Danfoss 148H6000 Installation guide

Type
Installation guide
Installation Guide
Gas detection PC Tool for configuration of Basic, Premium,
Heavy Duty and Controller Expansion modules
148R9640
148R9640
© Danfoss | DCS (MWA) | 2018.04
DKRCI.PI.S00.M2.02 | 520H12754 | 1
Sensor
Danfoss
148H151_02-2018
Service
Tool
Power/
Main Bus
Expansion Module
+
-
F_Bus_A
AI_01
AI_02
AI_03
AI_04
AO_03
AO_04
X10
X2X1 X2
X11
X12
7
1
13410
46
28
2
14
4
511
578910 11 12
39
3
15
3
612
< 24 VDC
<
0 VDC
12
Field Bus
Power
Analog
output
1
2 3 4
Analog
input
560 R
F_Bus_B
24 VDC
0 VDC
Danfoss
148H148_02-2018
Digital output
D1 D2 D3 D4
o
o
o
o
Service Tool
12 4
Ackn. -/Test
button T1
X4
3
4
X8
X2
5
X9
Service Tool
X1
Analog Output
Status LED
Green/Yellow/Red
GND
JP4*
Open: 4-20mA
Closed: 2-10V AO_01
Jumper
J1
J2
J3
Danf
oss
148H149_02-2018
o
o
o
o
X12
4
1
3
2
24 V DC
GND
NC
Service Tool
X1
3
X13
567
Digital
Output
132
NC
GND
Horn
Flash ligh
t
open: 4-20mA
closed: 2-10 V
1
X2
X3
1
X4
JP2*
23
3
2
Status LED
Green/Yellow/Red
Relay status
LED Green
Relay status
LED Green
Relay status
LED Green
321
2
1
Ackn./Test
button
X11
Power Bus Comm.
Danf
oss
148H150_02-2018
o
o
o
o
o
o
o
o
1
USB to PC
2
Danf
oss
148H153_02-2018
Adapter
1. Plug-in Service tool plug
2. Plug-in USB to Computer
3. Allow Software installation
(see section Installation)
Basic Premium
Heavy Duty Controller expansion module
© Danfoss | DCS (MWA) | 2018.04
DKRCI.PI.S00.M2.02 | 520H12754 | 2
Further documentation:
Software features:
Addressing of the Basic, Premium and Heavy Duty devices
Calibration of the Basic, Premium and Heavy Duty devices
Configuration of application parameters of the Basic, Premium
and Heavy Duty devices
Monitoring of all measuring values at a glance, live
Printing of calibration report
Installation:
Connect to your PC via the USB cable on the PC tool.
Once connected, it will automatically ask you to start the
installation of the driver for the USB-RS485 adapter.
ENGLISH
A virtual COM port will be generated and this new port number is
required later for configuring the PCTool Software.
The PCTool is approved for the following Windows versions:
WINDOWS 7, 8 & 10.
For connection to the GD controller unit, the PC tool includes a
modular connector adapter.
To access the PC tool user guide, please go to further
documentation.
  • Page 1 1
  • Page 2 2

Danfoss 148H6000 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI