooking in it,

place it on the shelf 2.

If you do not use the dripping pan, remove it

from the oven.

• a protective screen

It is used for when using the grill and the turn-

spit (just for the models: ZC 560 and ZC 540

GA)

A turn spit (poz.1 in fig.11 just for the model:

ZC 560) made up of:

- 2 forks

- 1 spit

- 1 handle

- 1 spit support

fig.11

ADVICE FOR USE

Oven cooking

• Turn off your oven 5 minutes before the

foreseen cooking time you will save

power, the accumulated heat will allow

to end cooking;

• The thickness, the conductibility and the

color of pot influences the culinary

results;

• When cooking, certain dishes increase

in volume, choose the pot so that above

the raw mixture remain enough place;

• For preventing fat dripping when

roasting use tall rim pans proportional to

the piece to be roasted;

• Prick the skin of poultry and the

sausage with a fork before cooking to

avoid its blowing up;

• Between the dish and the oven grid

could be put an aluminium foil but not

covering all the grid;

• Use glass heat resisting pans for crispy

and soufflés;

• Add some fat before finishing the

cooking.

Never line any part of the oven with

aluminium foil. It would result in an

accumulation of heat which might

damage the cooking results and also

damage the enamel.

The cover has to be opened when using

the oven.

Influence of the pots on oven cooking

results

You have to know that:

• The aluminium, the terracotta pots

diminish the browning bellow and

maintains the humidity of the meals. We

advice to use it for pastry, roast meat.

• The enameled cast iron, the tinned pots,

the glass and the heat-proof porcelain,

the pots with non-sticky interior and

colored exterior, increase the browning

bellow and dries the meals.

We suggest

to use them for pies and all other crispy

cooking that has to be colored bellow and

above.

Cooking on the hob

Choose always the right pot, proportional to

the burner used.

In case you use a large bottom pot, put it

slight backwards on the plate, so that its

bottom should not outrun the front of the

enameled hob, thus avoiding flame

exceeding and overheating of front panel.

Before covering make sure the hob

is cooled, otherwise the cover could be

damaged.

MAINTENANCE AND CLEANING

Before cleaning, check that the

knobs are on “off” position, that the

appliance has cooled completely and

that it is disconnected.

Never use abrasive powder or wire

sponge for cleaning the appliance.

Burners

Clean the covers with warm water and mild

detergent, remove all crust.

Never use vinegar.

The flame splitters have to be kept clean for

ensuring good ignition.

Before igniting make sure the flame splitter

and the caps are properly replaced.

The assembly has to be perfectly dry.

Self-cleaning oven (just for the model:

ZC 560)

Principle:

The walls of your cooker, except the soil are

protected by special porous enamel. It is

frosted and hard. It absorbs and destroys

the fat splashes when warm.

Maintenance

Sometimes when cooking causes a lot of fat

projections (poultry, roasted meat …), the

time or the temperature are not always

enough for eliminating the fat. In this case,

after cooking remove all the accessories

from the oven (grid, dripping tray), fix the

thermostat on position “250” and leave it

function empty for 45 min, then select

position … for 5 minutes. If you start this

operation from cold oven count 60 minutes

for cleaning.

The soil which is not self cleaning enameled

can be pulled out, if necessary, for dripping.

Anyhow, it has to be cleaned separately,

before starting the self-cleaning, in order to

avoid burning of dirt.

In case of overflow on the soil clean with a

sponge and a mild detergent.

Do not project cleaning products on the

part covered with self-cleaning enamel.

The oven door is hotter the usually,

do not allow children near the appliance.

Control panel, knobs, enameled pan

support, cover, front and side panels

For cleaning them use a wet sponge with a

soft detergent, rinse and dry.

In case of overflowing, wet and leave it

dissolving but do not scratch and avoid use

of abrasive or caustic products that could

damage the enamel.

Wipe immediately the stains of vinegar,

lemon, generally the acid substances.

The porcelain enamel, bright and smooth

has to be cleaned manually.

In case of overflows on the soil, take it out

for cleaning it more easily with a wet sponge

and soft detergent.

The internal oven door glass can be

removed for cleaning. For this purpose draw

out the 2 fixing screws (fig. 12).

fig.12

Cleaning of the accessories.

Clean them with warm water and detergent,

rinse well and dry.

