2. Swiss Madison
  3. SM-CH01B

Swiss Madison SM-CH01B, SM-CH01BSM-CH01B, SM-CH04BSM-CH04B Installation guide

  • Hello! I've reviewed the Installation Instructions for Swiss Madison toilet hardware. This document provides a clear guide for both flush and seat hardware installation, including instructions on removing old parts and installing new ones. I'm ready to answer any questions you have about the installation process or the included parts.
  • What should I do before installation?
    How do I remove the old flush hardware?
    How do I install the new flush hardware?
    How do I remove the old seat hardware?
    How do I install the new seat hardware?
1. Remove Old Hardware
· Unscrew plastic locking nut. Then pull down on the base
plate and remove the push button from the tank lid.
2. Install New Hardware
· Insert the push button to the top of the tank lid, slide on
the base plate, and screw the plastic locking nut in place.
Swiss Madison
®
INSTALLATION INSTRUCTIONS
Toilet Hardware
swissmadison.com | 1-434-MADISON | [email protected]
Prior to Installation:
· Inspect product to ensure no damages have
occurred while in shipping.
· The step-by-step guidelines in the installation instructions
are a general reference.
· Read installation and maintenance instructions thoroughly
before installing. Be sure to use proper tools and always wear
proper personal safety accessories for your protection.
Included Parts:
· Seat Hardware
· Flush Hardware
· Installation Bolts
If you have any questions or concerns please contact us:
1-434-623-4766
[email protected]
Flush Hardware Installation:
1. Remove Old Hardware
· Push the quick release buttons on your toilet seat and
pull up to remove the seat. Remove old cover caps.
2. Install New Hardware
· Replace old cover caps with new cover caps.
· Align the seat to the hinges and reattach the seat to the bowl.
Seat Hardware Installation:
/