866-905-7625 | Tech@RAINGLER.com | Raingler.com
Step 1
Slide both front seats forward to have good access to installing the straps. You will
reposition them in normal locations before doing final tensioning.6
Step 2
With logo facing the rear, loosely wrap each strap around roll bar
at top above and just behind the front seat headrest. Attach the
handle straps feeding from behind the handle and then back to the
front of the net into the buckle and loosely tighten.
Step 3
Wrap the lower strap under the floor bracket for the front seats.
Step 4
Slide the seats into normal position, checking how much recline
ability you’d like and then pull the straps tight, starting at top first,
then the floor and lastly the middle handle straps.