Barclay Products 185R-CP Installation guide

Category
Sanitary ware
Type
Installation guide
Washerless
Diverter Bathcock
INSTALLATION INSTRUCTIONS
P 847•244•1234 www.barclayproducts.com
9/16/10
1. Before beginning any work be sure to shut off the water supply.
2. Apply teflon tape to ends of both the hot and cold supply nipples.
Place valve body through holes in tub. Thread the large locknuts
onto the other ends of the nipples and secure the shower set to the tub.
3. a. For models 191-S and 195-S with for use with risers, assemble riser pipe to the riser coupling
assembly on the spout by tightening the coupling nut. After hand tightening, fasten securely by
using a wrench.
b. For model 205-S for use with handshower, place rubber washer into hose connection and connect
the hose to top of valve body.
4.Turn on water supply.
Tools Needed
Wrench
  • Page 1 1

Barclay Products 185R-CP Installation guide

Category
Sanitary ware
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI