Seyeon FW-5470 User manual
- Category
- Video switches
- Type
- User manual
This manual is also suitable for
FW-5470 User’s Manual Part 1
4034 ２ Seyeon Tech Co., Ltd
Contents
1. Product Overview ........................................................................................................................2
1.1. FW-5470 ..............................................................................................................................2
1.2. Key Functions of FW-5470 ..................................................................................................2
1.3. Technical Specification of FW-5470 ....................................................................................3
1.4. Packing List ..........................................................................................................................5
2. Hardware Desription ....................................................................................................................6
2.1. FW-5470 Front Panel View ..................................................................................................6
2.2. FW-5470 Rear Panel View ..................................................................................................7
2.2.1. COM Port Description ..................................................................................................8
3. FW-5470 HW installation and basic settings ...............................................................................9
3.1. Before installation, ................................................................................................................9
3.2. Factory Default Condition .....................................................................................................9
3.3. FW-5470 Hardware installation ............................................................................................9
3.4. FW-5470 Rack Mount-kit installation .................................................................................10
3.4.1. Packing List of Rack Mount-kit ...................................................................................10
3.4.2. Installation procedure .................................................................................................11
FW5470 User’s Manual Part 1
4034 1 Seyeon Tech Co., Ltd
Notice
•The materials in this document are for information use only and are subject to change without notice. While
reasonable efforts have been made in the preparation of this document, to assure its accuracy, Seyeon Tech.
assumes no liability resulting from errors or omissions in this document; or from the use of the information
contained herein.
•Seyeon Tech. reserves the rights to make changes in the product design without reservation and without
notification to its users.
Copyright
Copyright -2010 Seyeon Tech Co., Ltd. All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent of Seyeon Tech Co., Ltd.
Copyright -2008 Seyeon Tech Co., Ltd.
810-12 Yeok Sam-dong, Kang Nam-gu, SEOUL, 135-081, KOREA
TEL : 82 2 3017 0855 / FAX : 82 2 3017 0843
URL : http://www.flexwatch.com
Warning
To prevent risk of electric shock, do not remove the system-case. Any repair or modifications for the product
will be allowed by qualified service personals only. Do not expose this appliance to water or moisture. Do not
install this product in hazardous areas where highly combustible or explosive products are stored or used.
Important Information
• Before installation, please read and observe all instructions and warnings contained in this manual. Retain
this manual with the original receipt for future reference and warranty.
• If any items are missing from the package when you open the box, Please DO NOT install or OPERATE
the FlexWATCH® server. Contact the local Dealer or Distributor.
• Please record the following information for technical support and the track record in case of any theft or
loss. Serial Number can be found on the underside of FlexWATCH® server.
Warranty
• 2 year Limited.
• Product : Network Video Recorder
• Model Name : FW-5470
• Serial Number : _00-30-6F- - - _
• Purchase Date : __________________ (yy/mm/dd)
FW-5470 User’s Manual Part 1
4034 2 Seyeon Tech Co., Ltd
1. Product Overview
1.1. FW-5470
FlexWATCH® 5470 is a stand-alone, hybrid network Digital Video Recorder & server that provides full
feature of video server and recorder.
FlexWATCH® 5470 provides complete Triplex mode (Live video transmission, on-site video recording
and remote playback). It provides simultaneous recording and remote access to live views and playback of
recorded images from up to 12ch FlexWATCH IP camera or video servers, and 4ch analog cameras.