WHAT TO DO IF THE APPLIANCE DOES NOT WORK

If the appliance does not work properly, check the following points before asking for service;

there could be simple problems that you could remedy by yourself; if not, contact your after

sales service.

Symptoms Solutions

No burner ignites

One of the burners does not ignite

Cooking results are not satisfactory

The oven smokes

The electric plate and the oven do not

work

Check that:

• gas supply is completely open;

• the position of gas pipe is right;

• the gas cylinder or the tank is not empty.

Check that:

• the burner is in its right place;

• the burner is not wet.

Check that:

• the thermostat is placed correctly;

• the cooking time is adapted;

• the grill is placed correctly in the oven.

Check that:

• the oven does not need cleaning;

• the meal does not overflow;

• there is no excessive fat / juice projection

on the oven sides.

Check that:

• the appliance is not unplugged;

• there is no power break.

Check the fuses.

Rating Plate

The rating plate is fixed at the back of the appliance. When you call your After Sales Service,

you have to specify the model, the product number and the serial number of the appliance.

All these informations can be read on the rating plate at the back of the appliance.

GUARANTEE CONDITIONS

Guarantee stipulated in the contract

1 year starting from setting into function the

manufacturer will replace the damaged

parts except the cases mentioned in chapter

“Reserves”.

Conditions for applying

For applying this guarantee you have to

direct to the distributor who sold you the

appliance and submit to him your

Guarantee Certificate. The dealer will or will

not overtake the expenses for the labor and

transport in accordance with their sales

conditions.

Reserves:

We draw your attention on the fact that the

guarantee will not be applied:

• if the damages are due to shock ,

abnominal power variation, etc., or non-

observing of the installation and use

conditions stipulated in the Instruction

book, wrong handling, negligence or

wrong, installation non-conforming to the

rules imposed by the power, water, gas

distributor;

• if the user modified the material or took

off the marking or the serial numbers;

• if the person who made the repairing is

not certified by the manufacturer or the

dealer;

• if the appliance was used for

commercial or industrial purpose or

other household purposes than what it

was conceived for;

• if the appliance was bought or repaired

outside cantry territory

AFTER SALES SERVICE

Any repair work that needs to be carried out

should be done with the utmost care and

attention. For this reason we recommend

that for any problem you contact the dealer

who sold it to you.

In case of moving to another place, closing

of the shop, contact the nearest Consumers

Service (Authorized Service Center) who

will give you the address of an After Sales

Service.

In case of intervention on your appliance

ask your after sales service only spare

parts certified by the Manufacturer.

INSTRUCTIONS FOR THE INSTALLER

ADVICE FOR SAFETY

• Before installation ensure that the local

distribution conditions (gas nature and

pressure) and the pre-setting of the

appliance are consistent;

• This appliance must be installed only in

a room with good ventilation;

• The adjusting conditions of this

appliance are mentioned on the rating

plate;

• This appliance is not connected to a flue

gas exhaust device. It has to be

installed and connected in accordance

with the rules in force. Special attention

should be granted to the applicable

disposal concerning ventilation;

• This appliance is of y type, meaning that

the furniture units can exceed its height;

• The neighbouring furniture panels has to

be heat proof or protected by such

material.

Connection to gas main

• Check that the counter flow and the

diameter of piping are enough to supply

all the appliances of the installation

(take counsel with the gas distribution

company);

• Check that all connections are tight;

• Install an accessible and visible barrage

tap;

• If you use a flexible pipe it has to be

easily inspected all along and must not

pass behind the appliance;

• Change the flexible pipe little before its

expire date stamped on it.

Electric connection

Check that:

• the power of the installation is enough;

• the supplying lines are in good

conditions;

• the diameter of the cables complies with

the installation rules;

• the fix installation has a device with

contacts with omnipolar switch with a

minimum opening between contacts of

minimum3 mm.

Installation and maintenance have to be

made by a qualified person in accordance

with the regulations in force, which are:

 Decision of 2

August 1977

Technical and Safety Rules to be applied to

fuel gas and liquefied hydrocarburs in the

buildings.

 Standard DTU 45-204

Gas Installation (former DTU no. 61-1 – Gas

Installation, April 1982 + annex no. 1 July

1984).

 Departmental Sanitary Regulation.

 Standard NF C 15-100 – Low Tension

Electric Installation.

We deny any responsibility in cases of

accidents or incidents caused lack of

grounding or missgrounding.

