Installation Guide
Gas detection PC Tool for configuration of Basic, Premium,
Heavy Duty and Controller Expansion modules
148R9640
148R9640
© Danfoss | DCS (MWA) | 2018.04
DKRCI.PI.S00.M2.02 | 520H12754 | 1
Sensor
Danfoss
148H151_02-2018
Service
Tool
Power/
Main Bus
Expansion Module
+
-
F_Bus_A
AI_01
AI_02
AI_03
AI_04
AO_03
AO_04
X10
X2X1 X2
X11
X12
7
1
13410
46
28
2
14
4
511
578910 11 12
39
3
15
3
612
< 24 VDC
<
0 VDC
12
Field Bus
Power
Analog
output
1
2 3 4
Analog
input
560 R
F_Bus_B
24 VDC
0 VDC
Danfoss
148H148_02-2018
Digital output
D1 D2 D3 D4
o
o
o
o
Service Tool
12 4
Ackn. -/Test
button T1
X4
3
4
X8
X2
5
X9
Service Tool
X1
Analog Output
Status LED
Green/Yellow/Red
GND
JP4*
Open: 4-20mA
Closed: 2-10V AO_01
Jumper
J1
J2
J3
Danf
oss
148H149_02-2018
o
o
o
o
X12
4
1
3
2
24 V DC
GND
NC
Service Tool
X1
3
X13
567
Digital
Output
132
NC
GND
Horn
Flash ligh
t
open: 4-20mA
closed: 2-10 V
1
X2
X3
1
X4
JP2*
23
3
2
Status LED
Green/Yellow/Red
Relay status
LED Green
Relay status
LED Green
Relay status
LED Green
321
2
1
Ackn./Test
button
X11
Power Bus Comm.
Danf
oss
148H150_02-2018
o
o
o
o
o
o
o
o
1
USB to PC →
2
Danf
oss
148H153_02-2018
Adapter
1. Plug-in Service tool plug
2. Plug-in USB to Computer
3. Allow Software installation
(see section Installation)
Basic Premium
Heavy Duty Controller expansion module
© Danfoss | DCS (MWA) | 2018.04
DKRCI.PI.S00.M2.02 | 520H12754 | 2
Further documentation:
Software features:
• Addressing of the Basic, Premium and Heavy Duty devices
• Calibration of the Basic, Premium and Heavy Duty devices
• Configuration of application parameters of the Basic, Premium
and Heavy Duty devices
• Monitoring of all measuring values at a glance, live
• Printing of calibration report
Installation:
Connect to your PC via the USB cable on the PC tool.
Once connected, it will automatically ask you to start the
installation of the driver for the USB-RS485 adapter.
ENGLISH
A virtual COM port will be generated and this new port number is
required later for configuring the PCTool Software.
The PCTool is approved for the following Windows versions:
WINDOWS 7, 8 & 10.
For connection to the GD controller unit, the PC tool includes a
modular connector adapter.
To access the PC tool user guide, please go to further
documentation.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Danfoss 148H6030 Installation guide
-
-
Danfoss Gas Detection Unit (GDU) Basic + AC (100-240 V) - GDA, GDC, GDHC, GDHF, GDH Installation guide
-
-
Danfoss 148R9637 Installation guide
-
-
-
-
-
Danfoss VLT AQUA Drive FC 202 Operating instructions
