ABRAMTEK ABTK-E100GRY User manual

Brand: ABRAMTEK

Model: ABTK-E100GRY

Category: Portable speakers

Type: User manual

User Manual x1

Bluetooth speakers of Abramtek are stereo Bluetooth solutions, Only Bluetooth phones or

Bluetooth adapters which support A2DP function can build the connection successfully.

Turn on the speaker and enter the Bluetooth mode automatically.

If the beep sound is too low to hear, you can still make the connection when you see the

blue light flashing every 1 second.

Firstly, make sure your phone/tablet/computer/Bluetooth adapter support A2D function.

Check if the power is enough, turn on the speaker by long press , then you can pair the

speaker after hearing a long beep sound.

USB Cable x1

Bluetooth Speaker x1

Thanks for using Abramtek products!

Before using this speaker, please take a few minutes to read the user manual.

Phone Connection

Step 1 Enter the Bluetooth setting and turn on Bluetooth function on the phone

Step 2 Click scanning and locate the speaker (iPhone system skip this step)

Step 3 If there is "abramtek A60" shows on the phone, click it and start pairing.

If password is needed, enter "0000".

Step 4 If successfully paired, the speaker would beep. It means the phone and speaker are

connected successfully.

Bluetooth Communication

Answer phone calls: Under Bluetooth mode, when phone come in, short press could

answer the call. Aim at the microphone when making phone calls to let the conversation

clear.

Hang up phone calls: Short press the after conversation.

Computer Connection

If the computer has no Bluetooth function, Bluetooth driver needs installation. Insert the

adapter, then the Bluetooth can work.

Step 1 Click the Bluetooth mark at the bottom right corner of the computer, and choose

"add advice”

Step 2 Find "abramtek A60", double click it, the driver will be installed automatically, then

successful installation will be showed.

Step 3 Check if the connection is successful by playing the music on the computer. If you

want to play last or next song through the speaker, please play with the media player built in

the

Computer. Windows Media Player for Windows system, iTunes for IOS system.

If there is no sound from the speaker, please check:

1. Whether the audio device of computer switch to Bluetooth mode.

2. Whether the speaker connected with the computer.

3. Whether the volume of the speaker is too small.

Pairing And Connecting

Turn on the speaker and start pairing: If the speaker is never connected to

any phones or other Bluetooth device, it will enter the pairing mode automatically. If the

speaker has been connected to other device before, it will auto connect to the last device

after turning on. If the connection fails, it will enter the waiting for pairing mode after 15-30

seconds.

Micro USB interface: charging, AUX inputs,

data transfer

TF card slot

Reset button

Long press: Power button(Power on/off)

Short press: Mode change

(Bluetooth/TF/AUX/Sound Card)

Double press: Sound effect change

(HiFi/Moive)

Short press: Play/Pause, mute, answer calls

Double Press: Enter/exit wireless twin connection

Short press: Last song/Long press: Volume -

Short press: Next song/Long Press: Volume +

Microphone

Audio Cable x1

Indicator light

Blue Light: In-service condition

Red Light: Charging condition,

red light off when full charged

ShenZhen Abramtek Technology Co.,Ltd.

Add : 4&5/F.Building B,Yonghongfeng Industrial Park,Baiyunshan Village,Shanghenglang,

Longhua Town,Shenzhen,China 518109

http : //www.abramtek.com Email: [email protected]

Tel : 0755-83198311 Fax : 0755-83198155

User Manual

Model: A60

User Manual

Wireless Bluetooth Speaker

TF card support multi-decode music format, such as MP3, FLAC, WMA, WAV, APE,etc.

(Lossless format with sampling rate of less than 48KHz can be readable)

Play order

Play order of songs is sorted by file copied in, not the order by file name, nor by file date

order.

When the speaker is in low battery condition, voice prompt beep, if not charge the speaker

would turn off automatically after prompt three times played. Low battery should be

avoided from battery destroyed.

The speaker can be charged when it is power on or off.

1. Charge with USB cable connected to computer.

2. Charge with USB adapter (electric current > 1000mA). Suggested to use the 2A adapter to

charge.

The red indicator light will be on while charging. The light will be off when fully charged. It

takes about 4 hours to fully charge the speaker.

New battery or speaker that is not charged for a long time needs to charge a few times to

make a full charge.

If the speaker is no power and you need to use the speaker when charging, please charge

the speaker at least half an hour and then use it. It’s better to use it while charging, after

charged fully.

If the adapter’s output voltage is less than 4.75V ( international standard is 4.75V-5.25V), the

speaker will turn on when you turn off to charge, it is the normal phenomenon.

Charging

When the speaker is power on, connect USB cable to computer, speaker switch to

sound card mode automatically and can play music on the computer. Please note

that regularly play while charging will damage the battery badly.

USB cable and Audio cable cannot be use at the same time.

Sound card mode can be use for Windows system only.

Computer/ Laptop

USB Cable/Charging Cable

Sound Card Mode

There are two methods to enter the AUX mode, both have voice prompt:

Inset the AUX cable before opening the speaker, then open it and double click the knob key

to enter AUX mode.

Inset the AUX cable after opening the speaker, it will be in AUX mode automatically.

AUX cable: Suitable for all devices which have 3.5mm jack.

