IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
Place PTO (Blade
Engage) Lever in
Off position.
Pull Choke up to full choke position.
Insert key and turn to Start position.
Release after engine starts.
Move Control Levers
out to neutral position.
Engage Parking
Brake Lever.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
778-10669B© 2006 17AA5ABP766 17AA5AAG766
Is the battery connected? Fresh gas in the unit?
See Operator’s Manual for additional troubleshooting tips.
Stopping the Unit
N
O
F
FO
K
R
AP
E
K
A
R
B
P
Move Throttle to
Rabbit (fast) position.
Didn’t Start?
Put PTO (blade engage) lever in the Off position.
Move Throttle Control Lever to
Turtle (slow) position.
Move Drive Control levers to neutral position.
Engage Parking Brake.
Throttle
PTO Switch
Ignition
Switch
Drive
Control
Lever
Choke
Deck Lift
Lever
Parking
Brake
Turn key counterclockwise to
Stop position and remove.
-
1
Troy-Bilt 17AA5AAG766 Fast Start Guide
- Type
- Fast Start Guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI