R82 Gazelle PS Mounting Guide

Brand
R82
Model
Gazelle PS
Type
Mounting Guide

R82 Gazelle PS is a versatile and adjustable height and angle work surface. It can be used in a variety of positions to accommodate different user needs and preferences. The tray can be mounted in four positions: prone low, prone high, supine low, and supine high. The height and angle of the tray can also be adjusted to provide optimal comfort and support. Additionally, the tray can be equipped with a bowl, which can be used for a variety of purposes, such as eating, drinking, or playing. The tray is also easy to clean and disinfect, making it ideal for use in healthcare settings.

R82 Gazelle PS is a versatile and adjustable height and angle work surface. It can be used in a variety of positions to accommodate different user needs and preferences. The tray can be mounted in four positions: prone low, prone high, supine low, and supine high. The height and angle of the tray can also be adjusted to provide optimal comfort and support. Additionally, the tray can be equipped with a bowl, which can be used for a variety of purposes, such as eating, drinking, or playing. The tray is also easy to clean and disinfect, making it ideal for use in healthcare settings.

Monteringsvejledning (DK)
Montering af bord med balje
Mounting instruction (GB)
Mounting tray with bowl
Rev. 02 - 02.2016
9996097119
Monteringsveiledning (N)
Montering av bord med balje
Montage-handleiding (NL)
Werkblad met speelbox
Instructions de montage (FR)
Tablette avec cuvette
Návod k montáži (CZ)
Montáž tácu s miskou
Montageanweisung (D)
Montage Tisch mit Becken
Monteringsanvisning (SV)
Montering av bord i plast med leklåda och bricka
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
A
B
C
D
E
E
F
G
Mounting instruction
Mounting tray with bowl - 1/3
The tray can be mounted in 4 positions - prone low, prone high, supine low and
supine high.
At mounting use the enclosed 5 mm Allen key.
* The handles (A) are loosened completely, and the tray bracket (B) is placed in
the two tubes (C) on the back of Gazelle PS. Fasten the handles (A) again. Al-
ways place the tray bracket in a position where the long ends on the horizontal
tubes (D) turn towards the user.
* The bolts (E) are loosened in both sides, the tray bars are put in position for prone
or supine mounting as shown on drawings below. The bolts (E) are fastened
loosely.
* Handles (F) on both sides are loosened, the tray bars are mounted in the ho-
rizontal tubes and handles (F) are fastened again. The bolts (E) are fastened
completely with Allen key when the desired position has been achieved.
* Loosen handles (A) to adjust the height of the tray. Loosen handle (G) to adjust
the angle of the tray (the handle (G) should never be removed completely as
the parts can be hard to assemble again).
PRONE
SUPINE
I
F
F
G
G
H
H
I
J
J
* The tray can be adjusted in two positions - high and low. To do this remove bolt, washers and nut (G) in both sides, the handle
(F) is loosened a little (is not to be removed completely), and the bracket (H) is turned 180 degrees. Bolt, washers and nut are
mounted at the other end of the bracket (I).
* The bracket can be covered by the enclosed fabric hood (J).
Mounting instruction
Mounting tray with bowl - 2/3
High Low
E
F
H
I
E
D
D
D
D
Mounting instruction
Mounting tray with bowl - 3/3
Below please find the various possibilities for mounting of the tray. Please note that the horizontal tubes
(D) always should be placed in a position where the long ends turn towards the user.
PRONE low
PRONE high
SUPINE low
SUPINE high
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

R82 Gazelle PS Mounting Guide

Brand
R82
Model
Gazelle PS
Type
Mounting Guide

R82 Gazelle PS is a versatile and adjustable height and angle work surface. It can be used in a variety of positions to accommodate different user needs and preferences. The tray can be mounted in four positions: prone low, prone high, supine low, and supine high. The height and angle of the tray can also be adjusted to provide optimal comfort and support. Additionally, the tray can be equipped with a bowl, which can be used for a variety of purposes, such as eating, drinking, or playing. The tray is also easy to clean and disinfect, making it ideal for use in healthcare settings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents