2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Toro
  7. Rock Stakes, 2226 Directional Drill
Rock Stakes, 2226 Directional Drill

Toro Rock Stakes, 2226 Directional Drill, Dirt Stakes, 2226 Directional Drill Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Rock Stakes, 2226 Directional Drill Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3418-572RevA
DirtandRockStakes
2226DirectionalDrill
ModelNo.23840
ModelNo.23840E
ModelNo.23934
ModelNo.23934E
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
tocausecancer,birthdefects,orreproductiveharm.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Dirtstakes2
Stakepin
2
O-ring
2
Installthedirtstakes.
Rockstakes2
Stakeguide
2
SpacerPlate
2
Bolts8
Nuts8
Installtherockstakes.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3418-572*A
InstallingtheDirtStakes
PreparingtheMachineand
RemovingtheCurrentStakes
Note:Having2peopleoraliftingmechanismmakes
iteasiertoinstallthestakes.
1.Movethemachinetoalevelsurface.
2.Positionthethrustframe25.4cm(12inches)off
theground,withthestakesintheupposition.
3.Turnthebatterydisconnectswitchtotheoff
position.
4.Whileholdingthestakes,removetheO-rings
andpinssecuringthestakestothemotors
(Figure1).
g030430
Figure1
1.Motor
3.PinandO-ring
2.Coupler4.Stake
5.Removetheexistingstakes.
6.Pumpgreaseintothettingsuntilgreasebegins
tooozeoutofthebearings(approximately3
pumps)andwipeupanyexcessgrease.
InstallingtheDirtStakes
Installthenewstakesbyaligningtheholeinthestake
withtheholeinthemotorcouplerandsecureitwith
theO-ringsandpinsincludedinthiskit(Figure2).
g030428
Figure2
Rockstakesshownforillustrativepurposesonly.
1.Coupler3.O-ring
2.Pin
4.Stake
2
InstallingtheRockStakes
PreparingtheMachineand
RemovingtheCurrentStakes
Note:Having2peopleoraliftingmechanismmakes
iteasiertoinstallthestakes.
1.Movethemachinetoalevelsurface.
2.Positionthethrustframe25.4cm(12inches)off
theground,withthestakesintheupposition.
3.Turnthebatterydisconnectswitchtotheoff
position.
4.Supportthefootwithajackstandorequivalent.
5.Whileholdingthestakes,removethepinsand
e-clipssecuringthestakestothemotors(Figure
1).
6.Removetheexistingstakes.
InstallingtheRockStakes
Have2peopleperformthisprocedure.
1.Slidethestakeguideandspacerplateoverthe
topoftherockstakeasshowninFigure3.
Note:Have1personholdthestakeinplace
whiletheotherpersoncontinuesthisprocedure.
g231544
Figure3
2.PlacetheO-ringoverthestakeandplacethe
stakeonthemachineasshowninFigure3and
Figure4.
3
g231545
Figure4
3.Aligntheholeinthestakewiththeholeinthe
motorandsecureitwiththepinandO-ring
(Figure4andFigure5).
g231546
Figure5
4.Securethestakeguideandspacertothe
platformusing8boltsand8nuts.
5.Torquetheboltto37to45N∙m(27to33ft-lb).
4
/