Plastic Basket Assembly Instructions
For 4” x 10”, 4” x 20”, 8” x 10”, or 8” x 20” Baskets
Parts Included:
•2sidepanels
•2notchedbasketbottoms
•1notchedbasketbottomfrontwithmiteredcorners(forallbaskets)
•1notchedbasketbottomback(onlyfor8”deepbaskets)
•2cornercaps
•1transparentfrontpanel
Illustration A:
InsertsidepanelsintoEasyWall.(Placementshouldbe
10inchesapartfor10inchbasketand20inchesapart
for20inchbasket)
Illustration B:
Slildethecornercapsonthetransparentfrontpanel;
thenslidetheassembledfrontpanelontotheside
panels.
Illustration C:
Dropthenotchedbasketbottomfrontintoplace,
overthelipsofbothsidepanelsandthetransparent
frontpanel.For8”deepbaskets,addbasketbottom
backonsidepanels,notchesdown.Makesurethat
thenotchestintothechannelsofthesidepanels.
For Customer Support:
920-467-2477 FAX 920-467-2530
www.jifram.com
10000187 4/23/10
Plastic Basket Assembly Instructions
Parts Included:
• 2 side panels
• 2 notched basket bottoms
• 2 corner caps
• 1 notched basket bottom front with mitered corners
• 1 notched basket bottom back (only for 8" deep baskets)
• 1 transparent front panel
Illustration A:
Insert side panels (Illustration A) into Easy Wall. (Placement should be 10 inches apart for 10 inch basket and 20
inches apart for 20 inch basket)
Illustration C:
Drop the notched basket bottom front into place, over the lips of both side panels and the transparent front pa
(Illustration C) For 8” deep baskets, add basket bottom back on side panels, notches down. Make sure that the
notches t into the channels of the side panels.
Illustration B:
Slide the corner caps on the transparent front panel; then slide the assembled front panel (Illustration B onto th
side panels).
Illustration A
Illustration C
For Customer Support:
10000187 11/03/08
Illustration B