2. Cumberland
  3. Mega-Cool Pump Components

Cumberland Mega-Cool Pump Components Owner's manual

  • Hello! I've reviewed the instructions for the Cumberland Mega-Cool Pump components, specifically models 1062-5027-HH, 1062-5017, 1062-5024, 1062-5012, 1062-5019 and 1062-5032. This document provides a guide on installing the strainer basket and features a parts list. I'm ready to assist with your questions about these components.
  • What is the first step when installing the strainer basket?
    Where should the half nuts be assembled?
    Where should the gasket be placed?
Date: 06-30-22 V3.0 4802-6502
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
4802-6502
Page 1 of 1
Printed in the USA
Copyright © 2022 by The GSI Group, LLC
www.cumberlandpoultry.com CN-405315
Mega-Cool Pump Components
Mega-Cool Pump Components
When installing the strainer basket to the pump:
1. Remove the gasket and half nut parts from the inside of the strainer basket.
2. Assemble the half nuts around the outside of the strainer discharge with the screws provided.
3. Place the gasket inside the union of half nuts and assemble to the front of the pump.
Figure 1 Mega-Cool Pump Components for 1062-5027-HH
NOTE: All items are not available individually.
Ref # Part # Description
1-16 1062-5027-HH Evap Pump, Jet System 3/4 HP, 1 PH, 208V-230V, 50/60 Hz
1-8 1062-5017 Strainer Basket 6" for Jet Pump
21062-5024 Pump MC 6" Strainer Lid O-Ring
8 1062-5012 Gasket 1-1/2" for 6" Strainer Basket from Water Way
9-14 1062-5019 Wet End for 3/4 HP Motor
15-16 1062-5032 Motor MC Pump NIDEC PSC 3/4 HP 208V-230V 50/60 Hz
/