FLIR M4200 - M4200P Series User manual

Instruction Manual

M3200 / M4200 SERIES

Instruction Manual

M3200 / M4200 SERIES

#LX400051; r. 1.0/23100/23101; en-US

iii

Thank you for purchasing this product. FLIR is committed to providing our customers with a high quality,

reliable security solution.

This manual refers to the following models:

M3200 Series: M3204 (4-channel) / M3208 (8-channel) / M3216 (16-channel)

M4200 Series: M4204 (4–channel) / M4208 (8–channel)

For the latest online manual, downloads and product updates, and to learn about our complete line of

accessory products, please visit our website at:

www.flirsecurity.com/pro

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT REMOVE

COVER. NO USER SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG

TO THE WIDE SLOT AND FULLY INSERT.

#LX400051; r. 1.0/23100/23101; en-US

iv

Table of contents

1 Important Safeguards ..........................................................................1

1.1 General Precautions....................................................................1

1.2 Installation.................................................................................1

1.3 Service ..................................................................................... 3

1.4 Use.......................................................................................... 3

2 M3200 Series Features.........................................................................4

3 M4200 Series Features.........................................................................5

4 Getting Started (M3200 / M4200 SERIES)................................................6

5 Series Front Panel (M3200 / M4200 SERIES) ...........................................7

5.1 M3200 / M4200 Series.................................................................7

6 Rear Panel (M3200 / M4200 SERIES) ......................................................9

6.1 M3200 Series ............................................................................ 9

6.2 M4200 Series .......................................................................... 10

7 Basic Setup (M3200 / M4200 SERIES) .................................................. 12

7.1 Step 1: Connect the BNC Cameras............................................... 12

7.2 Step 2: Connect the Mouse......................................................... 12

7.3 Step 3: Connect the Ethernet Cable .............................................. 12

7.4 Step 4: Connect the Monitor........................................................ 13

7.5 Step 5: Connect the Power Adapter and Power on the DVR................ 13

7.6 Step 6: Upgrade Firmware to Latest Version (if Available) .................. 13

7.7 Step 7: Verify Camera Image ....................................................... 14

7.8 Step 8: Set the Time .................................................................. 14

7.9 Default System Password & Port Numbers ..................................... 14

7.9.1 FLIR Cloud™ ................................................................ 14

7.10 Quick Access to System Information ............................................. 15

8 About MPX........................................................................................ 16

8.1 What types of cabling and run lengths does MPX work with? .............. 16

9 Mouse Control .................................................................................. 17

10 Remote Control ................................................................................. 18

10.1 Setting the Remote Control Address ............................................. 19

11 Using the System .............................................................................. 20

11.1 On-Screen Display.................................................................... 20

11.2 Using the Quick Menu................................................................ 21

11.3 Adjusting Color Settings ............................................................. 21

11.4 Using the Navigation Bar ............................................................ 22

11.5 Using the Camera Toolbar .......................................................... 22

11.5.1 Using Quick Playback ..................................................... 23

11.5.2 Using Digital Zoom in Live Display ..................................... 23

11.5.3 Using Real-time Backup .................................................. 23

11.6 Using the Virtual Keyboard.......................................................... 24

12 Setting The Time ............................................................................... 25

13 Recording......................................................................................... 26

13.1 Video Recording Types .............................................................. 26

13.2 Main Stream and Sub Stream ...................................................... 26

13.3 Setting up Scheduled or Manual Recording .................................... 26

13.4 Configuring Hard Drive Overwrite ................................................. 27

14 Search (Playback) ............................................................................. 28

14.1 Playing Back Video from the Hard Drive......................................... 28

#LX400051; r. 1.0/23100/23101; en-US

v

Table of contents

14.2 Playback Controls ..................................................................... 29

14.3 Playing Back from a USB Drive .................................................... 29

15 Backup............................................................................................. 31

15.1 Formatting the USB Thumb Drive ................................................. 31

15.2 Backing up Video...................................................................... 32

15.3 Using Video Clip Backup ............................................................ 32

15.4 Viewing Backup Files................................................................. 33

15.4.1 Viewing Backup Files on PC ............................................. 33

15.4.2 Viewing Backup Files on Mac ........................................... 36

16 Managing Passwords and User Accounts............................................. 39

16.1 Changing Passwords................................................................. 39

16.2 Adding Users ........................................................................... 40

16.3 Modifying Users ....................................................................... 40

16.4 Deleting Users ......................................................................... 41

16.5 Account Groups ....................................................................... 41

16.6 Adding Groups ......................................................................... 41

16.7 Modifying Groups ..................................................................... 42

16.8 Deleting Groups ....................................................................... 42

17 Using the Main Menu ......................................................................... 43

17.1 Camera .................................................................................. 43

