Perfect aire PAU1 User manual

Brand
Perfect aire
Model
PAU1
Type
User manual
Please check the following troubleshooting tips before calling for assistance.
PROBLEM REASON SOLUTION
Power light
PZVɈ
Unit not plugged in.
Plug in unit and turn on the power / output
adjustment knob.
Wall outlet has no power. Check circuit and fuse; try another socket.
Check power cord.
If damaged, call Consumer Services at
844-4PA-AIRE (844-472-2473)
Unit / Mist has
peculiar smell
New unit.
Air unit out in cool place for 12 hours
without the tank on the unit.
The water is dirty or stale.
Thoroughly clean unit and place fresh water
in bottle (tank).
Excessive
noise
Vibration between the
O\TPKPÄLYHUKZ\YMHJL
Place the unit on a stable,
waterproof surface.
Low water level in water tank.
Fill the water tank.
White dust
Water contains high
mineral content.
:^P[JO[VKPZ[PSSLKVYÄS[LYLK^H[LY"JSLHU
nebulizer according to instructions.
Damp table
VYÅVVY
Unit too far from end of table
VY[VVJSVZL[VÅVVY
Move unit closer to edge of table so mist
has more time to disperse. Do not place
\UP[VUÅVVY
)HZLV]LYÅV^LK
Water bottle adaptor not securely attached
or needs replacement.
No mist /
Little mist /
Mist stuck
)HZLV]LYÄSSLK Empty base and restart.
No water in the water bottle. Add water to the water bottle.
The power / output
adjustment knob is not
turned on.
Rotate the power / output adjustment knob
clockwise to power the unit on.
<UP[PZUV[VUHÅH[Z\YMHJL 7\[[OLO\TPKPÄLYVUHÅH[Z\YMHJL
There is scaling on the
nebulizer / transducer.
Clean the nebulizer / transducer according
to instructions.
The water level is too low.
Add water to the water tank or replace it
^P[OHUV[OLYÄSSLK^H[LYIV[[SL
The water is dirty or stale.
Thoroughly clean unit and place fresh water
in bottle (tank).
The nebulizer / transducer or
fan does not work.
Call Perfect Aire Consumer Services:
844-4PA-AIRE (844-472-2473)
Condensation
on windows
or machine
The room is too small or
too humid.
Turn down the mist volume or turn the unit
VɈJVTWSL[LS`
Scaling on
nebulizer /
transducer
Water is too hard.
<ZLKPZ[PSSLKVYÄS[LYLK^H[LY-VSSV^
cleaning instructions in this manual.
Mist circling in
base but not
coming out of
the nozzle
Too much water in base.
Empty base. Trim ring from neck of water bottle
if necessary. Leave space for air in bottle.
Water bottle brand not
compatible with unit.
;Y`HKPɈLYLU[IYHUKVM^H[LYIV[[SL
NOTE: A highly recommended troubleshoot for any issue in general consists of removing the
^H[LYIV[[SLLTW[`PUN[OLIHZLHUK[Y`PUNHKPɈLYLU[IYHUKVM^H[LYIV[[SLHZ[OL\UP[PZ
compatible with most, but not all, 20 oz. plastic water bottles.
After reviewing the above troubleshooting tips, should you have any questions or concerns,
please call Consumer Services at 844-4PA-AIRE (844-472-2473).
Please check the following troubleshooting tips before calling for assistance.
PROBLEM REASON SOLUTION
Power light
PZVɈ
Unit not plugged in.
Plug in unit and turn on the power / output
adjustment knob.
Wall outlet has no power. Check circuit and fuse; try another socket.
Check power cord.
If damaged, call Consumer Services at
844-4PA-AIRE (844-472-2473)
Unit / Mist has
peculiar smell
New unit.
Air unit out in cool place for 12 hours
without the tank on the unit.
The water is dirty or stale.
Thoroughly clean unit and place fresh water
in bottle (tank).
Excessive
noise
Vibration between the
O\TPKPÄLYHUKZ\YMHJL
Place the unit on a stable,
waterproof surface.
Low water level in water tank.
Fill the water tank.
White dust
Water contains high
mineral content.
:^P[JO[VKPZ[PSSLKVYÄS[LYLK^H[LY"JSLHU
nebulizer according to instructions.
Damp table
VYÅVVY
Unit too far from end of table
VY[VVJSVZL[VÅVVY
Move unit closer to edge of table so mist
has more time to disperse. Do not place
\UP[VUÅVVY
)HZLV]LYÅV^LK
Water bottle adaptor not securely attached
or needs replacement.
No mist /
Little mist /
Mist stuck
)HZLV]LYÄSSLK Empty base and restart.
No water in the water bottle. Add water to the water bottle.
The power / output
adjustment knob is not
turned on.
Rotate the power / output adjustment knob
clockwise to power the unit on.
<UP[PZUV[VUHÅH[Z\YMHJL 7\[[OLO\TPKPÄLYVUHÅH[Z\YMHJL
There is scaling on the
nebulizer / transducer.
Clean the nebulizer / transducer according
to instructions.
The water level is too low.
Add water to the water tank or replace it
^P[OHUV[OLYÄSSLK^H[LYIV[[SL
The water is dirty or stale.
Thoroughly clean unit and place fresh water
in bottle (tank).
The nebulizer / transducer or
fan does not work.
Call Perfect Aire Consumer Services:
844-4PA-AIRE (844-472-2473)
Condensation
on windows
or machine
The room is too small or
too humid.
Turn down the mist volume or turn the unit
VɈJVTWSL[LS`
Scaling on
nebulizer /
transducer
Water is too hard.
<ZLKPZ[PSSLKVYÄS[LYLK^H[LY-VSSV^
cleaning instructions in this manual.
Mist circling in
base but not
coming out of
the nozzle
Too much water in base.
Empty base. Trim ring from neck of water bottle
if necessary. Leave space for air in bottle.
Water bottle brand not
compatible with unit.
;Y`HKPɈLYLU[IYHUKVM^H[LYIV[[SL
NOTE: A highly recommended troubleshoot for any issue in general consists of removing the
^H[LYIV[[SLLTW[`PUN[OLIHZLHUK[Y`PUNHKPɈLYLU[IYHUKVM^H[LYIV[[SLHZ[OL\UP[PZ
compatible with most, but not all, 20 oz. plastic water bottles.
After reviewing the above troubleshooting tips, should you have any questions or concerns,
please call Consumer Services at 844-4PA-AIRE (844-472-2473).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Perfect aire PAU1 User manual

Brand
Perfect aire
Model
PAU1
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents