2. TOPAZ
  3. F-LUHBE
F-LUHBE

TOPAZ F-LUHBE User manual

  • Hello! I've analyzed the installation instructions for the TOPAZ LED High Bay Fixture F-LUHBE/150W/5K-86. This document includes crucial safety warnings and detailed instructions for mounting, wiring, and securing the fixture. I am ready to answer any questions you have regarding the product or the provided instructions.
  • What should I do if I am not familiar with electrical codes?
    What should I check before installing the fixture?
    What should I do with purple and gray wires if I don’t need dimming?
1
Items:
F-LUHBE/150W/5K-86
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
LED Round High Bay Fixture
INSTALLATION INSTRUCTIONS
WARNING
CAUTION
Do not expose wires to any sharp objects such as sheet metal to prevent
wiring damage or abrasion.
To avoid risk of burn, be sure fixture temperature is cool enough to touch
before handling.
While the light is on, please avoid direct eye exposure.
Combus�ble materials should be kept away from fixture/lens.
Make all electrical and grounded connec�ons in accordance with local
codes or the Na�onal Electrical Code. If you are not familiar with these
codes and requirements, consult a qualified electrician. This professional
should be familiar with the construc�on and opera�on of this product and
hazards involved. Failure to do so may result in serious personal injury.
To reduce the risk of fire, electric shock, personal injury, or property
damage, please read and follow all safety instruc�ons. If you do not
understand these instruc�ons or if any addi�onal informa�on is required,
contact your local Topaz representa�ve. Retain these instruc�ons for
maintenance reference.
Make certain electrical supply is OFF before energizing fixture.
Do not exceed the allowed supply voltage marked on the luminaire label
informa�on.
LED Round High Bay Fixture
INSTALLATION INSTRUCTIONS
2
ELECTRICAL PARAMETERS
INSTALLATION STEPS
Model No. Input
Voltage
Frequency Power Rated
Current
F-LUHBE/150W/5K-86 AC120-277V 50/60Hz 150W 1.8/0.6A
1.Open packaging and Remove the new round LED high bay. Handle new
LED fixture with care and inspect for any damages. If there are any
damages, call your Topaz local rep for replacement.
2.Install the enclosed bolt hook into the top of the luminaire and �ghten
securely. Tighten the screw with a Philips head screwdriver to prevent
the bolt hook from loosening. (See Figure 1). WARNING FAILURE TO
TIGHTEN SCREW COULD CAUSE LUMINAIRE TO FALL RESULTING IN
INJURY, DEATH OR SERIOUS PROPERTY DAMAGE.
3. Install the fixture to the hook and secure the safety chain.
(see Figure 3).
Note: safety cable must be used for all high bay applica�ons.
Fixture Dimension
LED Round High Bay Fixture
INSTALLATION INSTRUCTIONS
3
Failure to follow any of these instruc�ons could void product warran�es. For a
complete lis�ng of product Terms and Condi�ons, please visit www.topaz-usa.com/led-
fixtures-warranty
4. Tighten screws to secure moun�ng bolt hook. (see Figure 4).
Wiring diagram:
5.Connect the LED high bay to power. (Blacktoblack, white towhite
and greentogreen) Purple and gray wires are for 0 10V dimming.
Cap purple and gray wire separately when not used.
120/277VAC
208/240VAC(SPLIT PHASE WIRING)
DIAGRAM USA 3 WIRE)
/