Page is loading ...
P.O. Box 455, Leeds, AL 35094-0455
Phone: 205-699-2411
Fax 205-699-7603
NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the
right to change design and specifications without notice.
©
Copyright 2003 Hubbell/Anderson
Manual M-8008
(9/98)
SERVICE AND
OPERATION
MANUAL
MODELS VC6-FTR & VC7-FTR
HYDRAULIC REMOTE TOOL HEADS
Manual M-8008
(9/98)
®
ANDERSON
POWER SYSTEMS, INC.
®
ANDERSON
POWER SYSTEMS, INC.
TABLE OF CONTENTS
Crimping Instructions ...............................................................................1
Care of Hydraulic Tools ............................................................................2
Periodic Maintenance...............................................................................3
Work Tools and Supplies..........................................................................3
Instructions for Returning Tools................................................................3
Conductor Preparation .............................................................................4
Installation of Sleeve Connectors.............................................................4
Installation of Open Groove Connectors ..................................................4
Tool Head Disassembly............................................................................5
Tool Head Assembly.................................................................................5
Disassembly of Piston from Ram Unit......................................................5
Assembly of Piston to Ram Unit...............................................................6
Removal of Retraction Spring Assembly..................................................6
Installation of Retraction Spring Assembly...............................................6
Warranty...................................................................................................7
Troubleshooting .......................................................................................8
Parts List ..................................................................................................9
Parts List ................................................................................................10
Exploded View Drawing ......................................................................... 11
1
2 3
4 5
6 7
WARRANTY: This tool is warranted for two (2) years from date of
purchase. Proof of purchase date is required for warranty claims.
Obvious misuse or abuse voids warranty. The use of this tool in a
manufacturing process renders this warranty null and void.
8 9
10 11
/