17.1.1 Recording..................................................................... 43

17.1.2 Configuring Recording Quality .......................................... 44

17.1.3 Configuring Audio Recording ............................................ 45

17.1.4 Configuring Snapshot Recording Settings............................ 45

17.1.5 Creating Custom Channel Names...................................... 46

17.1.6 Selecting Cable Type ...................................................... 47

17.2 Info ........................................................................................ 48

17.2.1 HDD Info ...................................................................... 48

17.2.2 Record Info................................................................... 48

17.2.3 Version ........................................................................ 49

17.2.4 Alarm Status ................................................................. 49

17.2.5 Online Users ................................................................. 50

17.2.6 Load............................................................................ 50

17.2.7 Test............................................................................. 51

17.2.8 BPS ............................................................................ 51

17.2.9 Log ............................................................................. 51

17.3 Setting.................................................................................... 53

17.3.1 Network ....................................................................... 53

17.3.2 Selecting DHCP or Static IP Address (TCP/IP) ...................... 53

17.3.3 Configuring System Ports (Connection)............................... 54

17.3.4 Configuring DDNS Settings .............................................. 54

17.3.5 Configuring Email Alerts .................................................. 55

17.3.6 Event........................................................................... 56

17.3.7 Configuring Motion Detection............................................ 56

17.3.8 Configuring Video Loss Settings ........................................ 58

17.3.9 Configuring Alarm Input Devices........................................ 59

17.3.10 Controlling Alarm Output Devices ...................................... 60

17.3.11 Configuring Hard Drive Warnings....................................... 61

17.3.12 Configuring Network Warnings .......................................... 62

17.3.13 Storage........................................................................ 62

#LX400051; r. 1.0/23100/23101; en-US

vi

Table of contents

17.3.14 Configuring the Video Recording Schedule .......................... 63

17.3.15 Configuring Pre-Recording ............................................... 63

17.3.16 Configuring the Snapshot Schedule ................................... 64

17.3.17 Configuring Holidays....................................................... 65

17.3.18 Formatting the Hard Drive ................................................ 66

17.3.19 Configuring Hard Drive Type ............................................. 67

17.3.20 Setting up Hard Drive Mirroring (Advanced) ......................... 67

17.3.21 Configuring General System Settings ................................. 68

17.3.22 Setting the Monitor Resolution (Display) .............................. 69

17.3.23 Configuring RS232 for a PTZ Keyboard............................... 70

17.3.24 Saving Your System Configuration to a USB Thumb

Drive ........................................................................... 71

17.3.25 Setting the System to Factory Defaults................................ 72

17.3.26 Upgrading Firmware from USB.......................................... 73

17.4 Shutdown................................................................................ 75

18 Connecting to Your System Over the Internet on PC or Mac .................... 76

18.1 System Requirements................................................................ 76

18.2 Step 1 of 3: Connect your System to Your Router ............................. 76

18.3 Step 2 of 3: Obtain the system’s Device ID...................................... 77

18.4 Step 3 of 3: Connect to the System Over the Internet ........................ 77

19 Using FLIR Cloud™ Client for PC or Mac .............................................. 81

19.1 Home Page ............................................................................. 81

19.2 Live View ................................................................................ 81

19.2.1 Live View Controls.......................................................... 82

19.2.2 Opening Live View in Multiple Monitors ............................... 83

19.3 Controlling PTZ Cameras ........................................................... 84

19.3.1 PTZ Presets.................................................................. 85

19.3.2 PTZ Tours..................................................................... 86

19.3.3 PTZ Pattern .................................................................. 87

19.3.4 PTZ Scan ..................................................................... 88

19.3.5 PTZ Pan....................................................................... 88

19.4 Playback................................................................................. 88

19.5 Playback Controls ..................................................................... 90

19.6 Downloading Video to your Computer Hard Drive............................. 91

19.7 Alarm ..................................................................................... 92

19.8 Log........................................................................................ 93

19.9 E-map .................................................................................... 94

19.10 Devices .................................................................................. 96

19.11 Device Config .......................................................................... 97

19.12 Alarm CFG .............................................................................. 97

19.13 Tour & Task ........................................................................... 100

19.14 Account ................................................................................ 101

19.14.1 Managing User Accounts ............................................... 101

19.14.2 Managing Roles........................................................... 103

19.15 General ................................................................................ 104

19.15.1 Basic ......................................................................... 104

19.15.2 File ........................................................................... 104

19.15.3 Alarm Prompt .............................................................. 105

19.15.4 Version ...................................................................... 106

20 Connecting to your System Using Smartphone or Tablet Apps.............. 107

20.1 iPhone.................................................................................. 107

#LX400051; r. 1.0/23100/23101; en-US

vii

Table of contents

20.1.1 Prerequisites............................................................... 107

20.1.2 Connecting to your System on iPhone............................... 107

20.1.3 Live View Interface ....................................................... 108

20.1.4 Controlling PTZ Cameras............................................... 109

20.1.5 Viewing Snapshots and Videos with Local Files .................. 110

20.1.6 Using Playback Mode on iPhone ..................................... 111

20.1.7 Enabling Push Notifications ............................................ 112

20.1.8 Using the Event List ...................................................... 114

20.1.9 Using Favorites............................................................ 115

20.1.10 Using the E-Map .......................................................... 116

20.1.11 Device Manager........................................................... 118

20.1.12 Adding Devices Using an IP or DDNS Address

(Advanced) ................................................................. 119

20.2 iPad ..................................................................................... 121

20.2.1 Prerequisites............................................................... 121

20.2.2 Connecting to your system on an iPad .............................. 121

20.2.3 Live View Interface ....................................................... 122

20.2.4 Controlling PTZ Cameras............................................... 123

20.2.5 Using Playback Mode on iPad......................................... 124

20.2.6 Using Local File to View Manual Recordings ...................... 126

20.2.7 Enabling Push Notifications ............................................ 127

20.2.8 Using the Event List ...................................................... 129

20.2.9 Using Favorites............................................................ 130

20.2.10 Using the E-Map .......................................................... 131

20.2.11 Using the Device Manager ............................................. 133

20.2.12 Adding Devices Using an IP or DDNS Address

(Advanced) ................................................................. 133

20.3 Android ................................................................................ 136

20.3.1 Prerequisites............................................................... 136

20.3.2 Connecting to your System on Android ............................. 136

20.3.3 Live View Interface ....................................................... 137

20.3.4 Controlling PTZ Cameras............................................... 138

20.3.5 Viewing Snapshots and Videos with Local Files .................. 139

20.3.6 Using Playback Mode on Android .................................... 139

20.3.7 Enabling Push Notifications ............................................ 141

20.3.8 Using the Event List ...................................................... 142

20.3.9 Using Favorites............................................................ 142

20.3.10 Using the E-Map .......................................................... 144

20.3.11 Device Manager........................................................... 145

20.3.12 Adding Devices Using an IP or DDNS Address

(Advanced) ................................................................. 146

21 DDNS Setup (Advanced) .................................................................. 148

21.1 Accessing your System within a Local Network (LAN) ..................... 148

21.1.1 Step 1 of 3: Connect your System to Your Router ................ 148

21.1.2 Step 2 of 3: Obtain the System’s Local IP Address ............... 149

21.1.3 Step 3 of 3: Connect to the System’s Local IP

Address ..................................................................... 149

21.2 DDNS Setup—Access your System Remotely over the

Internet................................................................................. 151

21.2.1 Step 1 of 4: Port Forwarding ........................................... 152

21.2.2 Step 2 of 4: Create a DDNS Account ................................ 152

#LX400051; r. 1.0/23100/23101; en-US

viii

Table of contents

21.2.3 Step 3 of 4: Enable DDNS on the System .......................... 153

21.2.4 Step 4 of 4: Connect to the System’s DDNS Address ........... 154

22 RTSP Streaming (Advanced)............................................................. 158

23 Connecting a PTZ Camera (M3200 / M4200 SERIES) ............................ 160

23.1 Controlling a PTZ Camera (Local DVR)........................................ 160

23.2 Advanced PTZ Controls ........................................................... 161

23.2.1 Presets ...................................................................... 162

23.2.2 Tours ......................................................................... 162

23.2.3 Pattern....................................................................... 163

23.2.4 Auto Scan .................................................................. 163

24 M3200 / M4200 SERIES Hard Drive Installation.................................... 165

24.1 Installing a Hard Drive.............................................................. 165

24.2 Removing the Hard Drive.......................................................... 166

24.3 Formatting Hard Drives ............................................................ 167

25 Troubleshooting .............................................................................. 169

26 M3200 Series System Specifications ................................................. 171

27 M4200 Series System Specifications ................................................. 174

28 Notices........................................................................................... 177

28.1 FCC/IC Notice........................................................................ 177

28.2 Modification........................................................................... 177

28.3 ROHS .................................................................................. 177

#LX400051; r. 1.0/23100/23101; en-US

ix

Important Safeguards

1

In addition to the careful attention devoted to quality standards in the manufacturing proc-

