2. Lefroy Brooks
  3. LB 3225

Lefroy Brooks LB 3225, LB 3222, LB 3224, LB 3226, LB 3227, LB 4970 Installation & Servicing Guide

  • Hello! I've reviewed the installation guide for the LEFROY BROOKS basin stands, models LB 3222, LB 3224, LB 3225, LB 3226, and LB 3227. This document provides detailed dimensions, wall fixing guidance, and step-by-step instructions, including adjustable support for leveling the stands. I'm ready to answer your queries regarding the installation of these basin stands.
  • What type of walls are the provided fixings suitable for?
    What wall fixings should be used for plasterboard or soft building block?
    How much vertical adjustment is available on the supports?
    When should the basin be fixed to the wall?
LB 3222 / LB 3224 / LB 3225 / LB 3226 / LB 3227
BASIN STAND
INSTALLATION GUIDE
250mm
420mm centres
820mm
670mm
Ø25mm
Ø75mm
Ø45mm
3
IMPORTANT INFORMATION
Professional installation
We recommend that our products are fitted by
a fully qualified professional. A ‘tester’ should
be used to ensure there are no hidden pipes or
electric cables installed where the product is to
be fitted.
Wall fixings
The screws and wall plugs provided are suitable
for most brick walls. However, appropriate
fixings should be used if the wall is plasterboard
or soft building block.
Not to scale
LB 3222
DIMENSIONS
Ø25mm
775mm
625mm
450mm
520mm centres
Ø75mm
Ø45mm
Ø45mm
380mm
555mm centres
820mm
670mm
Ø25mm
Ø75mm
4
LB 3224
Not to scale
Not to scale
LB 3225
Ø23mm
Ø25mm
770mm
620mm
330mm
495mm centres
Ø75mm
Ø25mm
770mm
620mm
410mm
570mm centres
Ø75mm
Ø45mm
5
LB 3226
Not to scale
LB 3227
Not to scale
6
INSTALLATION
1 Position the basin stand against the wall.
2 Use a spirit level to check the legs and
cross member are vertical/horizontal.
3 Mark the hole positions for the wall plates.
4 Remove the basin stand and drill the holes
using a suitable drill for the supplied fixings.
5 Insert the wall plugs.
6 Secure the basin stand to wall.
7 There are adjustable supports at the top of
the basin stand legs. These are designed to
give 5mm of vertical adjustment. Place
a spirit level across the adjustable supports
and individually rotate until level.
8 Position the basin on the basin stand and
secure to the wall before fitting brassware/
ancillaries.
Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part
of the company’s product development process. The use of trademarks, product design and artwork is subject to
licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected
by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs
and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design). E&OE
© LBIP Ltd 2023
CONTRACT ENQUIRIES
+44 (0)1992 708 316
info@lefroybrooks.co.uk
CUSTOMER SERVICE, SPARES & TECHNICAL ENQUIRIES
+44 (0)1902 390 894
technical@lefroybrooks.co.uk
LEFROYBROOKS.CO.UK
20.065.366A / MARCH 2023
/