2. Akro-Mils
  3. 29300

Akro-Mils 29300 Operating instructions

  • I have reviewed the instructions for the 29300 Label Inserts from AKRO-MILS. This document provides detailed guidance on setting up your word processor to print custom labels compatible with these inserts. I’m ready to answer any questions you might have about the instructions or the product itself.
  • What is the label holder item number for these inserts?
    How many inserts are included?
    What is the page size to be set for the template?
LASER/INK JET COMPATIBLE INSERTS
For Label Holder Item #29300
INSTRUCTIONS
USING YOUR WORD PROCESSING SOFTWARE:
1. CREATE A CUSTOM LABELS TEMPLATE:
• Select Tools from your Toolbar
• From the drop down window select Envelopes & Labels
• On the Labels Tab;
• Click the Options button
• In the box labeled Label Products: Choose "Other"
• Click on the New Label button
2. SETTINGS:
• In the box labeled Label Name: Enter a name for your New Labels (i.e. Our Product #29300)
• Top Margin: 1.38"
• Side Margin: 1.25"
• Label Height: 0.69"
• Vertical Pitch: 0.69"
• Label Width: 2.9375"
• Horizontal Pitch: 2.9375"
• Number Across: 2
• Number Down: 12
• Set Page Size: Letter, 8-1/2" x 11"
• CLICK OK
You now have a custom template saved for your "New" Akro-Mils Label Holder Inserts. You can create a full page of the same
label, single labels, or mail merges. To use this template at another time: Click on Tools, Envelopes & Labels, Label Products,
Select "Other" then click on the Product # (This is the Label Name you just created i.e. 29300).
NOTE: Labels to be inserted into Holder with the beaded side at the top to ensure proper fit when installed.
1293 South Main St.• Akron, OH 44301
1-800-253-2467 • www.akro-mils.com
Inserts for
FITS BIN SIZES
QTY.
Item #
29300
30110, 30120, 30130, 30150,
30170, 30128, 30138, 30158, 30178,
30124, 30164, 30184, 30174
72
/