ECTACO
®
jetBook
®
COLOR User Manual
13
Use the cover to protect the screen when the device is not in
use.
Do not spill liquid and do not put anything on the device screen.
Do not disassemble the device.
When the screen is soiled, clean it with special wipes that are
utilized for cleaning computer monitors. If you don't have special
wipes, use a soft cloth – for example, flannel. It is okay to wet the
cloth. Wipe the screen gently, without pressure.
Note: Do not use domestic detergents and solvents for cleaning
the screen. Never rub the device screen with an eraser.
Turning the Device on/off
To turn the device on, slide the switch located on the bottom
edge of the device (see page 11) to the right. Hold the switch
shifted within 1-2 seconds. Then release the switch – it will
return to its original position. After a few seconds the device will
begin to start. It may take about 1 minute for the device to start
up. When the startup process is finished, you will see the Main
Menu.
To turn the device off, slide the switch to the right and hold it
shifted within 5 seconds. All applications will be automatically
closed; the device will turn off.
Note: If you frequently use the device, it is not necessary to turn it
off.
Lock the keyboard to avoid inadvertent key presses when
carrying the device – slide the switch to the right and
immediately release it. To unlock the keyboard, follow the same
steps.
After an optimally chosen amount of time has elapsed, the device
automatically goes to sleep mode, which conserves battery power.
The screen won't go blank, however the power consumption will
decrease considerably. To resume working, just press any key on
the device. In this case, you don't need to re-open the desired