Assembly and Installation Instructions
2. Fold end down: snap
sides and bottom. Prior
to installation, remove all
debris from your entire
gutter and downspout
system
Thank you for purchasing the Wedge
Downspout Gutter Guard, the most
economical Made In U.S.A. gutter
guard solution.
The Wedge fits into standard gutte
with a minimum width of 2.7" (7 cm)
with a 2" x 3" downspout opening.
Videos and more info available:
-
1
The Wedge P-210-HD-4-ST Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Amerimax none User manual
-
Trex RE3012 Installation guide
-
none 0099 Installation guide
-
Unbranded 2507519 Operating instructions
-
Unbranded 44002025120 Operating instructions
-
RainTight Decks PNL-1-16-64 Installation guide
-
Rescue 2263-1 User manual
-
Rescue 2234-1 User manual
-
PRIVATE BRAND UNBRANDED OG5SCWHA Installation guide
-
InvisaFlow 4600 Installation guide