Picture 1 : FW-5470
1.2. Key Functions of FW-5470
Standalone device built-in web server
10M/100M/1000M Auto Sensing Ethernet
1CH V-out for QUAD display on analog monitor
Max 120 fps transmission speed on TCP/IP network
Effective Bandwidth & Bit-rate Control by H.264
Built-in 2 way Audio transmission, recording, playback (4ch A-in, 1 A-out)
Supports Watermark
Encryption function by user authentication
Image transmission function via FTP, Email
Supports up to 2TB HDD, Anti-Vibration
Supports Various PTZ (Pan/Tilt/Zoom) Devices
Supports Sensor Input, Digital Output
Supports Dynamic IP users by IPCCTVDNS server
FW-5470 User’s Manual Part 1
4034 3 Seyeon Tech Co., Ltd
1.3. Technical Specification of FW-5470
Model Name
FW-5470
Hardware
32bit Embedded CPU
Flash 8Mbytes /SDRAM: 128Mbytes
Linux version 2.6.24 operating system
Battery backed up real-time clock
Video compression
Motion JPEG, H.264
Resolution
NTSC: 704x480,704x240,352x240,176x112
PAL: 704x576,704x288,352x288,176x144
Frame rate
(each channel)
Motion JPEG: Up to
30/25 fps at D1 / [30/25 x 4=120/100]
H.264: Up to
30/25 fps at D1 / [30/25 x 4=120/100
Video Streaming
Selectable Dual Streaming
Motion JPEG and H.264
Controllable frame rate and bandwidth
Image setting
Compression levels: 1 (Motion JPEG) / 6 (H.264)
Color: color, black & white
Recording
2 Step frame rate
(Fast on event/Slow on continuous recording mode)
Supports Linux File system.
Supports up to 2TB HDD by 1 SATA
Anti-shock system
Transmission or Recording
(Single Mode)
Performance(1000Base-T / LAN)
Trans: Up to 120fps(NTSC)/100fps (PAL)
Rec : Up to 120fps(NTSC)/100fps (PAL)
when Single Mode with 4channels at D1 (About 23Kbyte/Image)
Transmission and
Recording
(Duplex Mode)
Performance(1000Base-T / LAN)
Trans: Up to 120fps(NTSC)/100fps (PAL)
Rec : Up to 110fps(NTSC)/100fps (PAL)
when Duplex Mode with total channels at D1 (About 23Kbyte/Image)
Transmission and
Recording and Playback
(Triplex Mode)
Performance (1000Base-T / LAN)
Trans: Up to 120fps(NTSC)/100fps (PAL)
Rec : Up to 110fps (NTSC)/100fps (PAL)
when Triplex Mode with total channels at D1 (About 23Kbyte/Image)
Voice
4 bit G.723, Sampling rates 8KHz, Mono Audio
4ch in & 1ch out
LAN interface
10/100/1000 BaseT Ethernet auto sensing
Alarm I/O Interface
4 Photo-coupled inputs and 4 Relay output
Video Input
4 Channel Composite Video Input
Quad Output
1 Channel Quad Composite Video Output
Serial Interface
Two serial ports for console, modem(PSTN & GSM), serial input/output
device, PTZ
COM Port is RS-232,
AUX port can be configured as RS-232, RS-485
Max Baudrate: 115200 bit/s
Security features
Multi user level protection for camera access,
PTZ, Alarm I/O
Advanced Service
Up to 19.2M memory for Pre/Post alarm buffer
e-mail, FTP, alarm Buffer by event or schedule
IP notification, Alarm Notification to e-mail,
CGI Call by event or schedule
Built-in Motion detections
Accuracy: 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
FW-5470 User’s Manual Part 1
4034 4 Seyeon Tech Co., Ltd
PTZ & UART Control
Support
PTZ and UART device control through serial interface Up to 35 PTZ
protocols from Pelco “P” & “D” protocol, Vicon V1311RB,
Samsung, Honeywell and Etc,. X10 device control
Dial in/out via PSTN or GSM modem
Others
Time stamp on Video
Transmit Serial input data transfer with Video
IP notification by e-mail
Management
Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser.
Developer support
Provides HTTP CGI API
ActiveX control development kit
PWR Supply
SMPS input: 100~240VAC, 1.5A
Output:DC 12 Volt, 5 A, SMPS
PWR Consumption
DC 12Volt Max : 3.5A, normal : 2.0A
Operating Environment
Temperature : 41° ~ 122°F (5° ~ 50°C)
Humidity : 20 ~ 80% RH(non-condensing)
Accessories
Power supply 12 V DC / Power cord
Connector kit
CD for User Guide, Installation wizard
Quick Installation guide
Miscellaneous
Freely downloadable NDVR Software
AVI conversion tool support by FW-voyager.
