AAXA KP-600-01 User manual

Category
Data projectors
Type
User manual

This manual is also suitable for

aaxa
TECHNOLOGIES
User Guide
P3OO Pico Projector
Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur.
DO NOT expose the projected LED
image to your eyes or the eyes of
others
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat
Keep the projector, battery, or
charger away from any heat sources
Caution for Battery Use
Do not pierce or puncture the battery
with sharp objects
Do not heat the product or expose it to
high temperature.
Do not wet it or place it in any liquid
Caution for Headphone Use
Prolonged use at high volume may
impair your hearing.
High volume during walking or driving
may cause distractions and result in
injury or death
Table of Contents
Chapter 1: P300 at a glance
Main Unit Front/Back
Remote & Keypad
Accessories
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment / Throw
Distance
Battery Installation
Connecting to a Computer VGA
Connecting to a Digital Input
Connecting to Composite Video
Connecting to Digital Input Video
Connecting to Speaker or Head-
phones
1
2
3
4
5
6
7
8
10
12
14
16
17
19
21
22
24
25
27
28
30
31
32
37
39
40
41
Connecting a TF Card
Connecting to a USB Host
Chapter 3: Menu Screens
Main menu
Video Player Menu
Video FAQ
Photo Viewer Menu
Photo FAQ
Music Player Menu
Music FAQ
Ebook Viewer Menu
Setup Menu
Keystone Adjustments
Chapter 4: Technical Details
Troubleshooting
Specications
1
P300 at a Glance
2
Chapter 1
Power On/Off
Main Menu
Navigation
Power Switch
TF Card
Headphone Out
USB Port
Main Unit Front/Back
VGA Port
Power Button
Digital Input
AV Input
DC Adapter Port
Focus Adjustment
PWR
Gamma
M
ENU
U
UP
EXIT
VOL-
OK
VOL+
I
U/D
DOWN
R/L
VGA Menu
AV
Menu
Remote & Keypad
3
NOTICE: Pressing power on the remote will only put the projector in STANDBY
mode. Please press the power button on the projector if you want to turn it off.
Power On/Off
Main Menu
Navigation
Select Source
Media Player Menu
Navigation
Input Exit/Back
Direction Pad
Both the keypad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P300 unit.
On / Off
LED Lights
Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Tripod
Remote
Power Adapter
VGA Cable
A/V Cable
PWR
Gamma
M
ENU
U
UP
EXIT
VOL-
OK
VOL+
I
U/D
DOWN
R/L
VGA Menu
AV
Menu
Internal Battery
(extra battery available for purchase)
Getting Started
1. Connect the power cord to the P300.
2. Connect the wall plug into the wall power source.
3. Switch the On / Off switch on the side of the projector to the “ON” position to enter
“standby” mode
4. Press POWER button on the keypad and hold for 2-3 seconds to start the projector
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and hold the power button on the keypad for 3 seconds.
2. The optical engine should power off and the fan should stop spinning. The projector
is now in “stand by mode” and can be turned on using the remote control. “Stand by
mode” consumes a little bit of power
3. To fully turn off the projector, switch the On / Off switch on the side of the projector to
the “Off” position
Note: The P300 Projector battery does not charge when it is in operation.
Focus Adjusment / Throw Distance
Focus Adjustment
Spin the focus wheel up or down until the image becomes
clear.
6
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance Chart
Distance inch (“)
20
30
40
50
60
70
80
90
Diagonal Inch (“)
17
25
34
42
51
59
68
76
Throw Ratio 1.38
*minimum throw distance: 10 inches
Installing the Battery Pack
7
1. Remove the three screws circled in blue holding
the P300 battery.
2. Connect the battery harness to the battery recep-
tacle on the PCBA
3. Install the new battery housing
Connecting to a Computer via VGA
Connect the large end of the
8
VGA Cord
to your computers
VGA Adapter
Connect the small end of the
VGA Cord
to your P300’s
VGA Adapter
Step 1:
Step 2:
Step 3:
In the Main Menu
Select “VGA” icon Select “INPUT” icon
Connecting to a Computer Cont.
Step 4:
Enabling VGA or Digital Video output on your Computer – To enable VGA or Digital Video
output on your com-puter most computers require “turning on” the video output feature. Each
computer is different. Please consult your owner’s manual for instructions to enable VGA or
Digital Video output. Below are standard instructions for a Windows XP computer – not all
systems are the same.
Press function & “F5” to instruct the
computer to enable multiple displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating systems
may differ
Step 5:
1. Right click on computer desk-
top and select “Properties”
2. Display Properties window
will pop up
3. Click on the “Settings” Tab
4. If a secondary monitor is
grayed out, click on it and
check “Extend my Windows
Desktop onto this monitor”
5. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x800.
Step 6:
9
Connecting to a Computer via Digital Input
Connect one end of the
10
to your computer’s
to your P300s
Step 1:
Step 2:
Step 3:
Select “INPUT” icon
In the Main Menu
Connect one end of the
Select “Digital Input” icon
Connecting to a Computer Cont.
Step 4:
Enabling VGA or Digital Video output on your Computer – To enable VGA or Digital Video
output on your com-puter most computers require “turning on” the video output feature. Each
computer is different. Please consult your owner’s manual for instructions to enable VGA or
Digital Video output. Below are standard instructions for a Windows XP computer – not all
systems are the same.
Press function & “F5” to instruct the
computer to enable multiple displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating sys-tems
may differ
Step 5:
1. Right click on computer desk-
top and select “Properties”
2. Display Properties window
will pop up
3. Click on the “Settings” Tab
4. If a secondary monitor is
grayed out, click on it and
check “Extend my Windows
Desktop onto this monitor”
5. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x800.
Step 6:
11
Connecting to Composite Video
Connect one end of the
Composite Cord
to your P300’s
A/V Adapter
Connect opposite end of
to your devices
Step 1:
Step 2:
Composite Cord
Composite Cord
12
Connecting to Composite Video Cont.
Connectivity with multimedia devices
The P300 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the P300.
13
Step 3:
Select “INPUT” icon
In the Main Menu
Turn on your multimedia device.
Step 4:
Select “AV” icon
Connecting to Digital Input Video
Connect one end of the
to your P300’s
to your devices
Step 1:
Step 2:
14
Connect one end of the
14
Connecting to Digital Input Video Cont.
Connectivity with multimedia devices
The P300 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the P300.
15
Step 3:
In the Main Menu
Turn on your multimedia device. If avaiable select 1280x720 or 1920x1080
Step 4:
HDMI Adapter
Select “INPUT” icon
Select “Digital Input” icon
Connecting Speakers/Headphones
Connect your speakers/headphones
to
the projectors speaker adapter.
16
3.5 mm cord Speaker Adapter
Step 1:
Step 2:
*CAUTION for Headphone Use
Prolonged use at high volume may impair
hearing
Ensure the power and volume on your
speaker or headphones is turned on
Step 3:
Place the headphones on and enjoy!
TF Card
17
How to insert your TF Card
Slide in your TF card into the TF card
slot on the front of the P300. (as shown
in picture)
Gently slide the TF card until it clicks
into place.
How to access your TF Card
Once your TF Card has been inserted,
you can navigate to any media content
in the main menu..
After selecting the media content,
choose the TF card selection.
You can now access the data on your
TF card through the onboard media
player
*Review the "Specifications"
section of this manual to read
about the supported file
formats.
Speaker Adapter
TF Card Cont.
18
Media Player menu
In the Media Player selection you can
choose from Videos, Audio, Pictures,
and Ebooks.
Select the appropriate menu for the type
of le you wish to view.
Return: Brings you
back to the main
menu
File Menu System
The P300 will show all folders and files
you have on your TF Card in the C:
drive.
Use the directional buttons to navigate
to different folders or files.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

AAXA KP-600-01 User manual

Category
Data projectors
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI