Netopia R7200 User manual

Netopia

™

R7200 SDSL Router

Nokia Speedlink™ certified

User’s Reference Guide

Copyright

This manual and any associated artwork, software, and product designs are copyrighted with

part, without the prior written consent of Netopia, Inc. Under the law, copying includes

translation to another language or format.

Netopia, Inc.

2470 Mariner Square Loop

Alameda, CA 94501-1010

U.S.A.

Part Number

For additional copies of this electronic manual, order Netopia part number 6160021-PF-02

Printed Copies

For printed copies of this manual, order Netopia part number TER7200/Doc

(P/N 6160021-00-02)

G

B

Part I: Getting Started

Chapter 1 — Introduction..........................................................1-1

Overview....................................................................... 1-1

Features and capabilities ............................................... 1-1

How to use this guide .................................................... 1-2

Chapter 2 — Setting Up Internet Services .................................2-1

Finding an Internet service provider................................. 2-1

Unique requirements............................................ 2-2

Pricing and support.............................................. 2-2

Endorsements ..................................................... 2-2

Deciding on an ISP account............................................ 2-2

Setting up a Netopia R7200 account..................... 2-2

Obtaining an IP address........................................ 2-2

Obtaining information from the ISP.................................. 2-3

Local LAN IP address information to obtain............ 2-3

Chapter 3 — Making the Physical Connections..........................3-1

Find a location............................................................... 3-1

What you need .............................................................. 3-2

Identify the connectors and attach the cables.................. 3-2

Netopia R7200 SDSL Router back panel ports ................ 3-3

Netopia R7200 SDSL Router status lights....................... 3-4

Chapter 4 — Connecting to Your Local Area Network.................4-1

Overview....................................................................... 4-1

Readying computers on your local network....................... 4-1

Connecting to an Ethernet network.................................. 4-3

10Base-T............................................................. 4-4

Welcome to the Netopia R7200 SDSL Router

User’s Reference Guide

. This guide is designed to be

your single source for information about your Netopia R7200 SDSL Router. It is intended to be

viewed on-line, using the powerful features of the Adobe Acrobat Reader. The information display

has been designed to present the maximum information in the minimum space on your screen. You

can keep this document open while you perform any of the procedures described and ﬁnd useful

information about the procedure you are performing.

This Table of Contents page you are viewing consists of hypertext links to the chapters and

headings listed. If you are viewing this on-line, just click any link below to go to that heading.

CC

oo

nn

tt

ee

nn

tt

ss

iv User’s Reference Guide

Adding an external modem ............................................. 4-5

Connecting to a LocalTalk network ................................. 4-6

Chapter 5 — Setting up your Router with the SmartStart Wizard5-1

Before running SmartStart............................................. 5-2

Setting up your Router with the SmartStart Wizard........... 5-3

SmartStart Wizard conﬁguration screens............... 5-3

Easy option.......................................................... 5-4

Advanced option .................................................. 5-5

Sharing the Connection.................................................. 5-6

Conﬁguring TCP/IP on Windows 95, 98, or NT

computers........................................................... 5-6

Conﬁguring TCP/IP on Macintosh computers........ 5-10

Chapter 6 — Console-Based Management.................................6-1

Connecting through a Telnet session............................... 6-2

Conﬁguring Telnet software................................... 6-3

Connecting a console cable to your router ....................... 6-3

Navigating through the console screens .......................... 6-4

Chapter 7 — Easy Setup...........................................................7-1

Easy Setup console screens........................................... 7-1

Accessing the Easy Setup console screens............ 7-1

Quick Easy Setup connection path .................................. 7-3

SDSL Line Conﬁguration ....................................... 7-4

Easy Setup Proﬁle................................................ 7-5

IP Easy Setup ...................................................... 7-6

Easy Setup Security Conﬁguration ......................... 7-7

Part II: Advanced Configuration

Chapter 8 — WAN and System Conﬁguration.............................8-1

WAN conﬁguration.......................................................... 8-1

Creating a new Connection Proﬁle................................... 8-3

The default proﬁle.......................................................... 8-6

Contents v

G

IP parameters (default proﬁle) screen.................... 8-8

IPX parameters (default proﬁle) screen .................. 8-9

System conﬁguration screens ........................................ 8-9

Navigating through the system conﬁguration screens...... 8-10

System conﬁguration features............................. 8-11

Network protocols setup..................................... 8-12

Filter sets (ﬁrewalls)........................................... 8-12

IP address serving ............................................. 8-12

Date and time.................................................... 8-12

Console conﬁguration......................................... 8-13

SNMP (Simple Network Management Protocol)..... 8-14

Security............................................................. 8-14

Upgrade feature set ........................................... 8-14

Logging ............................................................. 8-14

Installing the Syslog client .................................. 8-15

Chapter 9 — Line Backup .........................................................9-1

WAN Conﬁguration ......................................................... 9-2

Backup Conﬁguration screen................................. 9-3

IP Setup screen............................................................. 9-4

Connection Proﬁles........................................................ 9-5

Using Scheduled Connections with Backup...................... 9-5

Management/Statistics.................................................. 9-7

QuickView ..................................................................... 9-9

Event Logs.................................................................... 9-9

SNMP Support .............................................................. 9-9

Chapter 10 — IP Setup and Network Address Translation ........10-1

Network Address Translation features ........................... 10-1

Using Network Address Translation ............................... 10-3

Associating port numbers with nodes.................. 10-6

Advanced IP/IPX router conﬁguration options................. 10-7

Connection Proﬁles...................................................... 10-8

Network Address Translation guidelines............. 10-10

vi User’s Reference Guide

IP setup.................................................................... 10-11

IP subnets....................................................... 10-15

Static routes.................................................... 10-17

IP address serving..................................................... 10-21

IP Address Pools.............................................. 10-24

DHCP NetBIOS Options..................................... 10-26

MacIP (KIP forwarding) setup ............................ 10-28

Chapter 11 — IPX Setup.........................................................11-1

IPX features ................................................................ 11-1

IPX deﬁnitions ............................................................. 11-1

Internetwork Packet Exchange (IPX) ..................... 11-1

IPX address....................................................... 11-2

Socket .............................................................. 11-2

Routing Information Protocol (RIP) ....................... 11-2

Service Advertising Protocol (SAP)....................... 11-2

NetBIOS............................................................ 11-3

IPX spooﬁng....................................................... 11-3

IPX setup screen ......................................................... 11-3

IPX routing tables ........................................................ 11-5

Chapter 12 — AppleTalk Setup................................................12-1

AppleTalk networks...................................................... 12-1

AppleTalk protocol.............................................. 12-1

MacIP................................................................ 12-3

AURP................................................................. 12-3

Routers and seeding .......................................... 12-3

Installing AppleTalk...................................................... 12-4

Conﬁguring AppleTalk................................................... 12-6

EtherTalk setup.................................................. 12-6

LocalTalk setup ................................................. 12-7

AURP setup ....................................................... 12-8

Contents vii

G

Chapter 13 — Monitoring Tools...............................................13-1

Quick View status overview .......................................... 13-1

General status................................................... 13-2

Current status ................................................... 13-3

Status lights...................................................... 13-3

Statistics & Logs......................................................... 13-4

General Statistics .............................................. 13-4

Event histories ............................................................ 13-5

Routing tables............................................................. 13-7

Served IP Addresses.................................................. 13-10

System Information.................................................... 13-12

SNMP....................................................................... 13-12

The SNMP Setup screen................................... 13-13

SNMP traps..................................................... 13-14

Web-based management pages .................................. 13-16

System Information page.................................. 13-16

Event History pages ......................................... 13-17

Chapter 14 — Security ...........................................................14-1

