ROOMS TO GO 87025055 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Progressive Cocktail Table model T254-01. This document provides a detailed parts list and step-by-step guide to assembling the table, emphasizing safety precautions like using a smooth surface, checking all parts and ensuring hardware is out of reach of children. I’m ready to help answer any questions you have about setting up your new table.
  • What should I do before starting the assembly?
    Should I tighten all screws immediately?
    What should I do with the hardware parts?
Progressive ®
f u r n i t u r e
ASSEMBLE INSTRUCTION
Model No : T254-01 COCKTAIL TABLE
I M P O R T A N T N O T E :
·Place all wooden parts on a clean and smooth surface such as a rug or
carpet to avoid the parts from being scratched.
·Check to be sure that you have all parts and hardware.
·Remove all wrapping materials, including staples & packing straps
before you start to assemble.
·Do not tighten all screws / bolts until all completely assembled.
·Keep all hardware parts out of reach of children!
·Tighten screws periodically! With the use of this product bolts and
screws may become loose over time!
·Don't attempt to modify parts!
PART LIST
NO DESCRIPTION QTY/PCS
TABLE TOP
TABLE LEG-1
TABLE LEG-2
1 PC
1 PC
2 PC
1
2
3
PART LIST
NO DESCRIPTION QTY/PCS
BOLT M6 x 40MM 9 PC
1 PC
A
B
C
LEVELLER
9 PC
9 PC
4 PC
D
E
ALLEN KEY M4 x 60MM
SPRING WASHER M6 x 12MM
FLAT WASHER M6 x 19MM
STEP 1
MADE IN MALAYSIA PAGE 1 OF 2
3
2
B A
C
D
Progressive ®
f u r n i t u r e
ASSEMBLE INSTRUCTION
Model No : T254-01 COCKTAIL TABLE
I M P O R T A N T N O T E :
·Place all wooden parts on a clean and smooth surface such as a rug or
carpet to avoid the parts from being scratched.
·Check to be sure that you have all parts and hardware.
·Remove all wrapping materials, including staples & packing straps
before you start to assemble.
·Do not tighten all screws / bolts until all completely assembled.
·Keep all hardware parts out of reach of children!
·Tighten screws periodically! With the use of this product bolts and
screws may become loose over time!
·Don't attempt to modify parts!
STEP 2
MADE IN MALAYSIA PAGE 2 OF 2
STEP 3
E
A
CD
B
/