Fortin EVO-ALL User guide

BATTERY

NOT

USED

This diagram was made to show you how to add the A-DS-101

shock sensor to a single wire input on an EVO-ALL or EVO-ONE.

You will need to turn option “G” on in the flashlink manager to

activate the alarm features of the EVO products. Then you will need

document guide #12971 to show you what additional wires are used

for the alarm wiring.

Following the diagram below will show you how to connect the

A-DS-101 to the EVO product.

RED Wire: 12 Volts Constant

Black Wire: Ground

White Wire: Not Used

Green Wire: Trigger Output

NOT

USED

PurplePurple

Green

White

Black

A-DS-101

RED Wire: 12 Volts Constant

Black Wire: Ground

Purple Wire: External Trigger Input

EVO-ALL