IBM System Storage DS3000 Interoperability Matrix - 3 -
Important Disclaimer Information
The following compatibility/interoperability information provided by IBM should be used as a
reference guide only, because hardware and software levels and releases may vary, and
numerous hardware and software combinations are possible. IBM makes no representation or
guarantee regarding the compatibility of specific hardware or software products.
THIS INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Unless otherwise specified, warranty, service, and support for non-IBM products are provided
directly to you by the product manufacturer, supplier or publisher of the product. IBM makes no
representations or warranties regarding the non-IBM products. The inclusion of an IBM or non-
IBM product on an interoperability list is not a guarantee that it will work with the designated IBM
storage product. In addition, not all software and hardware combinations created from
compatible components will necessarily function properly together. The following list includes
products developed or distributed by companies other than IBM. IBM does not provide service or
support for the non-IBM products listed, but does not prohibit them from being used together
with IBM's storage products. During problem debug and resolution, IBM may require that
hardware or software additions be removed from the IBM product to provide problem
determination and resolution on the IBM-supplied hardware/software. For support issues
regarding non-IBM products, please contact the manufacturer of the product directly. IBM does
not warrant either functionality or problem resolution of any non-IBM products.
To take full advantage of the constant improvements in the IBM System Storage DS3000 series firmware, you should
upgrade to the latest code levels as soon as it is available. The latest code levels are available by selecting the Product
Support link from the appropriate DS3000 series model page located at:
http://www-1.ibm.com/servers/storage/disk/index.html
For specific Operating System support on your server, refer to IBM Server Proven at:
www-03.ibm.com/servers/eserver/serverproven/compat/us/
IBM, the IBM logo, the e-business logo, and System x are trademarks of IBM Corporation in the United States and/or
other countries. For a list of additional IBM trademarks, visit: http://www.ibm.com/legal/copytrade.shtml
Microsoft and Windows are trademarks of Microsoft Corporation. Other product, company and service names may be
trademarks or service marks of others.
Linux is a trademark of Linus Trovalds in the United States, other countries, or both.
Other company, product and service names may be trademarks or service marks of others.
What’s new in the DS3000 Interop Matrix?
11/7/2008 update:
- Sun Solaris Host Support, Solaris multi-pathing, Solaris clustering (see pages 15 - 16)
- Windows HyperV support (see page 16)
- VIOS with IBM i client support with DS3400 (see page 15)
- Operating system and software product currency updates (see pages 15 – 16)
- Support 450 GB SAS HDD (see page 17)
- New 8 and 32 partition options and enhanced FlashCopy option see pages 7 – 8)
- Withdrawal of selected Express Models (see page 6)
7/29/2008 update:
- Added support for new DS3400 Simple SAN Kits: 1726-41S, 1726-42S (see page 6)
7/18/2008 update:
- Added support for DS3200 SAS Controller attached to BladeCenter SAS switch (see pages 9, 10)
- Added DS3400 FC Controller support for new 8 Gb FC HBAs and switches (see page 12, 13 and 14)
- Added new servers and blades: x3950 M2, x3350, x3250 M2, x3200 M2, HS21 XM blade (see page 9)
- Added VMware support with DS3300 iSCSI Controller (see page 15)
- Added GPFS support with DS3400 FC Controller (see page 16)