Suggested security measures....................................... 14-1

User accounts............................................................. 14-1

Dial-in console access.................................................. 14-3

Enable SmartStart/SmartView/Web server................... 14-4

Telnet access.............................................................. 14-4

About ﬁlters and ﬁlter sets ........................................... 14-4

What’s a ﬁlter and what’s a ﬁlter set?.................. 14-4

How ﬁlter sets work............................................ 14-5

How individual ﬁlters work................................... 14-6

Design guidelines............................................. 14-11

Working with IP ﬁlters and ﬁlter sets............................ 14-12

Adding a ﬁlter set............................................. 14-13

Viewing ﬁlter sets............................................. 14-16

Modifying ﬁlter sets.......................................... 14-17

viii User’s Reference Guide

Deleting a ﬁlter set........................................... 14-17

A sample IP ﬁlter set........................................ 14-17

IPX ﬁlters .................................................................. 14-21

IPX packet ﬁlters.............................................. 14-22

IPX packet ﬁlter sets ........................................ 14-23

IPX SAP ﬁlters.................................................. 14-25

IPX SAP ﬁlter sets ............................................ 14-27

Firewall tutorial.......................................................... 14-29

General ﬁrewall terms ...................................... 14-29

Basic IP packet components............................. 14-29

Basic protocol types......................................... 14-29

Firewall design rules......................................... 14-30

Filter basics..................................................... 14-33

Example ﬁlters................................................. 14-34

Chapter 15 — Utilities and Diagnostics...................................15-1

Ping............................................................................ 15-2

Trace Route................................................................. 15-4

Telnet client................................................................. 15-5

Disconnect Telnet console session ............................... 15-6

Factory defaults........................................................... 15-6

Transferring conﬁguration and ﬁrmware ﬁles with TFTP.... 15-7

Updating ﬁrmware.............................................. 15-7

Downloading conﬁguration ﬁles ........................... 15-8

Uploading conﬁguration ﬁles ............................... 15-9

Transferring conﬁguration and ﬁrmware ﬁles with

XMODEM..................................................................... 15-9

Updating ﬁrmware............................................ 15-10

Downloading conﬁguration ﬁles ......................... 15-11

Uploading conﬁguration ﬁles ............................. 15-11

Restarting the system................................................ 15-12

Contents ix

G

Part III: Appendixes

Appendix A — Troubleshooting..................................................A-1

Conﬁguration problems .................................................. A-1

Console connection problems ............................... A-2

Network problems................................................ A-2

How to reset the router to factory defaults ...................... A-3

Power outages............................................................... A-3

Technical support .......................................................... A-4

How to reach us................................................... A-4

Appendix B — Understanding IP Addressing ..............................B-1

What is IP?.................................................................... B-1

About IP addressing....................................................... B-1

Subnets and subnet masks .................................. B-2

Example: Using subnets on a Class C IP internet.... B-3

Example: Working with a Class C subnet................ B-5

Distributing IP addresses ............................................... B-5

Technical note on subnet masking......................... B-6

Conﬁguration ....................................................... B-7

Manually distributing IP addresses ........................ B-8

Using address serving.......................................... B-8

Tips and rules for distributing IP addresses............ B-9

Nested IP subnets....................................................... B-11

Broadcasts.................................................................. B-13

Packet header types........................................... B-13

Appendix C — Understanding Netopia NAT Behavior...................C-1

Network conﬁguration..................................................... C-1

Background................................................................... C-1

Exported services ................................................ C-5

Important notes................................................... C-6

Conﬁguration................................................................. C-7

Summary...................................................................... C-8

x User’s Reference Guide

Appendix D — Binary Conversion Table......................................D-1

Appendix E — Further Reading..................................................E-1

Appendix F — Technical Speciﬁcations and Safety Information...F-1

Pinouts for Auxiliary port modem cable............................ F-1

Description.................................................................... F-2

Power requirements ............................................. F-2

Environment ........................................................ F-2

Software and protocols......................................... F-3

Agency approvals........................................................... F-4

Regulatory notices ............................................... F-4

Important safety instructions ................................ F-5

Appendix G — About SDSL........................................................G-1

Glossary..................................................................................GL-1

Index ..................................................................................Index-1

Limited Warranty and Limitation of Remedies ................................1

PP

aa

rr

tt

II

::

GG

ee

tt

ii

nn

gg

SS

tt

aa

rr

tt

ee

dd

User’s Reference Guide

Introduction 1-1

CC

hh

aa

pp

tt

ee

rr

11

II

nn

tt

rr

oo

dd

uu

cc

tt

ii

oo

nn

Overview

The Netopia R7200 SDSL Router is a full-featured, stand-alone, multiprotocol router for connecting diverse local

area networks (LANs) to the Internet and other remote networks. Once your Netopia R7200 SDSL Router is

connected to your computer, and your account is activated by your network service provider, you will have a fast

Symmetric Digital Subscriber Line (SDSL) connection between your PC or LAN and the telephone company’s

network of high-speed digital facilities.

This section covers the following topics:

■

“Features and capabilities” on page 1-1

■

“How to use this guide” on page 1-2

Features and capabilities

The Netopia R7200 SDSL Router provides the following features:

■

Certiﬁed for use with the Speedlink™ access concentrator from Nokia

■

Support for IP and IPX routing for Internet and intranet connectivity

■

IP address serving (over Ethernet or a WAN link) that allows local or remote network nodes to acquire an IP

address automatically and dynamically from a designated pool of available addresses

■

Multi-speed symmetrical transmission from 192 Kbps up to 1.5 Mbps to provide scalability without

additional equipment investment

■

All digital, continuous-availability networking, eliminating dialing and providing lower, more predictable

transmission costs

■

Connectivity to Ethernet LANs via a built-in 8-port 10Base-T hub with uplink port

■

Status lights (LEDs) for easy monitoring and troubleshooting

■

Support for console-based management over Telnet or serial cable connection

■

Support for remote conﬁguration by your reseller, your network administrator, or technicians at Netopia,

Inc., via external modem or via IP network

■

Wall-mountable, bookshelf (side-stackable), or desktop-stackable design for efﬁcient space usage

■

SmartIP™, making it simple and economical to connect a workgroup of users to the Internet or a remote IP

network by using Network Address Translation and a single IP address

■

AppleTalk support (available as a separate add-on AppleTalk kit, including a ﬁrmware feature set

enhancement and custom HD-15 dual RJ-11 PhoneNET® connector), allowing for LocalTalk-to-Ethernet

routing, assigning IP addresses to Macintosh users (MacIP), IP functionality for LocalTalk users, and AURP

1-2 User’s Reference Guide

tunneling for connectivity between remote AppleTalk networks

■

Web-based management pages aid in managing your router. Internet browsers such as Netscape Navigator

and Microsoft’s Internet Explorer can be used for the web-based management pages.

How to use this guide

This guide is designed to be your single source for information about your Netopia R7200 SDSL Router. It is

intended to be viewed on-line, using the powerful features of the Adobe Acrobat Reader. The information display

has been deliberately designed to present the maximum information in the minimum space on your screen. You

can keep this document open while you perform any of the procedures described and ﬁnd useful information

about the procedure you are performing.

If you prefer to work from hard copy rather than on-line documentation, you can also print out all of the manual,

or individual sections. The pages are formatted to print on standard 8 1/2 by 11 inch paper. We recommend

that you print on three-hole punched paper, so you can put the pages in a binder for future reference. For your

convenience, a printed copy can be purchased from Netopia. Order part number TER7200/Doc.

This guide is organized into chapters describing the Netopia R7200’s advanced features. You may want to read

each chapter’s introductory section to familiarize yourself with the various features available.

Use the guide’s table of contents and index to locate informational topics.

Setting Up Internet Services 2-1

CC

hh

aa

pp

tt

ee

rr

22

SS

ee

tt

ii

nn

gg

UU

pp

II

nn

tt

ee

rr

nn

ee

tt

SS

ee

rr

vv

ii

cc

ee

ss

This chapter describes how to obtain and set up Internet services.

This section covers the following topics:

■

“Finding an Internet service provider” on page 2-1

■

“Deciding on an ISP account” on page 2-2

■

“Obtaining information from the ISP” on page 2-3

Note:

Some companies act as their own ISP. For example, some organizations have branch ofﬁces that can

use the Netopia R7200 to access the Internet via the main ofﬁce in a point-to-point scenario. If you install the

Netopia R7200 in this type of environment, refer to the following sections for speciﬁc information you must

receive from the network administrator to conﬁgure the Netopia R7200 properly.

Finding an Internet service provider

The Netopia R7200 SDSL Router provides its high speed symmetric (two-way) digital connection to the Internet

through a Competitive Local Exchange Carrier (CLEC) -- a type of mini phone company. The CLEC uses a

compatible type of switching equipment known as a Digital Subscriber Line Access Multiplexer (DSLAM). The

DSLAM that you connect to with your Netopia Router must be capable of handling these symmetric connections.

The Netopia R7200 is certiﬁed for use with the Nokia Speedlink™ DSLAM.

If you have purchased your Netopia Router through a Netopia ISP partner, you can be sure that an account that

supports SDSL connections will be available.

If your area has more than one ISP, the following considerations will help you decide which ISP is best suited for

your requirements.

In determining which Internet service provider (ISP) to establish your account with, make sure that your ISP

supports connections via a CLEC with a compatible DSLAM, the Nokia’s Speedlink™ central ofﬁce equipment.

Use an ISP that provides Internet access through a Symmetric Digital Subscriber Line (SDSL) and that supports

the Netopia R7200 SDSL Router. If you would like to use an ISP that you already have a relationship with but

that is not familiar with the Netopia R7200, call us at 1-800-NETOPIA. Our representative can call your ISP and

introduce them to the product. If necessary, we will provide them with the technical background they need to

support the product.

2-2 User’s Reference Guide

Unique requirements

Make sure the ISP can meet any unique requirements you may have, such as:

■

Dynamic or static IP addressing

■

Class C IP address

■

Custom domain name

■

Multiple e-mail addresses

■

Web site hosting

Pricing and support

Compare pricing, service, and technical support service among various ISPs.

Endorsements

Consider recommendations from colleagues and reviews in publications. Netopia lists Netopia Certiﬁed ISPs on

our Web site at

http://www.netopia.com

.

Deciding on an ISP account

Your ISP may offer various Internet access account plans. Typically, these plans vary by usage charges and the

number of host IP addresses supplied. Evaluate your networking needs and discuss them with your ISP before

deciding on a plan for your network.

Setting up a Netopia R7200 account

Check whether your ISP has the Netopia R7200 on its list of supported products that have been tested with a

particular conﬁguration. If the ISP does not have the Netopia R7200 on such a list, describe the Netopia R7200

in as much detail as needed, so your ISP account can be optimized. As appropriate, refer your ISP to Netopia’s

Web site www.netopia.com for more information.

Obtaining an IP address

Typically, each network computer that requires Internet access requires its own unique IP address. If some or

all network computers require simultaneous Internet access, obtain a block of IP host addresses large enough

for each computer to have its own address, plus one for the Netopia R7200.

Consider expected growth in your network when deciding on the number of addresses to obtain. Alternatively,

you can use the Network Address Translation feature of SmartIP.

SmartIP

The Netopia R7200 SDSL Router supports the SmartIP™ feature, which includes Network Address Translation.

Network Address Translation provides Internet access to the network connected to the Netopia R7200 using

only a single IP address. These routers translate between the internal or local area network (LAN) addresses

and a single external IP address, and route accordingly.

Setting Up Internet Services 2-3

For more information on Network Address Translation, see Chapter 10, “IP Setup and Network Address

Translation.”

Obtaining information from the ISP

After your account is set up, the ISP should send you the IP parameter information that will help you conﬁgure

the Netopia R7200.

Local LAN IP address information to obtain

Your ISP will need to provide you with the following information:

■

The default gateway IP address (same as remote IP address in most cases)

■

Local WAN IP address and subnet mask

■

Primary and secondary domain name server (DNS) IP addresses

■

Domain name (usually the same as the ISP’s domain name unless you have registered for your own

individual domain name)

Note:

The default gateway, WAN address and mask, DNS, and domain name are all obtainable via WAN DHCP,

if your ISP supports it.

With Network Address Translation

If you are using SmartIP (NAT), you should obtain the following:

■

If you are connecting to a remote site using Network Address Translation on your router, your provider will

not deﬁne the IP address information on your local LAN. You can deﬁne this information based on an IP

conﬁguration that may already be in place for the existing network. Alternatively, you can use the default IP

address range used by the router.

Without Network Address Translation

If you are not using Network Address Translation, you will need to obtain all of the local LAN IP address

information from your ISP.

If you are not using SmartIP (NAT), you should obtain:

■

The number of Ethernet IP host addresses available with your account and the ﬁrst usable IP host address

in the address block

■

The Ethernet IP address for your Netopia R7200

■

The Ethernet IP subnet mask address for your Netopia R7200

2-4 User’s Reference Guide

Making the Physical Connections 3-1

CC

hh

aa

pp

tt

ee

rr

33

MM

aa

kk

ii

nn

gg

tt

hh

ee

PP

hh

yy

ss

ii

cc

aa

ll

CC

oo

nn

ee

cc

tt

ii

oo

nn

ss

This section tells you how to make the physical connections to your Netopia R7200 SDSL Router. This section

covers the following topics:

■

“Find a location” on page 3-1

■

“What you need” on page 3-2

■

“Identify the connectors and attach the cables” on page 3-2

■

“Netopia R7200 SDSL Router back panel ports” on page 3-3

■

“Netopia R7200 SDSL Router status lights” on page 3-4

Find a location

When choosing a location for the Netopia Router, consider:

■

Available space and ease of installation

■

Physical layout of the building and how to best use the physical space available for connecting your Netopia

Router to the LAN

■

Available wiring and jacks

■

Distance from the point of installation to the next device (length of cable or wall wiring)

■ Ease of access to the front of the unit for conﬁguration and monitoring

■ Ease of access to the back of the unit for checking and changing cables

■ Cable length and network size limitations when expanding networks

For small networks, install the Netopia R7200 near one of the LANs. For large networks, you can install the

Netopia R7200 in a wiring closet or a central network administration site.

3-2 User’s Reference Guide

What you need

Locate all items that you need for the installation.

Included in your router package are:

■ The Netopia R7200 SDSL Router

■ A power adapter and cord with a mini-DIN8 connector

■ One RJ-45 Ethernet cable

■ One RJ-11 Telco (or Line) cable

■ A dual DE-9 and mini-DIN8 to DE-9 console cable (for a PC or a Macintosh)

■ The Netopia CD containing an Internet browser, Adobe Acrobat Reader for Windows and Macintosh, ZTerm

terminal emulator software and NCSA Telnet for Macintosh, and documentation

You will need:

■ A Windows 95 or 98–based PC or a Macintosh computer with Ethernet connectivity for conﬁguring the

Netopia R7200. This may be built-in Ethernet or an add-on card, with TCP/IP installed and conﬁgured. See

“Before running SmartStart” on page 5-2.

■ An SDSL wall outlet wired for a connection to a Competitive Local Exchange Carrier (CLEC) who supports

Symmetric Digital Subscriber Line connections.

Identify the connectors and attach the cables

Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.

The ﬁgure below displays the back of the Netopia R7200 SDSL Router.

Netopia R7200 with SDSL back panel

1. Connect the mini-DIN8 connector from the power adapter to the power port, and plug the other end into an

electrical outlet.

2. Connect one end of the RJ-11 cable to the Line port, and the other end to your SDSL wall outlet.

Ethernet

Normal

Auxiliary Console Power

Line

8 port Ethernet hub

Crossover switch

Line port

Auxiliary port

Console port

Power port

8

1

Uplink

Page is loading ...

Netopia R7200 User manual

Netopia R7200 User manual

Related papers

Other documents