TrailFX WA014 Installation guide

www

Page 1 of 1 Rev 042315

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.

READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

support@trailfx.com

1 866 638 4870

LIMITED 90 DAYS WARRANTY

Part List Qty Specifications

Winch Accessory Bag 1 Heavy weight denier bag

Snatch Block 1 17,600 lbs Capacity

Recovery Strap 1 2" x 30’; B.S :14,400 lbs / WLL : 4800 lbs

Tree Trunk Protector 1 2" x 8’; B.S :14,400 lbs / WLL : 4800 lbs

D- Shackles 2 3/4”; 4.75 T

Winching Gloves 1 Pair Heavy duty gloves

Choker Chain with hooks 1 16’ of 5/16”; 5T

FOLLOW SAFE WINCHING PROCEDURE

1. Neglect or Misuse of the product and / or incorrect recovery procedure can cause failure which can lead to serious injury or death.

2. Never exceed safe working load limits.

3. Do not use for overhead lifting.

4. Avoid shock loading.

5. Always inspect parts for damage before each use.

6. Do not use parts if any signs of damage, deformation or alterations are present.

7. Keep safe distance during vehicle recovery.

8. Always keep spectators away at safe distance during the recovery procedure.

Check out these other TrailFX Products!!

www.TrailFX.com

Accessory Kit-

Medium Duty

Part No. WA014

Fits: TrailFX Winches - W08B, W10B, W12B & WS10B

Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of purchase by the

original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of fitness for a particular purpose or an

intended use. If the product is found to be defective, KAO may replace or repair the product at our option, when the product is returned prepaid,

with proof of purchase. Alteration to, improper installation, or misuse of this product voids the warranty. KAO’s liability is limited to repair or

replacement of products found to be defective, and specifically excludes liability for any incidental or consequential loss or damage.