BDI 6416 User manual

Type
User manual

This manual is also suitable for

BDI Centro 6416 is a lateral file cabinet designed for indoor use on level floors. It is engineered for easy assembly and can be used to store letter and legal files. The cabinet features two drawers, each with a pull for easy opening. The drawers can be fitted with file bars to accommodate different file sizes and orientations. The cabinet also has a glass panel on the front, which allows you to see the contents of the drawers without opening them.

Here are some of the key features of the BDI Centro 6416:

  • Two drawers for storing letter and legal files
  • File bars can be installed to accommodate different file sizes and orientations

BDI Centro 6416 is a lateral file cabinet designed for indoor use on level floors. It is engineered for easy assembly and can be used to store letter and legal files. The cabinet features two drawers, each with a pull for easy opening. The drawers can be fitted with file bars to accommodate different file sizes and orientations. The cabinet also has a glass panel on the front, which allows you to see the contents of the drawers without opening them.

Here are some of the key features of the BDI Centro 6416:

  • Two drawers for storing letter and legal files
  • File bars can be installed to accommodate different file sizes and orientations
1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.16.2016 V1
C1 Glass Panel x 1
A1 Cabinet x 1
C3 Base x 2
H1 1/4-20 x 15mm
Screw x 16
H2 M4 x 37mm
Screw x 4
T1 4mm Hex Wrench
C6 File Bar Clip x 8
C2 Pull x 2
C4 Small File Bar x 4
H3 1/4-20 x 19mm
Screw x 3
C5 Large File Bar x 2
H4 Bumper x 2
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Centro
Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a moist
cloth.
Your Centro
Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
bdiusa.com
customerservic[email protected]om
CENTRO
TM
6416
LATERAL FILE CABINET
Tool Required:
Phillips screwdriver
bdiusa.com
customerservic[email protected]om
CENTRO 6416
LATERAL FILE CABINET
2
Step 2 - Install Base
Attach Base to Cabinet using Screws H1 and tighten with Hex Wrench.
Step 3 - Adhere Bumpers H4 as shown.
Step 4 - Place Glass Panel onto cabinet. Open top drawer halfway in order to attach glass panel from below.
Attach Glass Panel with Screws H3 using Hex Wrench.
H4 (x2)
H3 (x3)
H1 (x16)
bdiusa.com
customerservic[email protected]om
CENTRO 6416
LATERAL FILE CABINET
3
Step 5 - Install Drawer Pulls
Attach Pulls to Cabinet using Screws H2 and tighten with a Phillips screwdriver.
C6
C4
Inner Notch
(Legal File)
Outer Notch
(Letter File)
Step 6 - File Bar Installation (Option A)
For letter and legal files facing forward, attach File Bar Clip C6 to both ends of Small File Bar C4 as shown.
For letter files, use the outer notches on the front and back of the drawer. For legal files, use the inner notches.
H2 (x4)
bdiusa.com
customerservic[email protected]om
CENTRO 6416
LATERAL FILE CABINET
4
Step 7 - File Bar Installation (Option B)
For letter files facing sideways, attach File Bar Clip C6 to both ends of Large File Bar C5 as shown. Place
the file bar assembly in the notches located on the left and right drawer side panels. For side facing legal files,
skip this step altogether. Repeat this step for second file drawer below.
C5
C6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

BDI 6416 User manual

Type
User manual
This manual is also suitable for

BDI Centro 6416 is a lateral file cabinet designed for indoor use on level floors. It is engineered for easy assembly and can be used to store letter and legal files. The cabinet features two drawers, each with a pull for easy opening. The drawers can be fitted with file bars to accommodate different file sizes and orientations. The cabinet also has a glass panel on the front, which allows you to see the contents of the drawers without opening them.

Here are some of the key features of the BDI Centro 6416:

  • Two drawers for storing letter and legal files
  • File bars can be installed to accommodate different file sizes and orientations

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI