Big Buon Phone
Instrucon Manual
EASY TO
READ BIG
BUTTONS
10 TWO TOUCH
NUMBER
MEMORY
ADJUSTABLE
VOLUME
DESK/WALL
MOUNTABLE
HANDS FREE
SPEAKERPHONE
If you need any help, please contact us at kar[email protected]
1
We are looking forward to serving you again in near future.
Thanks again for your support and time, dear.
Wish you and your family a wonderful day!
Dear Valued Customer
Thanks very much for your business! We hope you're happy
with our products as well as our service.
If you have any problems (about products, refund or return),
please contact us first. We are always here for you and will
provide you the satisfactory solutions tolet you have a great
shopping experience.
Welcome To Contact Us
Customer Service Email: [email protected]
We aim to provide the high quality products and the best
service to our valued customers. And we will be appreciate
if you can leave us your feedback to share your opinions on
our products.
If you need any help, please contact us at kar[email protected]
2
FEATURE LIST:
- Hands-free Speakerphone with Volume Control
- Handset Volume Control
- Ringer Volume Control
- 10-Two Touch Speed Dial Memories
- Last Number Redial
- In Use Indicator and Ringer Indicator
- Flash Function
- Hold on Music Function
- Tole/Pulse Dial Mode Selectable
- Desktop/Wall Mounting
LOCATION OF CONTROLS:
1. AUTO Button 2. STORE Button 3. HOLD Button
4. SP-PHONE Volume 5. FLASH Button 6. REDIAL Button
7. SP-PHONE Button 8. RINGER Indicator 9.RINGER Volume
10. HANDSET Volume 11. Tole/Pulse Control
If you need any help, please contact us at kar[email protected]
3
1. AUTO Button 2. STORE Button 3. HOLD Button
4. SP-PHONE Volume 5. FLASH Button 6. REDIAL Button
7. SP-PHONE Button 8. RINGER Indicator 9.RINGER Volume
10. HANDSET Volume 11. Tole/Pulse Control
INSTALLATION
1. Connect the coiled cord to handset and the telephone base.
2. Connect the telephone wire to the telephonebase and wall jack.
Please pick up the handset and you will hear the dial tone, that
means the phone is ready for use. If not, please re-connect the
phone line and make sure they are inserted in the correct jack.
Please Note: This phone is powered by the telephone line. It will
work after you complete the above 2 steps. No need any batteries
or DC power. It still works when power outage in the house.
If you need any help, please contact us at kar[email protected]
RINGER VOLUME HI/LO SWITCH
To control the volume of the Ringer.
SP-PHONE VOLUME HI/LO SWITCH
To control the volume of the handsfree speakerphone.
HANDSET VOLUME HI/LO SWITCH
To control the volume of the handset.
RINGER INDICATOR
LED will flash when a call comes in.
OPERATION
4
If you need any help, please contact us at kar[email protected]
IN USE INDICATOR
Led will be bright when the phone is in use.
RECEIVING A CALL
1. Pick up the handset or press “SP-PHONE” button when the phone
rings.
2. When you finish the phone call, put the handset back on the phone
base or press “SP-PHONE” button again.
MAKING A CALL
1. Pick up the handset or press “SP-PHONE” button to hear a dialing
tone.
2. Dial the number you want to call.
3. Hang up the handset or press “SP-PHONE” button again if you
finish the conversation.
LAST NUMBER REDIAL FUNCTION
Pick up the handset or press the “SP-PHONE” button, then press
“REDIAL” button when you hear the dialing tone.
FLASH FUNCTION
If you have subscribed to a call waiting service, the flash button
replaces the hook allowing you to take the next call.
MUSIC ON HOLD
5
If you need any help, please contact us at kar[email protected]
1. When talking on the phone, press HOLD button once. The caller
will hear the music from your phone set, and your phone set is in a
holding stateput the handset back on the phone base .
2. To continue the phone call, just pick up the handset or press
SP-PHONE button once again.
TO STORE PHONE NUMBERS FOR SPEED DIAL
1. With the handset off the hook, press STORE button and then
enter the phone number you want to store
2. Press STORE button and then press (0-9) button for number
location
3. Replace the handset. When you have finished these steps, this
phone number willhave been stored.
TO SPEED DIAL FROM STORED NUMBER
1. Pick up handset (or press SP-PHONE button);
2. Press AUTO and press the correct memory location (0-9)Then
the telephone number will be automatically dialed out.
TOLE/PULSE DIAL MODE SELECTABLE
1.“P” is the pulse dialing
2.“T” is the dual tone multiple frequencydialing
Please Note: Because the most of the switchboard is dual tone
multiple frequency dialing. So, please adjust the P/T button on the
6
If you need any help, please contact us at kar[email protected]
“T” side. If the phone doesn’t work on T
side, please adjust P/T
button on the “P” side
WALL MOUNTABLE
When use it as wall-mounted, put the handset aside, slide the
adjustable hook upwards to remove it from the slot. Rotate the
adjustable hook by 180 degrees, then replace the adjustable
hook into the slot until it locks into position. The handset will
can stay on the phone base.
Remove the filled sponge from the Hanging hole on the bottom of
the telephone base. Align the holes with the wall-mounting plate,
then slide the telephone base down until it locks securely. Replace
the handset in the telephone base.
7
IMPORTANT NOTES
Telephone connections
The voltage on the network is classified as TNV-3
(Telecommunication Network Voltages, as defined in the standard
EN60950). Following a power cut, the call in progress .
Safety precautions
- Do not allow the handset to come into contact with liquids or
moisture.
- Do not open the handset or base unit. This could expose you to
high voltages.
- There is a slight chance that your product could be damaged by an
electrical storm. We recommend that you unplug the product from
the telephone socket during a storm.
- Do not use the handset in an explosive hazard area such as where
there is gas leaking.
- It is recommended that this product is not used near intensive care
medical equipments or by persons with pacemakers.
- This product can interfere with electrical equipment such as
answering machine, television, radio and computers if placed
tooclose. We recommend that you position the base unit at least one
meter from suchappliances.
If you need any help, please contact us at kar[email protected]
557 说明书 105X165mm,
128g双铜，
正反面单黑印刷，8P(折叠成册)
IN USE INDICATOR
Led will be bright when the phone is in use.
RECEIVING A CALL
1. Pick up the handset or press “SP-PHONE” button when the phone
rings.
2. When you finish the phone call, put the handset back on the phone
base or press “SP-PHONE” button again.
MAKING A CALL
1. Pick up the handset or press “SP-PHONE” button to hear a dialing
tone.
2. Dial the number you want to call.
3. Hang up the handset or press “SP-PHONE” button again if you
finish the conversation.
LAST NUMBER REDIAL FUNCTION
Pick up the handset or press the “SP-PHONE” button, then press
“REDIAL” button when you hear the dialing tone.
FLASH FUNCTION
If you have subscribed to a call waiting service, the flash button
replaces the hook allowing you to take the next call.
MUSIC ON HOLD
/
