ESAB Cut Master 39 Troubleshooting instruction

TECHNICAL

BULLETIN

Date: 12/17/2007

Product: Cut Master 39 By: Scott Ackerman /Jorge Santana

Subject: Cut Master 39 Operating Manual

Summary: Miss-print Section 3.03

THERMAL DYNAMICS TECHNICAL SUPPORT

Phone: 1-800-752-7622

Fax: 1-603-298-7402

tdc-tech@thermadyne.com

www.thermadyne.com

Form 0005

82 Benning Street

West Lebanon, NH 03784

1-603-298-5711

Fax: 1-800-221-4401

“Exceeding Customer Expectations Through Performance Excellence"

Valued Thermadyne Customer,

From Mid June to July 15, 2008 we shipped Cut Master 39’s with incorrect information in the Operating Manual

Section 3.03.

The Power adaptor cords shown in this manual are not available at this time, please disregard this information.

We do apologize for the confusion and inconvenience on this matter.

Please do not hesitate to contact us if you have any questions.

For More information Contact: