Maxview MXL008 Operating instructions

Maxview
Brand
Maxview
Model
MXL008
Type
Operating instructions
Made in China. Maxview reserves the right to change specifications without prior notice.
Contact
Helpline: +44 (0) 1553 811000
Email: support@maxview.co.uk
Web: www.maxview.co.uk
Unique and Innovative Features:
12/24V Power
Powered by a 12/24V supply using the fused power cable provided,
ideal for mobile vehicles
Variable Gain Control
Variable gain from 0-19dB allows the user to adjust gain for high
or low signal areas
Twin Output
Allows the boosted signal to be supplied to two locations without
compromising signal quality
Surface Mounting
Features fixing slots for flat surface mounting
LTE/4G Compatible
Designed to filter out LTE band to ensure maximum DTT reception in
4G signal areas
Additional Features:
LED power indicator
Ideal for weaker signal areas
High quality, durable and robust construction
1 year guarantee
Specifications:
Application: Any mobile vehicle including motorhomes,
caravans, RV’s, HGV’s and marine
Compatibility: Digital TV and FM/DAB radio (47-790 MHz)
Housing: UV stable injection moulded ABS plastic
Frequency Range: Wideband for UHF TV and VHF radio
Power Requirement: 12/24V D.C
Power Consumption: Low (50mA)
Inputs/Outputs: 1/2
Connector Type: ‘F’
Variable Gain: 0-19dB
Noise: 3.5dB
Fault Finding
No picture on TV:
> Check booster LED is on
> Check coaxial cable connections
> Adjust gain on booster
> TV or set top box not tuned in
> Poor reception area
Power LED does not illuminate when power is switched on:
> No power, check other devices on same electrical circuit
> Fuse has blown
Picture breaks up or freezes:
> Adjust gain on booster
> Poor reception
Safety Warnings
> This booster is only suitable for vehicles with a negative chassis earth
> Disconnect battery before starting installation
> To avoid injury always route cables or wiring carefully
> Always follow manufacturer’s operating and safety instructions before
using tools and/or equipment
> Do not install appliance where it could be exposed to water or moisture
> For indoor use only
> If in doubt consult a qualified electrician or professional aerial installer
Wall Mounting Option
Fitting ‘F’ Connector
Operation
1. Switch power on. The LED indicator should now be on
2. Turn the gain control knob clockwise to increase signal strength
Connections & Features
Aerial
Output 2
Aerial
Input
Aerial
Output 1
O I
OUT OUT
IN
12/24V
Power
Input
On/Off
O I
Gain
Control
Knob
LED
Power
Indicator
  • Page 1 1

Maxview MXL008 Operating instructions

Maxview
Brand
Maxview
Model
MXL008
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents