ESAB Swivel Post Accessory Troubleshooting instruction

Brand: ESAB

Model: Swivel Post Accessory

Type: Troubleshooting instruction

INSTRUCTIONS for

F15-283-A

September, 2002

SWIVEL POST ACCESSORY

Item No. 36172

For ESAB Power Sources with thread in Lifting Eyes

The insulated swivel post accessory permits

mounting select ESAB wire feeders directly to

the top of the welding power source. It allows

the wire feeder to rotate freely, increasing the

working area of the torch and minimizing potential

wire feed problems. The swivel post accessory may

be fitted to any model ESAB power source

equipped with a thread in style lifting eye. ESAB

wire feeders suitable for use with this accessory

are equipped with a vertical tube in the base to

accept this accessory.

To install the Swivel Post:

1. Remove the lifting eye bolt, if already installed,

from the top center of the power source.

2. Install the Swivel Post in place of the lifting eye

bolt and turn it in until hand tight.

3. Insert a suitable 1/4 in. rod through the hole of the

post and tighten the Swivel Post firmly.

4. Mount the Wire Feeder onto the Swivel Post

5. Dress all cables and hoses to permit free rotation

of the wire feeder on the swivel post. Check that

the cable bundle does not contact sharp edges

or corners as the feeder is rotated in normal use.

Swivel Post

Accessory

Typical Power Source

with thread in

lifting eye

IF YOU DO NOT KNOW WHOM TO CALL

Telephone: (800) ESAB-123/ Fax: (843) 664-4452/ Web:http://www.esab.com

Hours: 7:30 AM to 5:00 PM EST

A. CUSTOMER SERVICE QUESTIONS:

Order Entry Product Availability Pricing Delivery

Order Changes Saleable Goods Returns Shipping Information

Eastern Distribution Center

Telephone: (800)362-7080 / Fax: (800) 634-7548

Central Distribution Center

Telephone: (800)783-5360 / Fax: (800) 783-5362

Western Distribution Center

Telephone: (800) 235-4012/ Fax: (888) 586-4670

B. ENGINEERING SERVICE: Telephone: (843) 664-4416 / Fax : (800) 446-5693

Welding Equipment Troubleshooting Hours: 7:30 AM to 5:00 PM EST

Warranty Returns Authorized Repair Stations

C. TECHNICAL SERVICE: Telephone: (800) ESAB-123/ Fax: (843) 664-4452

Part Numbers Technical Applications Hours: 8:00 AM to 5:00 PM EST

Performance Features Technical Specifications Equipment Recommendations

D. LITERATURE REQUESTS: Telephone: (843) 664-5562 / Fax: (843) 664-5548

Hours: 7:30 AM to 4:00 PM EST

E. WELDING EQUIPMENT REPAIRS: Telephone: (843) 664-4487 / Fax: (843) 664-5557

Repair Estimates Repair Status Hours: 7:30 AM to 3:30 PM EST

F. WELDING EQUIPMENT TRAINING:

Telephone: (843)664-4428 / Fax: (843) 679-5864

Training School Information and Registrations Hours: 7:30 AM to 4:00 PM EST

G. WELDING PROCESS ASSISTANCE:

Telephone: (800) ESAB-123 / Fax: (843) 664-4454 Hours: 7:30 AM to 4:00 PM EST

H. TECHNICAL ASST. CONSUMABLES:

Telephone : (800) 933-7070 Hours: 7:30 AM to 5:00 PM EST

ESAB Welding & Cutting Products, Florence, SC Welding Equipment

COMMUNICATION GUIDE - CUSTOMER SERVICES

F15-283-A 9/2002

ESAB Swivel Post Accessory Troubleshooting instruction

ESAB Swivel Post Accessory Troubleshooting instruction

ESAB Swivel Post Accessory Troubleshooting instruction

Related papers

Other documents