Elite Screens IRP100V2 User manual

Brand: Elite Screens

Model: IRP100V2

Type: User manual

This manual is also suitable for

IRP123H2

The Insta-RP 2 Series is an adhesive Rear Projection Film that is self-adhesive for installations on storefronts or any applications

requiring a rear projection system display.

2016 Insta-RP2 Series Product Brochure

Insta-RP2 Series

The Insta-RP 2 Series is an adhesive Rear Projection Film that is self-adhesive for installations

on storefronts or any applications requiring a rear projection system display.

www.elitescreens.com/irp2

• Self-adhesive optical rear projection material

• Textured PET (Polyethylene terephthalate) with diffusion layer

• 2.2 gain with 180º wide diffusion uniformity

• Material is easy to clean and maintain

• Angular projection setup for elimination of "hot-spot"

Note: Data Error ±1". The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture

modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.

Model

Screen Diag. &

Aspect Ratio

View Height (A) View Width (B) Thickness (C)

IRP100V2 100"(4:3) 60.0 80.0 0.0066

IRP123H2 123"(16:9) 60.0 107.0 0.0066

IRP114X2 114"(16:10) 60.0 96.0 0.0066

IRP5x20V2 5'x20' 60.0 240.0 0.0066

Unit: inch

Model

Screen Diag. &

Aspect Ratio