ess of your product, safety is a major factor in the design of every instrument. However,

safety is your responsibility too. This sheet lists important information that will help to en-

sure your enjoyment and proper use of the product and accessory equipment. Please read

them carefully before operating and using your product.

1.1 General Precautions

1. All warnings and instructions in this manual should be followed.

2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents.

Use a water-dampened cloth for cleaning.

3. Do not use this product in humid or wet places.

4. Keep enough space around the product for ventilation. Slots and openings in the stor-

age cabinet should not be blocked.

5. It is highly recommended to connect the product to a surge protector to protect from

damage caused by electrical surges. It is also recommended to connect the product to

an uninterruptible power supply (UPS), which has an internal battery that will keep the

product running in the event of a power outage.

CAUTION

Maintain electrical safety. Power line operated equipment or accessories connected to this product

should bear the UL listing mark or CSA certification mark on the accessory itself and should not be modi-

fied so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or

fire. If in doubt, contact qualified service personnel.

1.2 Installation

1. Read and Follow Instructions - All the safety and operating instructions should be

read before the product is operated. Follow all operating instructions.

2. Retain Instructions - The safety and operating instructions should be retained for fu-

ture reference.

3. Heed Warnings - Comply with all warnings on the product and in the operating

instructions.

4. Polarization - Do not defeat the safety purpose of the polarized or grounding-type

plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

#LX400051; r. 1.0/23100/23101; en-US

1

Important Safeguards

1

5. Power Sources - This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power supplied to your

location, consult your video dealer or local power company. For products intended to

operate from battery power, or other sources, refer to the operating instructions.

6. Overloading - Do not overload wall outlets or extension cords as this can result in the

risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power

cords, damaged or cracked wire insulation, and broken plugs are dangerous. They

may result in a shock or fire hazard. Periodically examine the cord, and if its appear-

ance indicates damage or deteriorated insulation, have it replaced by your service

technician.

7. Power-Cord Protection - Power supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them. Pay particular

attention to cords at plugs, convenience receptacles, and the point where they exit

from the product.

8. Surge Protectors - It is highly recommended that the product be connected to a

surge protector. Doing so will protect the product from damage caused by power

surges. Surge protectors should bear the UL listing mark or CSA certification mark.

9. Uninterruptible Power Supplies (UPS) - Because this product is designed for con-

tinuous, 24/7 operation, it is recommended that you connect the product to an uninter-

ruptible power supply. An uninterruptible power supply has an internal battery that will

keep the product running in the event of a power outage. Uninterruptible power sup-

plies should bear the UL listing mark or CSA certification mark.

10. Ventilation - Slots and openings in the case are provided for ventilation to ensure reli-

able operation of the product and to protect it from overheating. These openings must

not be blocked or covered. The openings should never be blocked by placing the prod-

uct on a bed, sofa, rug, or other similar surface. This product should never be placed

near or over a radiator or heat register. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper ventilation is provided and the

product manufacturer’s instructions have been followed.

11. Attachments - Do not use attachments unless recommended by the product manu-

facturer as they may cause a hazard.

12. Water and Moisture - Do not use this product near water — for example, near a bath

tub, wash bowl, kitchen sink or laundry tub, in a wet basement, near a swimming pool

and the like.

13. Heat - The product should be situated away from heat sources such as radiators, heat

registers, stoves, or other products (including amplifiers) that produce heat.

14. Accessories - Do not place this product on an unstable cart, stand, tripod, or table.

The product may fall, causing serious damage to the product. Use this product only

with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold

with the product. Any mounting of the product should follow the manufacturer’s instruc-

tions and use a mounting accessory recommended by the manufacturer.

15. Camera Extension Cables – Check the rating of your extension cable(s) to verify

compliance with your local authority regulations prior to installation.

16. Mounting - The cameras provided with this system should be mounted only as in-

structed in this guide or the instructions that came with your cameras, using the pro-

vided mounting brackets.

#LX400051; r. 1.0/23100/23101; en-US

2

Important Safeguards

1

17. Camera Installation - Cameras are not intended for submersion in water. Not all cam-

eras can be installed outdoors. Check your camera environmental rating to confirm if

they can be installed outdoors. When installing cameras outdoors, installation in a

sheltered area is required.

1.3 Service

1. Servicing - Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

2. Conditions Requiring Service - Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product has been dropped or the cabinet has been damaged

• If the product does not operate normally by following the operating instructions. Ad-

just only those controls that are covered by the operating instructions. Improper ad-

justment of other controls may result in damage and will often require extensive

work by a qualified technician to restore the product to its normal operation.

• When the product exhibits a distinct change in performance. This indicates a need

for service.

3. Replacement Parts - When replacement parts are required, have the service techni-

cian verify that the replacements used have the same safety characteristics as the orig-

inal parts. Use of replacements specified by the product manufacturer can prevent fire,

electric shock, or other hazards.

4. Safety Check - Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks recommended by the manufacturer to de-

termine that the product is in safe operating condition.

1.4 Use

1. Cleaning - Unplug the product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

2. Product and Cart Combination - When product is installed on a cart, product and

cart combination should be moved with care. Quick stops, excessive force, and un-

even surfaces may cause the product and cart combination to overturn.

3. Object and Liquid Entry - Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or “short-out” parts that could

result in a fire or electric shock. Never spill liquid of any kind on the product.

4. Lightning - For added protection of this product during a lightning storm, or when it is

left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the product due

to lightning and power line surges.

#LX400051; r. 1.0/23100/23101; en-US

3

M3200 Series Features

2

Features

• 720p @ Real-time (30/25fps per channel)

• Supports 2.0 MP (1080p @ 15fps per channel)

• See double the detail of 960H

• Supports MPX HD cameras and standard analog cameras

• Ideal for retrofit using existing coax cable

• Easy, Secure Cloud connection

• Zero video latency

• Cabling up to 2300 ft. (700m)

• Duplex transmission for camera control (PTZ, focus, alarm trigger)

• FLIR DDNS service option

• H.264 video compression

• HDMI/VGA simultaneous video output

• Supports audio transmission, 4 Audio In / 1 Out

• Supports 2x HDD up to 4TB (8TB total), 2x USB 2.0 ports

• RS-485 supports Pelco D & P PTZ

• Drive mirroring to second internal HDD

#LX400051; r. 1.0/23100/23101; en-US

4

M4200 Series Features

3

Features

• Supports 2.1 MP (1080p @ 30/25fps per channel)

• Full HD 1080P recording provides the most detailed picture

• Supports MPX HD cameras and standard analog cameras

• Ideal for retrofit using existing coax cable

• Easy, Secure Cloud connection

• Zero video latency

• Cabling up to 2300 ft. (700m)

• Duplex transmission for camera control (PTZ, focus, alarm trigger)

• FLIR DDNS service option

• H.264 video compression

• HDMI/VGA simultaneous video output

• Supports audio transmission, 4 Audio In / 1 Out

• Supports 2x HDD up to 4TB (8TB total), 2x USB 2.0 ports

• RS-485 supports Pelco D & P PTZ

• Drive mirroring to second internal HDD

#LX400051; r. 1.0/23100/23101; en-US

5

Getting Started (M3200 / M4200

SERIES)

4

The system comes with the following components:

DVR (Digital Video Recorder)

12V DC power supply + power

cable

Remote control

(may not be exactly as shown)

USB mouse Ethernet cable

Quick start guides

Hard drive size, number of channels, and camera configuration may vary by model. Please

refer to your package for specific details. Check your package to confirm that you have re-

ceived the complete system, including all components shown above.

#LX400051; r. 1.0/23100/23101; en-US

6

Series Front Panel (M3200 /

M4200 SERIES)

5

5.1 M3200 / M4200 Series

1. USB Port: Connect a USB mouse (included) or connect a USB flash drive (not in-

cluded) for data backup or firmware upgrades.

2. IR: Not supported.

3. Channel Indicators: Glow when camera is connected to the corresponding channel.

4. Playback Controls:

•

Pause/Play: In live view, press to enter playback mode. Press to play/pause

playback.

•

Reverse: Press to reverse playback/pause playback.

•

Fast: Press to increase playback speed.

•

Next: Press to skip to next video.

•

Previous: Press to skip to previous video.

•

Slow: Press for slow playback.

5. Function Buttons:

• REC: Press to open manual recording controls.

• FN: Performs special functions in some menus.

• SHIFT: During text input, press to switch input types.

• ESC: In menus, press to go back / exit menus. In playback, press to return to live

view.

6. Directional Buttons:

• ENTER: From live view, press once to open the System Information screen; press

twice to open the Main Menu. In menus, press to confirm menu options.

• Directional Buttons: Press to move cursor in menus. In live view, press up to

change split screen layout; press left / right to select channels when single-channel

mode is selected.

7. Power Button: Press and hold to power off the system. Press to power the system

back on.

#LX400051; r. 1.0/23100/23101; en-US

7

Series Front Panel (M3200 / M4200 SERIES)

5

8. IR Receiver and LED Indicators: IR receiver for the remote control. Keep the IR re-

ceiver clear from obstructions.

LED Indicators:

• POWER: Glows to indicate the system is on.

• HDD: Glows to indicate hard drive is in normal state. Turns off when there is a hard

drive error.

• NET: Glows when network is in normal state. Turns off for network error.

#LX400051; r. 1.0/23100/23101; en-US

8

Rear Panel (M3200 / M4200

SERIES)

6

6.1 M3200 Series

M3204 (4–Channel)

M3208 (8–Channel)

1. On / Off switch: Turns the DVR on or off.

2. Alarm IO: Connect alarm/sensor devices (not included).

3. DC12V: Connect the included AC power adapter.

4. A/B: Connect RS485 cables for PTZ cameras (not included).

5. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

6. RS232: Serial connection for PTZ keyboard (not included).

7. VGA: Connect a VGA monitor (not included) to view the system interface.

8. USB port(s): Connect a USB mouse (included) or USB flash drive (not included) for

data backup or firmware updates.

9. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.

10. Audio OUT: RCA audio output.

11. Audio IN: RCA audio input for up to 4 channels.

12. Video input: Connect FLIR MPX or analog cameras to the system.

M3216 (16–Channel)

1. Alarm IO: Connect alarm/sensor devices.

2. A/B: Connect RS485 cables for PTZ cameras (not included).

3. DC12V: Connect the included AC power adapter.

4. On / Off switch: Turns the DVR on or off.

5. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

6. RS232: Serial connection for PTZ keyboard (not included).

7. VGA: Connect a VGA monitor (not included) to view the system interface.

#LX400051; r. 1.0/23100/23101; en-US

9

Rear Panel (M3200 / M4200 SERIES)

6

8. USB port(s): Connect a USB mouse (included) or USB flash drive (not included) for

data backup or firmware updates.

9. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.

10. Audio OUT: RCA audio output.

11. Audio IN: RCA audio input for up to 4–channels.

12. Video input: Connect FLIR MPX or analog cameras.

6.2 M4200 Series

M4204 (4–Channel)

1. On / Off switch: Turns the DVR on or off.

2. Alarm IO: Connect alarm/sensor devices.

3. DC12V: Connect the included AC power adapter.

4. A/B: Connect RS485 cables for PTZ cameras (not included).

5. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

6. RS232: Serial connection for PTZ keyboard (not included).

7. VGA: Connect a VGA monitor (not included) to view the system interface.

8. USB port(s): Connect a USB mouse (included) or USB flash drive (not included) for

data backup or firmware updates.

9. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.

10. Audio OUT: RCA audio output.

11. Audio IN: RCA audio input for up to 4 channels.

12. Video input: Connect FLIR MPX or analog cameras to the system.

M4208 (8–Channel)

1. Alarm IO: Connect alarm/sensor devices.

2. A/B: Connect RS485 cables for PTZ cameras (not included).

3. DC12V: Connect the included AC power adapter.

4. On / Off switch: Turns the DVR on or off.

5. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.

6. RS232: Serial connection for PTZ keyboard (not included).

7. VGA: Connect a VGA monitor (not included) to view the system interface.

8. USB port(s): Connect a USB mouse (included) or USB flash drive (not included) for

data backup or firmware updates.

9. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.

10. Audio OUT: RCA audio output.

11. Audio IN: RCA audio input for up to 4–channels.

#LX400051; r. 1.0/23100/23101; en-US

10

Page is loading ...

FLIR M4200 - M4200P Series User manual

FLIR M4200 - M4200P Series User manual

Related papers

Other documents