INSTALLATION

Placement

Remove the plastic packaging and install

the cooker in a dry, ventilated room (fig. 13)

not near curtains, paper, alcohol, petrol,

etc…)

The appliance has to be set on a heatproof

soil.

This appliance belongs to class “1” in

matters of protection against overheating of

surrounding surfaces.

It is mandatory to keep 2cm distance to the

furniture walls.

The furniture cannot be taller then the

cooker hot plate.

Ventilation

Gas combustion is possible due to the

oxygen in the air (2 m

air/h x Kw installed

power – check the rating panel of the

cooker).

It is necessary to renew the air and that the

combustion products be discharged.

The air flow must come directly through

openings of external walls having a free

passage of at least 100 cm

These openings should be realized

preferably positioned near the floor,

opposite the combustion products

discharge. It should not be occluded both

from inside and outside.

2 cm

59 cm

fig. 13

Gas connection

Your cooker is delivered adjusted for the

kind of gas stated on the rating plate.

It might be necessary to pass to another

kind of gas, different to the one it is preset

to. Under these circumstances follow the

instructions bellow.

For best efficiency, lowest

consumption and a longer length of life of

your cooker, the manifold gas pressure has

to respect the values shown in table no. 1

If the appliance is supplied with GZ 50, GZ

35 or GPB gas check that from the pressure

regulator, the pressure for GZ 50 is 20

mbar, for GZ 35 is 13mbar and for GPB is

36 mbar.

Connection using a rigid pipe or a

flexible pipe (class 1).

1. For network gas:

Flexible, nonmetal pipe

• Use a flexible rubber pipe non longer

than 1,5 m and inner diameter of 15 mm

mounted with its holder

• Make sure it is well inserted and fix it by

means of a collar.

Flexible pipe

• Flexible pipe (mechanic connection)

max length 1.5 m;

• We advice to use a flexible pipe,

according to the national rule in force,

not shorter than 1 m, depending on the

position of the tap;

• Connect one end of the pipe to the

blocking tap, than, before placing the

appliance between the furniture,

connect the other end to the pipe

extension, inserting a gasket.

Fitting

Necklace

Connection

gas

Pipe

flexible

Pipe

flexible

Pipe

flexible

• Place the cooker checking that the loop

made by the flexible pipe develops in

the sanitary empty of the furniture.

Rigid pipe

• Rigid pipe with screw nut

2. For cylinder butane propane gas:

• We advise you to use flexible pipe

according to the national rule in force of

minimum 1 m; this length is chosen

depending on the position of the

connection to the gas supply;

• For the old butane installations you can

use a flexible rubber pipe of max 1,5 m

and 6 mm diameter, mounted with the

special butane holder ;

• Fix it well by means of a collar for each

end.

For buying the pipe

• Flexible rubber hose: it has to be

marked NF GAS

• Flexible pipe: according to standard NF

D 36 121, or NF D 103, or NF D 36 107

Fitting

Necklace

Holder

butane

Flexible

rubber

Electrical connection

Important

In any connection way the appliance

has to be grounded, in accordance with

the national rules in force and with

standard NFC 15 100. We decline any

responsibility in case of accidents due to

no grounding or wrong grounding.

Fuse capacity: 16A

Note:

Check on the rating plate the value for the

total connection power for establishing the

fuse power.

In case of a direct connection to the mains

you have to interpose an omnipolar switch a

minimum opening between contacts of 3

mm.

The yellow-green grounding cable has not

to be interrupted by the switch.

The supply cord must be positioned in such

a way as it does not reach in any point a

temperature higher by 50ºC than the room

temperature.

Before connecting check that:

• fuse and household electric installation

can bear the charge of the appliance

(see rating plate);

• The socket or the omnipolar switch used

for connection is easily reachable when

the appliance is installed.

How to proceed?

• Unscrew and remove the protective

cover at the back of the appliance;

• Connect the power cord to the terminal

of the cooker according to the table

no.1;

• Fix by means of cable clamp;

• Make sure that the connection to the

terminal is matching the network power;

• Remount and screw the protective cover

at the back of the appliance.

Page is loading ...

Zanussi ZC540AS IDEAL User manual

Brand: Zanussi

Model: ZC540AS IDEAL

Category: Hobs

Type: User manual

This manual is also suitable for

ZC540AP

Download PDF

report

Zanussi ZC540AS IDEAL User manual

This manual is also suitable for

Zanussi ZC540AS IDEAL User manual

Related papers

Other documents