Biostar TP35D3-A7 Deluxe Owner's manual

TP35D3-A7 Deluxe Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed

to provide re asonable protec tion against harmful interfere nce in a residential

installation. T his equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interfe rence will not occur in a particular ins tallation.

The ve ndor makes no re presentatio ns or wa rranties with respec t to the

contents here and specially disclaims any implied warranties of merchantability

o r fi tness fo r a ny purp os e . F urthe r the ve nd o r res e rves t he ri ght to rev is e t his

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplication of this publication, in part or in whole , is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mis takes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ............................................. 1

1.1 Be fore You Start.......................................................................... 1

1.2 Package Checklist....................................................................... 1

1.3 Motherboard Features................................................................. 2

1.4 Re ar Panel Connectors (for Ve r 5.x) .............................................. 4

1.5 Rear Panel Conne ctors (for Ve r 6.x ).............................................. 4

1.6 Mothe rboard Layout ................................................................... 5

Chapter 2: Hardware Installation.............................. 6

2.1 Installing Central Processing Unit (CPU)....................................... 6

2.2 FAN Headers............................................................................... 8

2.3 Installing System Memory............................................................. 9

2.4 Conne ctors and Slots ...................................................................11

Chapter 3: Headers & Jumpers Setup .....................13

3.1 How to Setup J umpers.................................................................13

3.2 Detail Se ttings............................................................................13

Chapter 4: RAID Functions.......................................20

4.1 Operation System.......................................................................20

4.2 Raid Arrays................................................................................20

4.3 How RAID Works........................................................................20

Chapter 5: OverClock Quick Guide ..........................24

5.1 T-Power Introduction..................................................................24

5.2 T-Powe r BIOS Fe ature ................................................................25

5.3 T-Powe r Windows Fe ature ..........................................................31

Chapter 6: Useful Help .............................................36

6.1 Driver Installation Note ..............................................................36

6.2 Award BIOS Beep Code...............................................................37

6.3 Extra Information.......................................................................37

6.4 Troubleshooting..........................................................................39

Appendencies: SPEC In Other Language ................40

German................................................................................................40

France..................................................................................................42

Italian..................................................................................................44

Spanish ................................................................................................46

Portuguese...........................................................................................48

Polish...................................................................................................50

Russian................................................................................................52

Arabic..................................................................................................54

Japanese ..............................................................................................56

TP35D3-A7 Deluxe

1

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk yo u for choosing our product. Before yo u sta rt installing the

mo the rboa rd , plea se make sure you fo llo w the instructions be lo w:

 Prepare a dry and stable working environment with

s ufficie nt ligh ting.

 Always disconnect the computer from power outlet

be fo re ope ra tion.

 Befo re you take the m o the rboa rd ou t f rom a n ti -s ta tic

bag, ground yourself properly by touching any safely

grounde d appliance, or use grounded wrist strap to

remove the static charge.

 Avo id tou ch ing the compone nts o n mo the rboa rd o r the

rear side of the board unless necessary. Hold the board

on the edge, do not try to be nd or flex the board.

 Do not lea ve any unfastened small pa rts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source , humid a ir and wa ter.

1.2 PACKAGE CHECKLIST

HDD Cable X 1

Se ria l ATA Cab le X 6

Rear I/O Panel for ATX Case X 1

User’s Manual X 1

Fully Setup Driver CD X 1

S/PDIF out Cable X 1

Se ria l ATA Po we r Cab le X 6

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

Motherboard Manual

2

1.3 MOT HERBOARD FEATURES

Ve r 5.x Ve r 6.x

CPU

LGA 775

Intel Core2Duo / Core2Quad / Celeron 4xx /

Pentium D / Pentium 4 processor

S upp o rts H y pe r -T h re a d i ng / Ex ec ute D is a bl e Bi t /

Enhanced Intel SpeedStep® / Intel

Architecture-64 / Extended Memory 64

Technology / Virtualization Tec hnology

LGA 775

Intel Core2Duo / Core2Quad / Celeron 4xx /

Pentium D / Pentium 4 processor

S upp o rts H y pe r -T h re a d i ng / Ex ec ute D is a bl e Bi t /

Enhanced Intel SpeedStep® / Intel

Architecture-64 / Extended Memory 64

Technology / Virtualization Tec hnology

FSB Support 800 / 1066 / 1333 MHz Support 800 / 1066 / 1333 MHz

Chipset

Intel P35

Intel ICH9R

Intel P35

Intel ICH9R

Super I/O

ITE 8718F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interfac e

Environment Control initiatives,

Hardware Monitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

ITE 8718F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interfac e

Environment Control initiatives,

Hardware Monitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DIMM Slots x 4

Eac h DIMM supports 512MB / 1GB / 2GB DDR3

Max Memory Capicity 8GB

Dual Channel Mode DDR3 memory module

Supports DDR3 667 / 800 / 1066

Registered DIMM and ECC DIMM is not

supported

DIMM Slots x 4

Eac h DIMM supports 512MB / 1GB / 2GB DDR3

Max Memory Capicity 8GB

Dual Channel Mode DDR3 memory module

Supports DDR3 667 / 800 / 1066

Registered DIMM and ECC DIMM is not

supported

IDE

Marvell 88SE6121

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4

Marvell 88SE6121

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4

SA TA 2

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant

LAN

Marvell 88E8056 x2

10 / 100 Mb/s / 1Gb/s auto negotiation

Half / Full duplex capability

Marvell 88E8056 x2

10 / 100 Mb/s / 1Gb/s auto negotiation

Half / Full duplex capability

TP35D3-A7 Deluxe

3

Ve r 5.x Ve r 6.x

Sound

Codec

ALC888

7.1 c hannels audio out

High Definition Audio

ALC861VD

5.1 c hannels audio out

High Definition Audio

PCI slot x2 PCI slot x2

PCI Express x 16 slot x1 PCI Express x 16 slot x1

Slots

PCI Express x 1 slot x3 PCI Express x 1 slot x3

Floppy connector x1 Floppy connector x1

Printer Port Connector x1 Printer Port Connector x1

IDE Connector x1 IDE Connector x1

SA TA Connect or x6 SA TA C onnect or x6

Front Panel Connector x1 Front Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

CD-in Connec tor x1 CD-in Connec tor x1

S/PDIF out connector x1 S/PDIF out connector x1

S/PDIF in connector(optional) x1 S/PDIF in connector(optional) x1

CPU Fan header x1 CPU Fan header x1

Sys tem Fan header x2 S ys tem Fan header x2

Clear CMOS header x1 Clear CMOS header x1

USB connector x3 USB connector x3

S eria l port C onnect or x1 S e ri al port C onnect or x1

Power Connector (24pin) x1 Power Connector (24pin) x1

Power Connector (8pin) x1 Power Connector (8pin) x1

On Board

Connector

Power Connector (4pin) x1 Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

eSATA Port (Marvell 88SE6121) x2

LAN port x2

USB Port x6

Audio Jack x6

PS/2 Keyboard x1

PS/2 Mouse x1

eSATA Port (Marvell 88SE6121) x2

LAN port x2

USB Port x6

Audio Jack x3

Board Size 244 (W) x 305 (L) mm 244 (W) x 305 (L) mm

Special

Features

RAID 0 / 1 / 5 / 0+1 support RAID 0 / 1 / 5 / 0+1 support

OS Support

Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS with or without notice

Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS with or without notice

Motherboard Manual

4

1.4 REAR PANEL CONNECT ORS (FOR VER 5.X)

Lin e I n

Lin e O ut

Mi c I n

Ce nt er

Re ar

Si de

PS/ 2

Mo use

PS/ 2

Keyboard

US BX2 USB X2

LAN

US BX 2

A u dio Ja ck

LAN

eSATAX 2

1.5 REAR PANEL CONNECT ORS (FOR VER 6.X)

PS/ 2

Mo use

PS/ 2

Keyboard

US BX2 USB X2

LAN

USBX2

Li ne In /

Surround

Lin e Ou t

Mic In 1/

Bass/ Center

LAN

eSATAX 2

TP35D3-A7 Deluxe

5

1.6 MOT HERBOARD LAYOUT

BI OS

FDD1

PC I- EX1

PCI1

JATXPWR2

JCFAN1

JAT XPWR1

SATA1

SATA5

LAN

JSFAN1

BAT1

LGA775

CPU1

JKBMS1

JRJ45USB2

JAUDIO1

(f or Ver 5.x)

J SPD I F_ O UT1

IDE1

SATA2

SATA4

DDR3_A1

DDR3_B1

DDR3_A2

DDR3_B2

Sup er

I/O

JU SB 1

RSTSW1

PCI -EX1_3

PCI2

JNFAN1

JCMO S1

JPRNT 1

LED2LED1

JSPDIF_IN 1

(optional)

JUSB4

JC DIN1J AUDI OF1

J USB3

JPANEL 1

PW R S W 1

JUSB5

Intel

P35

Intel

ICH9R

JA UD IO2

(for Ver 6.x)

E SATAX1

JRJ45USB1

LAN

CO DEC

JC OM1

PCI -EX1_2

PCI -EX1_1

J1

SATA3

SATA6

Not e: represents the 1■

st

pin.

Motherboard Manual

6

CHAPTER 2: HARDWARE INSTALLATION

2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation

for future use. When the CPU is removed, cover the Pin Cap on the

empty socket to ensure pin legs won’t be damaged.

Pin Ca p

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.

TP35D3-A7 Deluxe

7

Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will

fit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into

the JCFAN1. This completes the installation.

Motherboard Manual

8

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3

FAN RPM rate

sense

14

4 Smart Fan

Control

JSFAN1: System Fan Header

JNFAN1: Northbridge Fan Header

Assignment

1 Ground

2 +12V

13

JSFAN1

JNFAN1

13

3 FAN RPM rate

sense

Note:

The JNFAN1 a nd JSFAN1 s up port 3-pin hea d c onnect or. Wh en c on necti ng with wires

ont o connec tors, pleas e n ote th at t he r ed wir e is th e positive a nd s ho uld be c onn ect ed t o

pin# 2, a nd th e bl ac k wir e is Gro und a nd s ho uld b e c onn ect ed t o GND.

TP35D3-A7 Deluxe

9

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DDR3_A1

DDR3_B1

DDR3_A2

DDR3_B2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

B. Mem ory Capacity

DIMM Socket

Location

DDR3 Module

To t a l Me m o r y

Size

DDR3_A1 512MB/1GB/2GB

DDR3_A2 512MB/1GB/2GB

DDR3_B1 512MB/1GB/2GB

DDR3_B2 512MB/1GB/2GB

Max is 8GB.

Motherboard Manual

10

C. D ual Chann el Mem ory installation

To trigger the Dual Channel f unction of the motherboard, the memory module

must meet the following requirements:

Install memory module of the same density in pairs, shown in the f ollowing

table.

Dual Channel Status

DDR3_A1

DDR3_A2 DDR3_B1 DDR3_B2

Enabled O X O X

Enabled X O X O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or

x16)

TP35D3-A7 Deluxe

11

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Conne ctor

The motherboard prov ides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the

prov ided f loppy drive ribbon cables.

34 33

12

ID E1: Hard Di sk C onne ctor

The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO

Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.

The IDE connector can connect a master and a slave drive, so y ou can connect

up to two hard disk driv es.

12

40 39

Motherboard Manual

12

PCI-EX1: PCI-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously per

direction, f or an aggregate of 8GB/s totally.

PCI-EX1_1/PCI-EX1_2/PCI-EX1_3: PCI-Express x1 Slots

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 250MB/s simultaneously per

direction, f or an aggregate of 500MB/s totally.

PCI-EX1

PCI-EX1_3

PCI-EX1_2

PCI-EX1_1

PCI1/PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands f or

Peripheral Component Interconnect, and it is a bus standard for expansion

cards. These PCI slots are designated as 32 bits.

PCI2

PCI1

TP35D3-A7 Deluxe

13

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SET UP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is

placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DET AIL SET T ING S

JPANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep

button and speaker connection. It allows user to connect the PC case’s f ront

panel switch functions.