Work with FW-Manager( NDVR S/W)
Dynamic IP support through IPCCTVDNS
Users
32 simultaneous users
Installation, management
and maintenance
Installation CD and web-based configuration
Configuration backup and restore
Firmware upgrades over HTTP or FTP , firmware available at
www.flexwatch.com
Video access from Web
browser
Video access from Web browser
Minimum Web browsing
requirements
Pentium III CPU 500 MHz or higher
Windows XP, 2000, NT4.0*,
Internet Explorer 6.x or later
System integration support
Powerful API for software integration available at
http://www.flexwatch.com, including Simple Viewer API, FlexWATCH
Control SDK, event trigger data in video stream, embedded scripting
and access to serial port peripherals over HTTP/TCP
User can be installed user program daemon for event notification or
sending image.
Embedded operating system: Linux 2.6
Supported protocols
HTTP, TCP/IP, FTP, Telnet, RARP, PPP, PAP, CHAP, DHCP, SMTP
client(e- mail), NTP, Java
Applications (not included)
FlexWATCH Manager 16/32/128/256
Included Accessories
Power supply 12 V DC, mounting brackets, connector kit, Installation
Guide, CD with installation tool, software and User’s Manual.
Not included
Accessories
19” Rack Mount Bracket
Approvals
FCC : Class A
CE : Class A
Dimensions (HxWxD) and
weight
Size :280 mm(L) x 217mm(W)X 44mm(H)
11 ”(L) x 8.5 ”(W)X 1.73 ”(H)
Weight : 1560 g (3.43lbs) without power supply.
Table 1 : FW-5470 Specification
FW-5470 User’s Manual Part 1
4034 5 Seyeon Tech Co., Ltd
1.4. Packing List
FW-5470’s packing box includes the following items.
FW-5470 (w/o HDD)
1ea
Power Supply Unit
(Power Cable & SMPS DC12V 5A Adapter)
1ea
CD (User’s Manual, installation wizard and Pictures)
1ea
Table2 : FW-5470 Packing List
Please check all the listed items are included in your package. For any missing items, please contact
your local distributor.
FW-5470 User’s Manual Part 1
4034 6 Seyeon Tech Co., Ltd
2. Hardware Description
2.1. FW-5470 Front Panel View
Picture 2 : FW-5470 Front Panel
A B C D E F G H I
Picture 3 : FW-5470 LEDs at Front Panel
Name
Description
A
Power On/Off
Switch
To turn on and off the power.
You must use it to turn off the power. Do not plug-out the power
cable before completely turned off by this button. Do not turn off
during HDD format process. It may cause damage on HDD.
B
POWER LED
Red light blinks when power is provided.
C
STATUS LED
Green light blinks after booting.
D
LAN LINK LED
Green light blinks when LAN is physically connected.
E
LAN(Tx/Rx) LED
Green light blinks when there is data transmission at the connected LAN.
F
HDD LED
Green light blinks when formatting or recording at HDD.
G
RECORDING LED
Red light blinks when HDD is recording.
H
Factory Default
Switch
This button can reset the factory default settings at the system. Especially
when a user lost his/her admin-password, or when it got any uncertain
faulty operation.
- After reboot the system, wait until hearing two times of beep sound.
- Keep pressing FD button for 5~10 seconds until hearing three times
short beep sound. ACT LED blinks during the process. The system will
reboot automatically when it’s completed.
I
HDD ventilation
halls
HDD ventilation halls.
Always ensure to Keep open and clean around this area.
J
FW-5470 User’s Manual Part 1
4034 7 Seyeon Tech Co., Ltd
Table 3 : FW-5470 Front Panel Description
* Description of Beep Sounds
Name
Description
1
Power ON
Beep one time shortly when power switch on.
2
System Ready
Beep two times when booting is finished.
3
Power Off
Beep two times (0.5 sec) when power switch off.
4
HDD Error
Beeps continuously for five seconds when HDD has an error.
To make it keep quiet, you can set it on admin menu.
5
FD Button
Beep one time (0.5 sec) after three seconds and then beep three times
shortly after another three seconds.
Table 4 : FW-5470 Beep Sounds Description
2.2. FW-5470 Rear Panel View
Picture 4 : FW-5470 Rear Panel View
K A B C D E F G H I J
Name
Description
A
Video In 1~4
BNC cable port for 4 Video input.
B
Audio In 1~4
Stereo cable port for 4 Audio input.
C
DI (SENSOR)
Signal input ports for sensor and contact.
D
DO (ALARM)
Signal output ports for alarm and light.
E
AUX
RS-422/485 Ports for PTZ, UART-Out/In.
PTZ must be connected to Aux Port only.
F
LAN
RS-232 ports for Serial input device, Modem or Console
(Hyperterminal)
G
Audio Out
1 Audio Output port
H
COM
LAN Port for 10/100/1000M Base T Auto sensing.
I
Power
Power input ports for DC 12V 5A. (Use the original power supply
unit from the package)
J
Video Quad Out
Video outport port for Quad View
K
Cooling FAN
HDD Cooling FAN
Always ensure to Keep open and clean around this
area.
Table 5 : FW-5470 Rear Panel Description
FW-5470 User’s Manual Part 1
4034 9 Seyeon Tech Co., Ltd
3. FW-5470 HW installation and basic setup
3.1. Before installation,
Read carefully User’s Manual
Check-out if the power source is stable or not at the environment.
3.2. Factory Default Condition
The following table shows the factory default condition. Please refer to this when you need to change
the values on admin menu.
Factory Default Condition
Admin ID
root
Admin password
root
IP address
10.20.30.40
Network mask
255.255.255.0
Gateway
10.20.30.1
Table 6 : Factory Default Condition
Factory default Admin ID and Password are all lower case letters. You can change the password
with Capital letters.
3.3. FW-5470 Hardware installation
Following steps are the physical installation process for FW-5470.
1. Install CCTV cameras at each required position.
2. Connect BNC cable between CCTV camera’s V-out and FW-5470’s V-in.
3. Connect a LAN cable at FW-5470 in your local network.
4. Connect the power cable at FW-5470.
After that, you need to follow the steps below.
First, Network Configuration by FW-installer.
Second, Camera Configuration by FW-installer or admin-menu.
Third, Service Configuration by FW-installer or admin-menu.
For IP setup, refer to “Chapter 2.Network Configuration” on User’s Manual Part2.
FW-5470 User’s Manual Part 1
4034 10 Seyeon Tech Co., Ltd
3.4. FW-5470 Rack Mount-kit installation
Rack Mount-kit is sold separated, so it is not basically included in the product package. Following steps
shows how to install it with FW-5470.
3.4.1. Packing List of Rack Mount-kit
A. Right wing guide……………………………..
B. Power rack guide…………………………….
C. Junction Joint (Long)………………………..
D. Junction Joint (Short)………………………..
E. Screw Bolts……………………………………
FW-5470 User’s Manual Part 1
4034 11 Seyeon Tech Co., Ltd
3.4.2. Installation procedure
A. Insert Power Adapter to Guide
B. Fix with Screw bolt
C. Arrange Right Rack Guide D. Insert junction Part and fix by screw bolt
E. Arrange Power Rack Guide F. Insert junction Part and fix by screw bolt
G. Plug Power cable to Power connector and finish installation
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Seyeon FW-5470 User manual
- Category
- Video switches
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Intplus Network Video Server FlexWATCH 3110 User manual
-
IT Works M4029Q Owner's manual
-
Costar CCI2138PX Owner's manual
-
Xvision Elite 9004P User manual
-
Dongyang Unitech DNC User manual
-
Dell Wyse 3040 Thin Client Owner's manual
-
Dell Wyse 5470 All-In-One User guide
-
-
AirLive WL-5470POE User manual
-