AUX Mode

Packing Content

Under the TF/AUX mode, short press to pause, the speaker will enter sleep mode after

10 minutes. 10 minutes later the speaker will be turn off automatically and indicator light will

be off.

Under Bluetooth mode, if there is no connection over 10 minutes, the speaker will enter

sleep mode. 10 minutes later the speaker will be off automatically and indicator light will be

off.

Wake up the speaker by clicking any button except RESET in sleep mode.

Auto Power-Saving Mode

Bluetooth Connection

Working voltage: 7.4V

Charging voltage: DC 5V 1.5A

Frequency response: 40Hz-18KHz

Speaker specification: 52mm 4Ω 10W*2

Battery capacity: 2200mAh*2

SNR : ≥95dB

Distortion degree: ≤1%

Size: Ø91 x 241mm

Features real-time tracking volume compensation.

This simply means that when you reduce the volume, you can still

experience a good resonating sound of a low frequency level.

Intelligent power amplifier system, which break the traditional power

amplifier that operation principle is stable tone-up, intelligently adjusts

tone-up, well controls the distortion.

Technical Patent

Low Frequency Tracking

Power Amplifier Cracking Voice Proof

Technical Data

Note: Please use genuine TF card(Non-genuine TF card leads to damage of the slot). Before

using new card, format before download songs.

Bit rate: 8kbps-320kbps

sampling rate: 8kHz-48kHz

Bit rate: 5kbps-384kbps

sampling rate: 8kHz-48kHz

Bit rate: Fast/Normal compression

(800kbps-1000kbps)

sampling rate: 8kHz-48kHz

Bit rate: L0-L8

( )1000kbps-1200kbps

sampling rate: 8kHz-48kHz

Bit rate: 32kbps-384kbps

sampling rate: 8kHz-48kHz

Bit rate: 32kbps-384kbps

sampling rate: 8kHz-48kHz

Bit rate: 128kbps-1536kbps

sampling rate: 8kHz-48kHz

Supported Format

Supported Format List

Mp3

WMA

APE

FLAC

WAV

IMA-ADPCM

MS-ADPCM

PCM

WMA lossless

/ WMA PRO

extra high

/ instane

Unsupported

Format

Attention

1. Please don't use it in water.

2. Using in high temperature or extremely cold environment may affect the performance.

3. The battery should not expose in overheat environment, please don' t throw it in fire.

4. Please full charge the speaker when it is not in use for a long time.

5. Please don't block speaker mesh on the product.

6. If the speaker mesh let in water, please dry the speaker before you use it.

7. Please send for repair after a failure appear and please don't repair it yourself.

8. Artificial damage is not within warranty.

Shenzhen Abramtek technology CO.,LTD reserves the right of final interpretation for the product.

Connection mode: Turn on the speaker and enter the pairing mode. If there is no

connection

for 10 minute, please re-open the speaker to search and connect it.

Fail to Pair

1. Make sure the phone support A2DP protocol, computers have compatibility with

Bluetooth driver.

2. Reset the speaker to pair again.

If the speaker cannot be recognized or cannot work normally caused by system updating of

computer/mobile phone/tablet, or the computer Bluetooth hardware is not compatible, then

Abramtek will not take any responsibility.

Fail to Connect to Last Device

If the speaker is turned off and then turned on, it cannot be connected to the last

device. Because the connection between the speaker and the phone or computer is not

broken. Please turn off the phone or computer then turn on to connect the speaker.

Solutions of Failing to Locate the Speaker

1. Check whether the speaker is in pairing mode.

2. Make sure your Bluetooth device is within the speaker’s Bluetooth range (up to 10 meters

without obstruction).

3. Check/restart/reset the Bluetooth settings of the phone.

4. When the speaker is connecting to one device, the other device cannot connect to this

speaker.

5. When your phone is connected to other Bluetooth device, it cannot connect with the

speaker. Please disconnect with other device first and then turn on the speaker to make

pairing.

6. In Bluetooth mode, if there is no connection for 10-15mintunes, the speaker will be in

sleep mode, please short press any button for waking up.

There are two methods to enter TF mode with voice prompt.

Insert the TF card before turning on the speaker, short press and switch to MP3 mode

to play music.

Insert the TF card after turning on the speaker. The speaker will enter the TF mode

automatically and start to play music.

TF Mode

If you have two Abramtek A60 speakers, you could use the wireless twin connection function

to connect the two speakers to form Left and Right stereo channels.

Turn on the Abramtek A60 speaker, before connect to phone or other Bluetooth device

double press the button, when the speaker beep or blue light flash from fast to slow

minutes later, then auto twin is successfully.

The speaker pressed button is the main speaker and it is the left channel, another one

is the right channel. Search “abramtek A60”(the main speaker) on your phone, connect it

then you can play music. Also, you could insert AUX inputs cable in the main speaker with

audio device to play music(AUX cable insert to another speaker is invalid).

If you want to turn off speakers, just turn off one of the speaker, then another speaker would

turn off automatically.

Wireless Twin Connection

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

The default mode is HiFi mode, double press button switch to the MOVIE mode.

Sound Effect Mode

ABRAMTEK ABTK-E100GRY User manual

Brand: ABRAMTEK

Model: ABTK-E100GRY

Category: Portable speakers

Type: User manual

Download PDF

report

ABRAMTEK ABTK-E100GRY User manual

ABRAMTEK ABTK-E100GRY User manual

Other documents