1

9

8

16

SLP

PWR_LED

On/Off

RST

HL ED

SPK

++

+

-

Pin Assignment Functio n Pin Assignment Functio n

1 +5V 9 Sleep control

2 N/A 10 Ground

Sleep button

3 N/A 11 N/A N/A

4 Speaker

Speaker

Connector

12 Power LED (+)

5 HDD LED (+) 13 Power LED (+)

6 HDD LED (-)

Hard drive

LED

14 Power LED (-)

Power LED

7 Ground 15 Power button

8 Reset control

Reset button

16 Ground

Power-on button

Motherboard Manual

14

J ATXPW R2 : ATX P o we r S ou rce C onne cto r

JATXPW2 allows user to connect 24-pin power connector on the ATX power

supply.

1

12

13

24

Pin Assignment Pin Assignment

13 +3.3V 1 + 3.3V

14 -12V 2 +3.3V

15 Gr ound 3 Gr ound

16 PS_ON 4 +5V

17 Gr ound 5 Gr ound

18 Gr ound 6 +5V

19 Gr ound 7 Gr ound

20 NC 8 PW_ OK

21 +5V 9 Stand b y Volt age+ 5V

22 +5V 10 +12V

23 +5V 11 +12V

24 Gr ound 12 +3.3V

J ATXPW R1 : ATX P o we r S ou rce C onne cto r

By connecting this connector, it will provide +12V to CPU power circuit.

Assignment

1 +12V

2 +12V

3 +12V

4 +12V

5 Ground

6 Ground

7 Ground

5

8

1

4

8 Ground

TP35D3-A7 Deluxe

15

JUSB3/JUSB4/JUSB5: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC f ront panel,

and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

1

2

9

10

JUSB5

JUSB3

JUSB4

10 NC

JAUDIO F1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC f ront

panel. It will disable the output on back panel audio connectors.

Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

6 Jack Sense

7 Front Sense

8 Key

9 Left line in

1

2

9

10

10 Jack Sense

JCDIN1: CD-RO M Audio-in Connector

This connector allows user to connect the audio source f rom the v ariaty dev ices,

like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Assignment

1 Left Channel

Input

2 Ground

3 Ground

14

4 Right Channel

Input

Motherboard Manual

16

JCMOS1: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting

and the CMOS data, please carefully f ollow the procedures to avoid damaging

the motherboard.

13

Pin 1-2 Close:

Normal Operation (default).

13

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remov e AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait f or five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset y our desired password or clear the CMOS data.

SATA1~SATA6: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 6 channels SATA interf ace,

it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

147

SATA2 SATA 1

SATA4 SATA 3

SATA6 SATA 5

7 Ground

TP35D3-A7 Deluxe

17

JSPDIF_O UT1: Digi tal Au di o-out C onne ctor

This connector allows user to connect the PCI bracket SPDIF output header.

Assignment

1 +5V

2 SPDIF_OUT

13

3 Ground

JSPDIF_IN1: Digital Audio-in Connector (Optional)

This connector allows user to connect the PCI bracket SPDIF input header.

Assignment

1 +5V

2 SPDIF_IN

13

3 Ground

JCO M1: Se rial port Conne ctor

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Assignment

1 Carrier detect

2 Received data

3 Transmitted data

4 Data terminal ready

5 Signal ground

6 Data set ready

7 Request to send

8 Clear to send

9 Ring indicator

19

210

10 Key

Motherboard Manual

18

On-Board LED Indicators

There are 2 LED indicators on the motherboard to show system status.

LE D 2LE D 1

LED1 and LED2:

These 2 LED indicate system power on diagnostics.

Please ref er to the table below for different messages:

LED1 LED2 Messag e

ON ON Normal

ON OFF Memor y Error

OFF ON VGA Err or

OFF OFF Abnormal: CPU / Chi pset error.

On-Board Buttons

There are 2 on-board buttons.

RST SW 1 PWRSW1

PWRSW1:

This is an on-board Power Switch button.

RSTSW1:

This is an on-board Reset button.

Page is loading ...

Biostar TP35D3-A7 Deluxe Owner's manual

Biostar TP35D3-A7 Deluxe Owner's manual

Related papers

Other documents